Fischer Meister-Box GK with screws
Fischer MEISTER-BOX GK Metallisk
367,00 kr
293,60 kr eksl. mva
Rimeligste private frakt: 99,00 kr
Bestillingsvare, 8-10 dager til forsendelse
The fischer MASTER-BOX GK contains, pre-sorted, 50 gypsum plasterboard fixings GK, 38 chipboard screws 4.5 x 35, 6 angle hooks 4.2 x 40, 6 round hooks 4 x 46, and the setting tool. The MASTER-BOX is made from high-quality, impact-resistant plastic and is ideal for workshops and construction sites. The transparent lid gives an overview of the contents at a glance. The fischer MASTER-BOX can be securely closed and can also be refilled with plugs.
Advantages
- The included setting tool combines the drilling and fixing setting functions. It thus allows for a fast and simple installation.
- The sharp, self-tapping thread of the GK enables a secure, positive fit fixing. This achieves a high load-bearing capacity.
- The short fixing length means that only a small amount of space is required behind the board. As a result, the GK can also be used in the case of unknown board thickness and cavity depth.
- The cross-drive recess in the head of the fixing means that the GK can also be screwed out like a screw without a setting tool.
- The GK can be used with the most wide-ranging screws, hooks and eye screws. This allows
for a broad range of applications.
Functioning
- The gypsum plasterboard fixing GK is suitable for pre-positioned installation.
- The GK is screwed flush into the gypsum plasterboard using the setting tool provided. Overtightening the fixing should be avoided. Therefore, the installation torque should be limited when using a battery operated screwdriver.
- Adapted for wood, self-tapping and chipboard screws of 4.0 to 5.0 mm diameter.
- For board thicknesses greater than 15 mm, drill a hole first by using the setting tool.
Advantages
- The included setting tool combines the drilling and fixing setting functions. It thus allows for a fast and simple installation.
- The sharp, self-tapping thread of the GK enables a secure, positive fit fixing. This achieves a high load-bearing capacity.
- The short fixing length means that only a small amount of space is required behind the board. As a result, the GK can also be used in the case of unknown board thickness and cavity depth.
- The cross-drive recess in the head of the fixing means that the GK can also be screwed out like a screw without a setting tool.
- The GK can be used with the most wide-ranging screws, hooks and eye screws. This allows
for a broad range of applications.
Functioning
- The gypsum plasterboard fixing GK is suitable for pre-positioned installation.
- The GK is screwed flush into the gypsum plasterboard using the setting tool provided. Overtightening the fixing should be avoided. Therefore, the installation torque should be limited when using a battery operated screwdriver.
- Adapted for wood, self-tapping and chipboard screws of 4.0 to 5.0 mm diameter.
- For board thicknesses greater than 15 mm, drill a hole first by using the setting tool.
Produsent
Varenummer
2992742
Model
513892
Ean
4048962131376
Til produsentens hjemmeside
Produktfarge
Metallisk
Skruer inkludert
Ja
Antall per pakke
101 stykker
Tekniske detaljer
Produktfarge
Metallisk
Datainnpakking
Skruer inkludert
Ja
Antall per pakke
101 stykker
Ovenstående informasjon/spesifikasjoner er veiledende og kan uten varsel bli endret av produsenten. Det tas forbehold om trykkfeil og illustrerende bilder. Enkelte tekster kan være autogenerert eller maskinoversatt, så derfor kan det forekomme tekster som virker misvisende.