Netatmo Smart Modulating Thermostat
Control your heating remotely
Use our Energy app or Legrand's Home + Control App to control your heating from your smartphone and change the temperature at home from your bed or from the other side of the world.
Schedule your heating for your return from a holiday.
Right temperature at the right time
The Thermostat uses your answers to 5 questions to create a schedule that’s based on your habits and lifestyle, so you only use the heating when you need it.
Auto-Adapt function
The Netatmo Modulating Thermostat’s Auto-Adapt function uses your home’s insulation and the outdoor temperature to programme when your heat should switch on. So you can have the temperature you want at just the right time.
Auto-Care function
Thanks to its Auto-Care function, the Netatmo Thermostat can tell you when its batteries are low, or notify you of a problem with your heating system’s operation.
Track your consumption
Display your past energy consumption.
Your indoor temperature and boiler activity are recorded continuously in the App.
4 interchangeable colours
Customise your Thermostat with one of the four colour adhesive strips provided.
Mechanics and design
Energy savings, longer battery life.
Translucent plexiglass cube
Opt for a timeless, minimalist design.
Manual temperature adjustment
Press on the Thermostat to change the temperature setting.
Real-time temperature
Display the temperature setting and the real-time temperature in the room.
Product size
Thermostat & Relay: 83x83x22 mm
Power
Thermostat: 3 AAA batteries (2-year lifespan)
Relay: 220/240 V
Sensors and measurements
Temperature (measurements):
Range: 0°C to 50°C (± 0.1°C)
Temperature (setpoint):
Range: 5°C to 30°C (± 0.5°C)
Units: °C only
Requirements
High-speed wireless internet connection needed. Public hotspots not supported
Connectivity specifications
Between the Relay and the Internet box: Wi-Fi 802.11 b/g/n (2.4GHz). Open/WEP/WPA/WPA2-personal (TKIP and AES)
Between the Thermostat and the Relay: radio long-range (868 MHz)
App compatibility
iOS 9 minimum required
Android 4.2 minimum required
PC & Mac through the Webapp
Setup and compatibility
The Netatmo Smart Modulating Thermostat is compatible with OpenTherm boiler
Replaces wired and wireless thermostats
Dry contact Thermostat and Relay, potential free (ON/OFF)
Switching current: max 4 (1) A
Switching voltage: max 250 VAC
Maximum switching capacity: 120 VA (4A load @ 30V, 1A load @ 110V/120V or 0,5A load @ 220V/240V)
Power factor: cos ? > 0.8
Ovenstående informasjon/spesifikasjoner er veiledende og kan uten varsel bli endret av produsenten. Det tas forbehold om trykkfeil og illustrerende bilder. Enkelte tekster kan være autogenerert eller maskinoversatt, så derfor kan det forekomme tekster som virker misvisende.