ELDON Wall mounted 600x800x300

Wall cabinet 600x800x300 MAS0608030R5 Product description: Material: Cabinet: 1.2 mm painted steel for cabinets with a depth of 155 mm / 1.4 mm for cabinets with a depth of 210 or 260 mm / 1.5 mm for cabinets with a depth of 300 or 400 mm, or if the height or width is greater than1000mm. Flange:1.4mm painted steel.Door:1.2mm painted steel/1.5mm for cabinets with a height or width of500mmor more/2m mfor cabinetswithaheightorwidthof800mmandabove.Mounting plate:2m mgalvanizedsteel.Cabinet:Folded and fully welded.Four holes8 .5mmdiameterformountingonwall,pressedinto20 .4mmdiameter x2mmmachinedrecessesforaircirculationbehindtherearofthecabinet.Door :130°opening.Hiddenremovablehingeswithsecuredhinge pin.Hinges can be mounted for left- or right-hand opening.From sizeMAS0604015andupwardstherearetworemovablemountingprofiles inthedoor.Securesealingwithone-piecefoamedpolyurethanegasket.Externallymountedwith130°opening.Hiddenremovablehingeswithsecuredpin.Hinges can be mounted for left- or right-hand opening.Fromheight300mma ndabove,socketsareprovidedtomountdoorprofilesMMDP,andfromheight600andover,internaldoorprofilesareincludedasstandard.One-piecepolyurethane gasket.Lock:Cust omizedlockswithDINlockforeasyopeningofthedoor.DIN3mmcylinderand90°movement.Cabinets1000mmmhigh and above have three-point espagnolette locking.Other inserts are supplied as accessories.Mounting plate:The mounting plate is marked vertically with 10 mm intervals for easy horizontal positioning of equipment.There are holes at the top and bottom for cable fastening.Fastened to M8 screws spot welded on the rear wall of the cabinet.All sides from 800 mm and above are reinforced with folded edges.When using AMG accessories, the position of the mounting plate can be adjusted to any depth.Flange opening:Located atthe very backofthecabinettofacilitatecablingonthe mountingplate.Degreeofprotection:In accordancewithIP66.