Tilta Nucleus-M Wireless Lens Control System Partial Kit IV

The Tilta Nucleus-M Wireless Lens Control System Partial Kit IV contains the essential elements for pulling focus and iris wirelessly. The kit includes the Nucleus-M FIZ hand unit controller, two Nucleus-M motors, two removable lens belts (DSLR Lens Follow Focus Adapters), two motor power cables, two marking disks for the hand unit, a lanyard for the hand unit, and a battery charger unit. The system enables an AC to pull focus and iris on a prime lens. If you are using a lens that does not have standard cine-style gears, then use the included lens belts to add gears to your lens.

This partial kit is a dual-axis system, typically controlling focus and iris, but the hand unit will allow you to control an additional motor (not included) for zoom control when using a zoom lens. The system can wirelessly pull focus from up to 1000' away, and the batteries can power the hand unit for approximately 10 hours on a single charge (batteries not included). The first motor is powered via the included D-Tap to 7-pin cable; the second motor daisy-chains to the fist via the 7-pin to 7-pin cable for power. The lanyard attaches to the hand control unit, allowing you to wear it around your neck.

Specifications
Operating Frequency 2.4 GHz
Maximum Transmission Distance 492 to 984' / 150 to 300 m
Transmission Channels 15
Emission Power 30 to 100 MW
Current 0.15 A
Voltage 7.2
7.2-14.8 V, external
Battery Type 18650
Operating Temperature Range -4 to 122°F / -20 to 50°C
Material of Construction Aluminum alloy, stainless steel, ABS plastic
Rubber, rosewood
Dimensions 5.6 x 3.6 x 2.8" / 142.0 x 90.5 x 70 mm
Weight 15 oz / 430 g