Blackmagic - side 5

- Audio Inputs for ATEM Television Studio
- Connects to Switcher via MADI
- 4 XLR-1/4" Combo Mic/Line Inputs, +48V
- 32-Bit Float Digital Preamps
- 8 ADCs/Channel, 24-Bit / 48 kHz Audio
- Easy-to-Use, No Setup Required
- 64-Channel MADI Digital Audio I/O Ports
- HDMI Monitor Out
- USB-C and Ethernet Ports
- Works with ATEM Software Control App

- 8-Input 12G-SDI UHD 4K60 Live Switcher
- Redesigned Buttons and Layout
- Streaming Support, USB & M.2 Recording
- Blackmagic Cloud Integration
- Webcam Support, Runs Blackmagic OS
- 12G-SDI & HDMI Multiview Outputs
- Audio Mixing, Transitions, T-Bar, AUX
- Customizable Electronic LCDs
- Studio Camera Control
- Timecode, MADI, Talkback

- 8-Channel 3G-SDI Live Streaming Switcher
- Supports up to 1080p60
- RTMP Streaming via Ethernet or USB-C
- Record Program Out and Individual Inputs
- 11-Input, 2-Channel Audio Mixer

Blackmagic Design's SmartView Duo comprises a pair of side-by-side 8" LCD monitors – both with an auto-selecting 3G/HD/SD-SDI input – that are housed in a 3 RU-high, rackmountable form factor. Ideal for live broadcast and mobile video production, the slim SmartView Duo features integrated tally (input via a standard 9-pin D connector) that clearly shows video status by displaying a red, green, or blue ring that borders the screen in question.

The 800 x 480-resolution displays' auto-switching SDI inputs accept an extremely wide range of digital signals, from standard-def 525i and 625i to full progressive high-definition 1080p60 and several flavors of 2K-resolution video. There's a loop-out BNC for both inputs, with re-clocking of the signal. For screen configuration and settings, plus firmware updates, the SmartView Duo has both USB 2.0 and Ethernet inputs.

For the SmartView Duo, a sleek design pays practical dividends. The thinness of the dual-display panel (less than 1") means it's easier to install, transport, and ship. The lack of mechanical controls on the panel itself takes inadvertent adjustments out of the equation. The auto-image-flip feature means that the displays can be rotated upside down so you can achieve the best viewing angle.

The Blackmagic Design MultiView 4 features four 10-bit 6G-SDI inputs that let you monitor SD, HD, or 4K sources in any combination on Ultra HD monitors or TVs. This lets you take advantage of high resolution displays to view each source with increased clarity. The MultiView 4 allows for 2x2 display with each input fully re-synchronized. One 6G-SDI output and one HDMI multi-view output are provided, as well as a loop output for each 6G-SDI input for passing the signals to additional devices.

Housed in a 1 RU machined aluminum frame, the MultiView 4 is ready for use in the studio, broadcast truck, or even on location. It can be controlled with the included control software via the Ethernet port or by an optional Teranex front panel (not included). For easy integration into any facility, a built-in multi-voltage power supply supports 90 to 240 VAC, or you can power the unit by 48 VDC PoE+.

Note: IEC power cable is not included.

SmartScope Duo 4K Rack-Mounted Dual 6G-SDI Monitors
The Blackmagic Design SmartScope Duo 4K Rack-Mounted Dual 6G-SDI Monitors is a monitoring solution for studio and location productions, displaying video with resolutions up to 3840 x 2160 at 30p. It features two 8" monitors each with a loop-through SDI input and output. The inputs are auto-sensing/selecting so you don't have to worry about matching the input format; the monitor will display any supported format that you feed it. You can choose to select to display either the input video or one of six scope displays, while the input video passes through the monitor to downstreamed devices.

You use the USB connector to initialize the monitor on your network; after that you can control the monitors using the supplied software via the Ethernet connector. This allows you to adjust the monitors' brightness and color as well as select the monitors display mode - video or scope view. The SmartScope Duo 4K also incorporates a Tally display around the border of the image, which works with industry standard Tally systems. The unit takes up three rack height units, but is less than two inches deep (including the connector depth), which makes it well suited for use in production trucks where space is at a premium. The unit also automatically flips the image if you need to install the unit upside down.

Note: SmartScope Duo v1 and v2 are functionally identical, with v2 containing a slightly different internal component set.

Dual slot SD card broadcast deck

HDMI, 3G-SDI/HD-SDI/SDI videokrysskonverter / skalerer

Videoruter

Fra 3G-SDI/HD-SDI/SDI til HDMI-video- og lydkonverter

Production and streaming studio

12G-SDI til HDMI video- og lydomformer

Kamerasøker, for URSA Mini Pro 4.6K G2

• Standard SFP Cage
• LC Fiber Connections
• Supports SD, HD, and 4K Resolutions

Add an LC fiber optic connection to your Blackmagic Studio Camera, Teranex Converter, ATEM hardware, or any other professional device that supports SFP cages with this Blackmagic Design 6G SFP Optical Module. 6G data rates support SD, HD, and 4K resolutions, and the fiber optic communication allows for long-distance transmission without quality loss.

