Bacteria for biological purification of the pond

For water to suit both fish and plants: cleansing bacteria for the breakdown of biological contaminants in the garden pond
Easy to use: calculate the amount needed, mix it with pond water in a watering can, pour it evenly over the pond
Healthy pond water: removal of excess nutrients by the break down of biological waste
Avoiding fish loss, preventing algae
Dosage: 40 ml for about 700 - 800 l pond water

Bacteria for biological purification of the pond. For water to suit both fish and plants: cleansing bacteria for the breakdown of biological contaminants in the garden pond (protein, ammonium/ammonia, nitrite). Easy to use: calculate the amount needed, mix it with pond water in a watering can, pour it evenly over the pond. Healthy pond water: removal of excess nutrients by the break down of biological waste. Avoiding fish loss, preventing algae. Contents: bacteria for self-purification, BactoPond. Dosage: 40 ml per about 700 - 800 l pond water

CO2 fertiliser system complete set with 2 pressure gauges, night switch-off and diposable cylinder for vigorous and beautiful aquarium plants. Ready-to-connect CO2 fertiliser system with solenoid valve for night switch-off. Provides the ideal supply for all aquarium plants in freshwater aquariums from 40 to 600 l while preventing algae. Simple assembly: screw the pressure reducer with its mounted solenoid valve onto the cylinder, connect the hose with the bubble counter/check valve and reactor. Plug the solenoid valve into the timer (not included), set the bubble count - done. Disposable storage cylinder. No hose slippage thanks to hose screw connections, check valve prevents water from entering the cylinder. Pressure gauges show cylinder and working pressure. The correct CO2 concentration in the aquarium water is checked via the display of the CO2/pH permanent test included and can be readjusted if required. Contents: 500 g disposable CO2 cylinder, pressure reducer with solenoid valve, 3 m hose, bubble counter with check valve, TAIFUN CO2 reactor + extension set, CO2/pH permanent test with reagents

JBL - CristalProfi e1902 Greenline
External filter for clean and healthy aquarium water: closed water circulation system for aquariums with 200-800 liters (120-150 cm)
Fully equipped and ready to connect: built-in quick-start priming button, filter start without manual priming. Simple installation
Extremely smooth operation at 1900 l/h pump output. Patented pre-filter system, 100% more surface than in model 1901. High/biological filter performance. with a volume of 15l, water stop, 360° rotation. hose connections, easily replaceable filter media
TÜV-tested, safe and energy efficient: huge energy savings. Warranty: 2 years ((+2 years upon registration of the product)
Package contents: external filter unit for aquariums, incl. hoses & pipes 19/27 mm, suction strainer, elbow, suction cups, filter media (biofilter balls and biofilter foam), dimensions (L/H/W): 20 x 23 x 55.5 cm

Monitors water values in aquariums simply and reliably. Determines pH (3 ranges), carbonate hardness, general hardness, ammonium/ammonia, nitrite, nitrate, phosphate, iron, copper, silicate, oxygen, and, with the help of a table, the CO2 calculation
Add the reagents to the water samples, compare on the colour chart, read off the values and check the analysis sheet to see which actions are recommended, if any
Comparator system takes the inherent water colouring into account. CO2-content is determined by pH value and KH value using the table
Contains a childproof reagent bottle in a waterproof plastic case. Refill reagents are separately available
Package contents: 1 test case, incl. 13 tests, 12 glass vials, 2 syringes, 3 measuring spoons, thermometer, comparator block, 2 plastic cuvettes, colour charts, CO2 table, pen, report sheets, operating instructions

CO2 fertiliser system complete set with disposable CO2 cylinder for vigorous and beautiful aquarium plants. Ready-to-connect CO2 fertiliser system. Provides the ideal supply for all aquarium plants in freshwater aquariums from 40 to 300 l while preventing algae. Simple assembly: screw pressure reducer onto cylinder, connect hose with bubble counter/check valve and diffuser, set the bubble count - done. Disposable CO2 storage cylinder. No hose slippage thanks to hose screw connections, check valve prevents water from entering the cylinder. The correct CO2 concentration in the aquarium water is checked via the display of the CO2/pH permanent test included and can be readjusted if required. Package contents: 500 g disposable CO2 cylinder, pressure reducer, 3 m hose, bubble counter with check valve, ceramic diffuser, permanent test with reagents, 2x plant fertiliser 100 ml, 1x daily fertiliser 10 ml

