B.E.G. - side 3

Product: Indoor 180-M-2C (92136)for installation in EURO canned or on substrates. Fjernbetjenbar presence detectors LUXOMAT® Indoor 180-M-2C Master as wall sensor with 180 ° detection. Can be combined with hedging hits in five different colors. In connection with the frame suitable for all common IP switch products. Two channels, one for switching on the lighting, the other potential free to the ignition of HVAC (heating, air conditioning and ventilation). You can connect an unlimited number of slaves for cheap extension of the detection area! Fixtures IP20 and IP54. Measurement of mixed light, day and artificial light (principle of presence sensor) Brightness level and delay time can be adjusted. For mounting heights from 1.10 to 2.20 m with accessory support (92141) can be mounted on the outside of a wall. Application examples: monitoring of public lavatories, corridors, archive rooms, etc. Covers must be ordered separately! Power supply voltage: 230V ~ ± 10%. Detection range: 180 ° Range (around) m: max. 10,00m, Protection: IP20 / Class II / CE, Dimensions: L 87 x W 87 x D 61 mm Ambient temperature: -25 ° C to + 50 ° C , Housing: UV-resistant polycarbonate high-quality. Remote controllable: IR-PD IR-PD-Mini. Channel 1 (light control) 2300 W, power factor measure = 1, 1150 VA, power factor measure = 0.5. Time settings: 15 sec. - 30 min. or pulse Brightness Value: 5-2000 Lux, Channel 2 (HVAC): Max Load: Shutter, NO contact, 3A, 230V, power factor measure = 1 Time settings: Alarm pulse, impulse or 5 - 120min. Power consumption:> 0.5W.

Product: IR-PD-1C (92520) Infrared remote control LUXOMAT® IR-PD-1C suitable for motion detectors LUXOMAT® PD1-M-, PD2-M-, PD4-M-, PD4-M-, PD5-M- and PD9-M. Through various programs can motion sensor to be tailored to individual requirements, even after installation. Additional features such as. autoloading in the current daylight value or the useful 2 sec.-test function can be performed with IR PD-1C. The light can be switched on or off by pressing a key. A further installation of a switch is thus not necessary. Battery Lithium CR2032 - 3 Volt (included) Range (around) m: depending on lysforholdene- cloudy or dark: 5 to 6 m direct sunshine: 2 to 3m. Dimensions: L 80 x W 60 x H 8 mm

Product: PD2-S-i (92166) Presence detector LUXOMAT® PD2-S, Slave with 360 degree field of detection for recessed ceiling. Large energy savings potential. It requires only a Master of ignition of light and ventilation. Possibility of detection of movement in all local segments with slaves. The pulse signal to the Master of detected movement. Movement Detection independent of ambient brightness No setting items on the Slave sensor and præstationsdel in a cabinet Application examples: meeting rooms, class rooms, single offices, garages Mains: 230 V ~ ± 10% Detection range: 360 ° Range (around) m: - sitting Ø 4 00 m - across Ø 10.00 m - head Ø 6.00 m Protection: IP20 / Class II / CE Dimensions: Ø 80 x H 84.5 mm Ambient temperature: -25 ° C to + 50 ° C Cabinet: of UV-resistant polycarbonate high quality Pulse function: Pulse spacing 2 sec. or 9 sec. Slave output Slave device: 230 V Power consumption:> 0.5W