ELDON Wall mounted 500x400x210

Wall cabinet 500x400x210 MAS0504021R5 Product description: Material: Cabinet: 1.2 mm painted steel for cabinets with a depth of 155 mm / 1.4 mm for cabinets with a depth of 210 or 260 mm / 1.5 mm for cabinets with a depth of 300 or 400 mm, or if the height or width is greater than or equal to1000mm. Flange:1.4mm painted steel.Door:1.2mm painted steel/1.5mm for cabinets with a height or width of500mmor larger/2m mfor cabinetswithaheightorwidthof800m morabove.Mounting plate:2m mgalvanizedsteel.Cabinet:Folded and fully welded.Four holes8 .5mmdiameterforwallmounting,pressedinto20 .4mmdiameter x2mmmachinedrecessesforaircirculationbehindthecabinetback.Door :130°opening.Hiddenremovablehingeswithsecuredhinge pin.Hinges can be mounted for left- or right-hand opening.From size MAS0604015 and above, there are two removable mounting profiles in the door.Secure seal with one-piece foamed polyurethane gasket.Externally mountedwith130°opening.Hiddenremovable hingeswith securedpin.Hinges can be mountedforleftorright-hand opening.Fromheight300mma ndabove,studsareprovidedtomountMMDPdoorprofiles,andfromheight600and above,internaldoorprofilesareincludedasstandard.One-piecepolyurethanegasket.Lock:Cust omizedlockswithDINlockforeasyopeningofthedoor.DIN3mmcylinderand90°movement.Cabinets1000mmmhighandabovehaveespagnolette three-point locking.Other inserts are supplied as accessories.Mounting plate:The mounting plate is marked vertically at10-mm intervals for easy horizontal positioning of equipment.There are holes at the top and bottom for cable fastening.Fastened to M8 screws spot-welded on the back of the cabinet.All sides from 800 mm and above are reinforced with folded edges.Using AMG accessories, the position of the mounting plate can be adjusted to any depth.Flange opening:Located atthe very backofthecabinettofacilitatecablingonthe mounting plate.Degreeofprotection:In accordance with IP66.