Complete set to calibrate pH electrodes. Professional use of pH electrodes for aquariums: complete set for calibration. Easy to use: fill calibration solutions into cuvettes. Immerse pH electrode in calibration solutions according to instructions and rinse afterwards. pH electrodes need to be readjusted (calibrated) every 30 - max. 60 days. To do this, they are immersed in calibration liquids with a given pH value and the device then readjusts itself. Only 5-10 ml calibration liquid is needed per calibration procedure. Then rinse with distilled water (included in the set). Package contents: calibration set for pH electrodes, incl. calibration solution pH 7 and pH 4 (50 ml each), distilled water for rinsing (50 ml), 3 cuvettes

The bubble counter makes the invisible CO2 gas visible and thus countable. The backflow protection prevents the water from flowing back
Fill bubble counter with water, connect with hose to CO2 system and diffuser, fix outside the aquarium with 2 suction cups on the glass or 2 screws on the furniture
The bubble counter allows you to control the CO2 supply: if there is too little CO2 in the water, the bubble count can be increased in a controlled manner
Safety: hose screw connections prevent accidental loosening of the hoses
Package contents: CO2 bubble counter with built-in check valve; holder with 2 suction cups/screws; dimensions: 105/175/40 mm

Extension for the JBL CO2 reactor PROFLORA CO2 TAIFUN SPIRAL 5 and 10. Extension module for CO2 reactors for changing to larger aquariums or for higher water hardness. Simple installation: disconnect the bottom module with the hose from the JBL TAIFUN SPIRAL reactor, insert the extension module, put it back together - done. Extension of the diffusion path = more CO2 enrichment, 5 module parts with a height of 16 mm each, increases capacity by 200 l aquarium content. Sturdy Makrolon, can be completely dismantled, easy to clean, increases the output by 10 °dKH or 200 l at 4° dKH. Package contents: extension for CO2 high diffusion reactor incl. 1 holding clip and 1 suction cup

Expandable CO2 reactor for healthy plant growth in freshwater aquariums up to 200 l. Loss-free enrichment of the main plant nutrient carbon dioxide: CO2 reactor for freshwater aquariums from 40 to 200 l from a height of 12 cm. Easy to install: use the special CO2 hose to connect the reactor to the CO2 fertiliser system (not included), use the suction holders to position the reactor in the aquarium. Visible and efficient diffusion of CO2, operation without additional pump, no separate bubble counter necessary, easy to clean, completely dismountable, suitable for all common CO2 systems, expandable. Collecting cap to compensate CO2 loss, sturdy Makrolon, up to max. 200 l at 4°KH, up to 100 l at 10°KH. Package contents: CO2 high diffusion reactor with 5 modules + base module with hose connection + collecting cap module on top, 2 holding clips with suction cups, 2 m special CO2 hose, height 11 cm

Refill set for Bio-CO2 fertiliser systems: 1 set supplies 30-80 l aquariums with basic plant nutrient carbon dioxide (mixed with water in the reaction canister) for 40 days
Easy to use: put components A and B into the reaction canister, fill up with water, mix the components

Silent solenoid valve for regulated CO2 addition. Supplement for CO2 fertiliser systems or CO2/pH control units: separate solenoid valve for dosing the CO2 supply in aquariums. Easy to use: integrate the solenoid valve into the CO2 supply hose of the fertiliser system or mount it directly on the JBL CO2 pressure reducer. CO2 addition when needed: setting of CO2 addition by activating a timer or via CO2/pH control unit (timer and control unit not included). Safe and economical: 12 V safety transformer, low heat generation thanks to power input of 0.8 W, up to 50 % CO2 savings, no noise emission, electronic power supply. Package contents: 1 silent solenoid valve with hose securing and universal power supply unit

