ADDNORTH - side 3

Lysegrå, 750 g, X-PLA-filament (3D)

Rød, 750 g, PETG-filament (3D)

Fløyelsrød, 750 g, PLA-filament (3D)

Skumringsblå, 750 g, PLA-filament (3D)

Rocky gray, 750 g, PLA-filament (3D)

Galaksesvart, 750 g, PLA-filament (3D)

Matte natural, 750 g, PLA-filament (3D)

Matt kaldhvitt, 750 g, PLA-filament (3D)

Glitz gray, 750 g, E-PLA-filament (3D)

Svart, 1 kg, PLA-filament (3D)

Auroragrønn, 750 g, E-PLA-filament (3D)

Svart, 500 g, nylonfilament (3D)

Hvit, 1000 g, PLA-filament (3D)

EasyFlex is a TPU-based material with 95A Shore hardness. It is easy to use, has good chemical resistance and is very ductile and durable. Print everything from cell phone cases to gaskets to RC car tires — anything that requires softness and flexibility.

add:north's PETG combines the properties from both PLA and ABS.

It is odorless, has low warping and a high impact resistance. PETG also has the highest transparency among all our filaments and is available in a number of different colors.

PETG has grown to be one of the most popular materials for many users. It has in many ways replaced ABS as the primary material for technical applications mainly because of its chemical resistance.

EasyFlex is a TPU-based material with 95A Shore hardness. It is easy to use, have good chemical resistance and is very ductile and durable. Print anything from phone cases to gaskets to RC car tires - whatever requires softness and flexibility.

Svart, 750 g, ABS-filament (3D)

RigidX is a carbon fiber-reinforced PETG filament, which combines the excellent chemical, heat and UV-resistance of regular PETG with the strength and stiffness of carbon fibers. It also adds about 10-20°C in heat resistance, making it the perfect material for a broad range of demanding applications, such as vehicle parts, fixtures or jiggs.

The Rigid X is very easy to use, with a quite broad range of settings you can achieve maximum layer adhesion and a beautiful surface finish, with zero warping.

Svart, 500 g, PETG-filament (3D)

Svart, 2300 g, E-PLA-filament (3D)

PETG Pro Matte is a unique filament that gives your 3D printed parts a professional look. It is easier to print with compared to regular PETG with less stringing and smudges.

PETG Pro Matte provides the best possible surface finish and allows you to print products that need good chemical, UV and thermal properties.

E-PLA is made from biodegradable bioplastic, PLA. It is a filament that we highly recommend for beginners, due to its easy and hassle-free printing experience. E-PLA is also a very popular material for prototyping and covers a wide range of hobbyist needs.

You can print functional parts for indoor use with E-PLA, but be aware of its low wear resistance and do not exceed a working temperature of 60°C.

Lucent Pink and Orange fluoresce under black light and we also offer a green "luminescent" variant (which you need an abrasion resistant nozzle to print with, such as the Brozzl Hardened Steel Nozzle).

Our E-PLA, along with all our other filaments, is manufactured in Sweden and has a diameter tolerance of ±0.025 mm

E-PLA (short for Easy PLA) is made out of the bio-degradeable bio-plastics PLA and it is our most easy-to-use material, with the widest selection of colors. If you are mainly printing visual models in many colors, this is the material for you.

The low process temperature in our production makes the filament low in friction as well as it preserves the fine characteristics of the polymer.

A value-for-money filament without compromising on quality! If nothing else is explicitly stated, all colors are non-transparent.

HT-PLA PRO Matte is a completely unique PLA recipe with greatly enhanced properties compared to regular PLA. Even in comparison with other HT-PLA products on the market, HT-PLA PRO stands out significantly: No post-processing is needed to obtain good thermal properties, as it can handle up to 80C without hardening.

With hardening, which is done at 100 degrees in an oven, it reaches up to 100C in temperature resistance. This product has been developed to maintain the easy-to-print properties of PLA that we all know and love, but at the same time provide greatly improved properties and a very nice, matte surface to the prints.

This material is perfect for products that require a professional appearance and at the same time need to withstand high working temperatures.

Svart, 750 g, PLA-filament (3D)