Logic Group ZIF5028 Z-Wave DIN-Rail Smart Module for Automation Systems
ZIF5028 is a Z-Wave based device with 6 relay outputs and 6 digital inputs designed for mounting on a standard M36 DIN rail (EN50022). The 6 relay outputs can be freely controlled over the Z-Wave network and used for various purposes. The 6 digital inputs can be connected, for example, to potential-free contacts or open-collector outputs, allowing them to control other Z-Wave devices by sending commands over the Z-Wave network. ZIF5028 can be used to switch 6 pieces of 230V AC loads that can be freely controlled from the Z-Wave network. Connect up to 6 sensors, such as motion sensors, window or door contacts, and read them via an app or our MATRIX control switch. The 6 relay outputs can be used to control the house's lighting, socket groups, and motors, such as a garage door. All 6 relay outputs are galvanically isolated from each other. The 6 inputs of the ZIF5028 module allow activation of predefined scenes (Central Scene) in a Z-Wave Controller unit. ZIF5028 should be powered with 10-24V DC or 8-24V AC. Activation of Z-Wave inclusion and exclusion is done by activating a switch through a hole in the front of the module. ZIF5028 has a LED indicator on the front for status indication.
Ovenstående informasjon/spesifikasjoner er veiledende og kan uten varsel bli endret av produsenten. Det tas forbehold om trykkfeil og illustrerende bilder. Enkelte tekster kan være autogenerert eller maskinoversatt, så derfor kan det forekomme tekster som virker misvisende.