CO2 adapter for pressure reducer with 5/8" UNF thread on disposable cylinders (M10x1). Adapts the pressure reducer, e.g. JBL PROFLORA u201 (thread: 5/8" UNF), to all disposable cylinders with a M10x1 thread (e.g. JBL PROFLORA CO2 CYLINDER 500 U/1200 U). To assemble: screw the adapter into the pressure reducer, then screw the pressure reducer onto the disposable CO2 cylinder. Adapts all pressure reducers with thread 5/8“ UNF to disposable cylinders with thread M 10x1. Dimensions (l/w/h) 22/24/22 mm. Package contents: 1 adapter for pressure reducer with thread 5/8“ UN on disposable CO2 cylinders with thread type M 10x1

Bio-CO2 fertiliser system for vigorous and beautiful aquarium plants in freshwater aquariums with 40-110 l

Supplies aquarium plants with their main nutrient CO2, for healthy & vigorous growth while preventing algae
Easy to assemble: mix the bio-components with water in the reaction canister, connect the hose with the backflow protection and the reactor. Place the reaction canister in the thermal casing – done
2x40 days of unwavering CO2 production through an immediate and long-term buffer system. Bio-components can be purchased individually for refilling
No CO2 pressurised cylinder necessary. The system works exclusively via a biological process in a high-quality, transparent reaction canister

Bio-CO2 fertilizer system for freshwater aquariums with 10-40 l

Supplies aquarium plants with the main nutrient CO2 for healthy and strong growth and at the same time prevents algae
Very easy to assemble: mix biocomponents with water in the reaction vessel, connect the hose to the diffuser stone - done
CO2 production through biological fermentation process.
40 days of uninterrupted CO2 production through an immediate and long-term buffer system. Biocomponents can be purchased individually for refilling
No CO2 pressure bottle needed. The system works exclusively via a biological process

Protection against backflow of water to CO2 systems.
Prevents water from flowing back from the aquarium into the CO2 technology (check valve). Very easy to install: cut the CO2 hose and insert the non-return valve in between (the arrow points towards the aquarium). Safety: lock nuts prevent the CO2 hose from slipping off. For CO2 hoses with Ø 4/6 mm. Package contents: 1 non-return valve for CO2 systems incl. hose attachment

In-line heater integrated into the hose of the external aquarium filter, removing the need for a heater INSIDE an Aquarium
Easy installation: cut through the hose from the external filter that feeds the water back into the aquarium, insert the external heater in between, insert the plug and set the water temperature you want
The integration in the filter circuit ensures a very even distribution of the water temperature with an accuracy of +/- 0.5 °C and a switching interval of 1.0 °C in the aquarium
LED display of current and desired temperature. Interchangeable, screw-on (3/4'') hose connections for 12/16, 16/22 and 19/25 mm incl. hose securing. Total length 30.5 cm
Package contents: 1 in-line heater 500 W for aquariums from 160-600 l (100-150 cm) with hose connections for 12/16, 16/22 and 19/25 mm and cleaning brush

Recyclable disposable storage cylinder ready-filled with 500 g CO2. CO2 storage cylinder for all CO2 systems. Supplies aquarium plants with their main nutrient carbon dioxide (CO2) while preventing algae. Easy to install: turn the pressure regulator with internal thread onto the external thread (M10x1) of the storage cylinders. Including mounted rubber stand for good stability. Total height with mounted pressure reducer: 37 cm. TÜV-tested, recyclable 500 g disposable CO2 steel cylinder (thread M10x1). Because CO2 liquefies under pressure CO2 pressurised gas cylinders must be in an upright position when in operation. Package contents: disposable cylinder, ready-filled with 500 g CO2, dimensions: 31 x 7.5 cm, thread M10x1

Dedicated CO2-resistant hose for aquariums. For the safe, loss-free conduction of CO2 gas in CO2 fertiliser systems for aquariums. To use: cut the hose to the correct length before insertion. Always keep hose length as short as possible. Dedicated CO2-resistant hose, for all standard CO2 systems, colours: black or transparent/white. Loss-free transport of CO2 gas. Normal air hoses are NOT CO2 gas resistant!. Package contents: 1 dedicated CO2-resistant hose, length: 3 m, Ø 4/6 mm

