Fjernstyrt - side 15

Hunting Panther G R & S / 2.4GHZ / Wooden Box Metal Chains / Metal Gear Box / QC, RC

Amewi 23068 Radiostyrt (RC) modell Tank Elektrisk motor 1:16

Amewi 22616 Radiostyrt (RC) modell Dumper Elektrisk motor 1:14

Amewi 23123 Radiostyrt (RC) modell Tank Elektrisk motor 1:16

Amewi AFX4 Radiostyrt (RC) modell Helikopter Elektrisk motor

Amewi 26099 Radiostyrt (RC) modell Båt Elektrisk motor

Amewi Crazist Radiostyrt (RC) modell Monster truck Elektrisk motor 1:10

1000 V Sort, Rød

Jamara 460325 Gynge- og kjøreleke Sitte på-bil

Jamara Quad Protector Sitte på-firehjuling

27 mm, A4 (210 x 297 mm), 270 sheets, white, thermal binding cover, for Bindomatic 1000, 101 DFS, 201 DFS, 5000

Amewi Dark Rampage Radiostyrt (RC) modell Buggy Elektrisk motor 1:12

Amewi CoolRC DIY Desert Buggy 2WD 1:18 Radiostyrt (RC) modell Elektrisk motor

SkyRC NC2500 Pro AA / AAA charger
The SkyRC NC2500 Pro charger allows not only charging AA and AAA batteries, but also regenerating them. The device offers several different modes of operation, and has the added advantage of a run-in function that allows you to run-in model motors that have not been used for a long time. You also have a USB port that supports QC 3.0 fast charging, and the charger is equipped with 6 battery slots.

As many as 4 available features
The NC2500 Pro offers as many as 4 modes of operation. This way you can not only charge the batteries of your choice, but also discharge or regenerate them. In this way you will extend their life! A brake-in function is also available. All this will allow you to optimize the operation of your batteries, take care of their condition, and even protect them from wear and tear or damage!

Charge 6 batteries simultaneously
With the NC2500 Pro you can charge up to 6 batteries simultaneously. The device is equipped with 6 slots and offers a maximum current of 2.5A. The charger also offers a special Step Charging mode, which allows you to adjust the amperage for successive charging steps. So you can take even better care of the condition of your batteries and enjoy their optimal performance!

Easy operation
Convenient operation of the device is enabled by a special dial. The charger is also equipped with an easy-to-read display, so you can check the current amperage, voltage and capacity for each channel at any time. On the screen you will also find information about the current operation mode and elapsed time. Just take a look!

Effective protection against overheating
Don't worry that your battery will overheat and be damaged. The charger uses an innovative FlexiPulse algorithm that prevents similar problems! When the device detects that the cell's internal resistance increases above a certain level during charging, it will automatically reduce the amperage to maintain the right temperature. In this way, it will protect the battery from overheating!

Run-in function
The NC2500 Pro is more than just a charger. The device offers an additional run-in function. It allows you to run-in model motors that have not been used for a long time. In this way you will prepare them for the next races and gain confidence that they will not let you down! Bet on proven solutions and achieve better and better results.

Additional USB port - fast charging
With the NC2500 Pro charger you can also charge your phone in a short time. The device is equipped with an additional USB port and supports QC2.0 / QC3.0 fast charging. It also provides voltage and current at 5V / 3A and 9V / 2A. This makes the charger perfect for a variety of scenarios. You no longer have to wait too long for your smartphone to be ready for use!

In the box
BD350 battery discharger / tester
XT60 connection cable

Amewi 22592 Radiostyrt (RC) modell Crawler Elektrisk motor 1:10

Specifically for FPV, the Tattu brand has designed new batteries of unrivalled quality. They offer exceptional power whether you're using smaller drones for recreational use or heavy rigs for computing applications. Batteries often look similar from the outside - their real strength, however, lies inside. The cells in Tattu batteries are developed specifically for the requirements of FPV.

Amewi Daphoenodon Radiostyrt (RC) modell Monster truck Elektrisk motor 1:12

Amewi Dune Radiostyrt (RC) modell Off-road Elektrisk motor 1:10

SkyRC e3 Duo charger is the successor to the two-channel version of one of the most popular SkyRC chargers. E3 Duo allows you to charge batteries LiPo, Life, LiHV 2-3S with 20 W per channel and a maximum charging current of 2.2 A. Adjust the charging current to the capacity of the battery by selecting the appropriate value - 0.5, 1, 1.5 or 2.2 A.

Specifically for UAVs, the Tattu brand has designed new batteries of unrivalled quality. They offer exceptional power whether you are using smaller drones for recreational use or heavy platforms for commercial applications. Batteries often look similar from the outside - their true strength, however, lies within. The cells in Tattu batteries are developed specifically for UAV requirements.

AM18 Scale Crawler 4x4 RTR, RC, grå

Hobbywing Xerun AXE R2 BL ESC Radiostyrte (RC) modell deler og tilbehør Controller

The SkyRC TLD001 Thermologger Duo thermometer
SkyRC Thermologger Duo is an innovative device that provides precise temperature measurements to optimize the performance of your RC model. With advanced temperature sensors, Bluetooth communication and easy installation, the Thermologger Duo is an essential tool for hobbyists and RC professionals. In addition, the device's compact size and long battery life make it practical and convenient to use. With this device, you will be able to improve the performance of your RC model and share your results with other enthusiasts.

Precise measurements
You no longer need to check the temperature of your devices with your hands. Use the SkyRC thermometer for that! The Thermologger Duo provides precise temperature measurements with fast response time. Its accuracy is ±2.0℃(35.6℉) for temperatures between -20℃(-4℉) and 100℃(212℉) to ±2% for temperatures above 100℃(212℉). With temperature sensors that meet industry standards, you can easily measure the contact temperature of various components such as motors, ESCs, heat sinks and wires. The dual-channel function allows you to measure the temperature of two different contacts simultaneously. Moreover, Thermologger Duo has a wide temperature detection range of -20℃ to 210℃（-4℉-410℉).

Easy communication
With built-in Bluetooth, the Thermologger Duo allows instant communication via a mobile app, eliminating the need for cables. With it, you can easily read data, check thermograms and troubleshoot problems while building successful modifications and maximizing uptime. In addition, you can capture mechanical, electrical and thermal measurements in it, which you can look at wherever you are from your smartphone, tablet or computer. Plus, you can easily share measurements with others!

Comfort of use
The Thermologger Duo is designed for easy installation in the field, so it comes with two pairs of 30 cm cables. The kit also includes high-quality copper foil stickers with excellent electrical conductivity, adhesion, flexibility and temperature resistance. What's more, you can adjust them to almost any shape. Mount the recorder with the clamp, cut the wires and mount with the sticker!

Long working time
Thermologger Duo is compact (its dimensions are only 38 × 30 × 16 mm), but demonstrates long operating time. It is powered by a CR2450 battery, which is included with the device and allows about 96 hours of continuous operation under normal conditions. When the battery eventually runs out, it can be easily replaced by unscrewing the cover.

In the set
thermometer
CR2450 battery
wires
copper foil stickers

Jamara AUDI R8 LMS

Akumulator Gens Ace 2200mAh 7,2V NiMH Tamiya