ELDON Wall mounted 400x400x210

Wall cabinet 400x400x210 MAS0404021R5 Product description: Material: Cabinet: 1.2 mm painted steel for cabinets with a depth of 155 mm / 1.4 mm for cabinets with a depth of 210 or 260 mm / 1.5 mm for cabinets with a depth of 300 or 400 mm, or if the height or width is greater than1000mm. Flange:1.4mm painted steel.Door:1.2mm painted steel/1.5mm for cabinets with a height or width of500mmor more/2m mfor cabinetswithaheightorwidthof800m morabove.Mounting plate:2m mgalvanizedsteel.Cabinet:Folded and fully welded.Four holes8 .5m mdiameterfor wall mounting,pressed into20 .4mdiameter x2mmmachined recesses to allow air circulation behind the back panel.Door :130° opening.Hidden removable hinges secured by hinge pins.Hinges can be mounted for left- or right-hand opening.From size MAS0604015 and above there are two removable mounting profiles in the door.Secure seal with one-piece foamed polyurethane gasket.Externally mountedwith130°opening.Hiddenremovablehingessecuredbyapin.Hingescanbemountedforleftorrightopening.Fromheight300mma ndabove,therearestudsformountingprofilesfordoorsMMDP,andfromheight600andover,internaldoorprofilesareincludedasstandard.One-piecepolyurethanesealing.Lock:Cust om lockwithDINlockforeasydooropening.DIN3mminsertand90°movement.Cabinets1000mmmhighandabovehaveathree-pointespagnoletlocking.Otherinsertsaresuppliedasaccessories.Mountingplate:The mounting plate is marked vertically at10 mmincrements for easy horizontal positioning of equipment.There are holes at the top and bottom for cable fastening.Attached to M8 screws spot welded on the back panel of the cabinet.All sides from 800 mm and above are reinforced with folded edges.Using AMG accessories, the position of the mounting plate can be adjusted to any depth.Flange opening:Located atthe very backofthecabinettofacilitatecablingonthe mounting plate.Degreeofprotection:In accordance with IP66.