External filter for clean and healthy aquarium water: closed water circulation system for aquariums of 40-120 liters (40-80 cm)
Fully equipped and ready to connect: built-in quick-start priming button, filter start without manual priming. Simple installation
Extremely smooth operation at 450 l/h pump performance, patented new pre-filter system. 100% more surface than in model 401. High biological filter performance with 4.6 l volume, 360° rotating hose connections, easily replaceable filter media
TÜV-tested, safe and energy efficient: huge energy savings. Warranty: 2 years ((+2 years upon registration of the product)
Package contents: external filter unit for aquariums, incl. hoses & pipes 12/16 mm, suction strainer, elbow, suction cups, filter media (biofilter balls and biofilter foam), dimensions (L/H/W): 18 x 20 x 29.5 cm

External filter for clean and healthy aquarium water: closed water circulation system for aquariums of 60-200 liters (60-100 cm)
Fully equipped and ready to connect: built-in quick-start priming button, filter start without manual priming. Simple installation
Extremely smooth operation at 700 l/h pump performance, patented new pre-filter system, 100% more surface than in model 701. High/biological filter performance. with volume of 6.1l, water stop, 360° rotation. hose connections, easily replaceable filter media
TÜV tested, safe and energy efficient: lower power consumption than comparable previous models – consistent performance. Warranty: 2 years (+2 years after registration of the product)
Package contents: external filter unit for aquariums, incl. hoses & pipes 12/16 mm, suction strainer, elbow, suction cups, filter media (biofilter balls and biofilter foam), dimensions (L/H/W): 18 x 20 x 35 cm

Digital adhering thermometer for aquarium panes

Digital aquarium thermometer that displays water temperatures from 0-40 ° C in 0.1 ° C increments
Insert battery, remove protective film and stick it onto the outside of the pane. The velcro stickers make it detachable
Accuracy: +/- 1.0 °C. Size: 6.5 x 5.0 cm. Digit height: easy readable 2 cm. DO NOT immerse the thermometer in the water!
The exact water temperature passes through the aquarium pane to the temperature contact on the back of the thermometer.
Package contents: 1digital aquarium thermometer, incl. battery (AG13) and velcro stickers for attachment

Bio-CO2 fertiliser system for vigorous and beautiful aquarium plants in freshwater aquariums with 40-80 l

Supplies aquarium plants with their main nutrient CO2, for healthy & vigorous growth while preventing algae
Easy to assemble: mix bio-components with water in reaction canister, connect hose with backflow protection and glass diffuser - done
40 days of unwavering CO2 production through an immediate and long-term buffer system. Bio-components can be purchased individually for refilling
No CO2 pressurised cylinder necessary. The system works exclusively via a biological process in a high-quality, transparent reaction canister

Refillable storage cylinder, ready-filled with 2 kg CO2. CO2 storage cylinder for all CO2 systems. Supplies aquarium plants with their main nutrient carbon dioxide (CO2) while preventing algae. TÜV-tested, refillable 2 kg CO2 reusable cylinder (thread W 21.8 x 1/14). With pressure relief valve for safety. Stands on a foot pedestal. Does not need a holder. Because CO2 liquefies under pressure CO2 pressurised gas cylinders must be in an upright position when in operation. Package contents: refillable cylinder, ready-filled with 2 kg CO2, dimensions: 46 x 11.5 cm, thread W 21.8 x 1/14

Glass CO2 diffuser for freshwater aquariums from 40-300 L.
Beautifully shaped small, but very effective, glass diffuser for dissolving CO2 in the aquarium water, for perfect plant growth. Installation: connect the diffuser to the CO2-carrying hose (4/6) and attach it near the bottom to the pane with a suction cup. Even outflow & effective distribution: special ceramic for particularly small CO2 bubbles, built-in ceramic diaphragm. Easy to clean: place the complete diffuser in cleaning solution (JBL PROCLEAN POWER) for 24 hours. Package contents: 1 glass diffuser, 1 suction cup with clip

High-performance CO2 diffuser for installation within filter hose of external filter. Very efficient CO2 enrichment for perfect plant growth in the aquarium thanks to its installation inside the filter return hose. Cut the water return hose from the external filter, water the membrane of the diffuser, install the INLINE DIFFUSER, connect the CO2 supply hose, adjust the bubble count. Bubble counter, for checking the amount of CO2 added, is integrated. Water backflow protection, to protect the technical parts, is also integrated. 20 % CO2 savings thanks to particularly effective diaphragm. Includes: 1 ready-to-connect high-performance CO2 direct diffuser, wall mount, suction cup and screw attachment