Form Factor SFP cage
Fiber Connector Duplex LC Connectors
Compatible with Singlemode Fiber

The Blackmagic Design DeckLink 4K Extreme 12G is an 8-lane PCIe Gen2 digital cinema capture and playback card with two multi-rate 12G-SDI inputs and outputs that accept resolutions from SD up to DCI 4K (4096x2160) at 60 fps. The card supports 10-bit YUV and 8-, 10-, and 12-bit RGB color, as well as up/down/cross conversions and 3D stereoscopic output at full bandwidth 4:4:4:4 RGB. The DeckLink 4K Extreme 12G features a mezzanine card design that has 4K HDMI input and output connectors on a second daughter card, along with connections for adding two optional optical fiber modules for Dual Link optical fiber SDI input and output. The card also supports AES/EBU balanced XLR and unbalanced RCA inputs/outputs, analog video I/O, reference input, and RS-422 control via an included breakout cable.

The Power Supply for Pocket Cinema Camera from Blackmagic Design is used both to power the camera from AC as well as recharge a battery in the camera. It outputs 12V DC, and features a 0.7 mm DC jack connector specifically to fit the Pocket Cinema Camera. It takes approximately an hour and fifteen minutes to recharge a battery while the camera is off and approximately two hours when the camera is in use.

AC Input Power 100 to 240 VAC, 50 / 60 Hz
Output Voltage 12 VDC (Proprietary)

The Teranex Mini Smart Panel, from Blackmagic Design, is designed to simply replace the existing front panel on any Teranex Mini Converter and instead provide a color LCD, spin dial, and six control buttons, including a menu control. You'll be able to adjust settings, browse menus, monitor conversions in progress, monitor audio levels, verify timecode, and verify the video standard being converted. The Smart Panel easily attaches in place of the standard front panel once the standard panel is taken off.

Blackmagic Focus and Zoom demands allow you to adjust the focus and zoom of compatible photographic lenses without the need to reach around the camera. They attach to the tripod handles via the included mounting hardware so you can focus on framing the right shot without taking your hands off the tripod.

The focus demand works with active MFT or EF lenses while the zoom demand is compatible with power zoom MFT or EF lenses. Plus the zoom demand has additional customizable buttons that let you fine tune the zoom speed, engage talkback or even set ND filters on the 6K Pro. Blackmagic Focus and Zoom demands make still photography lenses feel like expensive broadcast lenses without the cost!

Connect your UltraStudio 4K Extreme to your computer via PCIe using the PCIe Cable Kit from Blackmagic Design. The kit includes a high-speed Gen 3 PCI express plug-in card and cable, and delivers higher data transfer speeds than Thunderbolt. The PCIe adapter card needs to be installed in your computer's PCIe slot and the cable connects your UltraStudio 4K Extreme's PCIe port to the PCIe port at the back of your computer.

Compatibility: UltraStudio 4K Extreme and UltraStudio 4K Extreme 3

Live stream from any 12G‑SDI video source direct to YouTube, Facebook, Twitter and more!

Now you can live stream to the world! Blackmagic Web Presenter is a complete streaming solution that includes a professional hardware streaming engine for direct streaming via Ethernet to YouTube, Facebook, Twitter and more! It’s just like a modern broadcast television transmitter for a new global streaming audience! Plus the built in USB connections work like a webcam, so you can connect a computer and use any streaming software, or even Skype or Zoom. For redundancy, you can stream to the internet via Ethernet or connect a 5G or 4G phone to use mobile data! Web Presenter also includes a technical monitoring output that includes video, audio meters, trend graphs and even SDI technical data!

The Blackmagic Design HDMI to SDI 6G Mini Converter converts HDMI to SD, HD, 3G, or 6G-SDI in resolutions up to DCI 4K (4096 x 2160) at 24p and UHD 4K (3840 x 2160) up to 30p. This is useful for connecting consumer devices that output HDMI signals with professional SDI video equipment. With a compact form factor and easy-to-use controls, the Mini Converter is ideal for a variety of broadcast, post-production, and professional AV applications.

Using 4K HDMI and 6G-SDI technologies, the Mini Converter automatically detects the input video format and instantly changes between SD, HD, and UHD/DCI 4K formats. The two 6G-SDI outputs also support SD and HD-SDI signals for integration into existing workflows. Both 6G-SDI outputs send duplicate signals. Audio is embedded in the SDI output from either the HDMI input or from the two 1/4" input jacks which support four channels of AES/EBU digital audio or two channels of analog audio.

• The Mini Converter's settings are controlled using the built-in switches or via USB using the control software for Max OS X or Windows computers, which can be downloaded on Blackmagic Design's website. The USB port also enables the firmware to be updated.
• The device is powered by an included 12V power supply and includes international socket adapters.

Ingest and play back high-resolution video and audio for digital signage, real-time capture, or media player applications with the DeckLink Duo 2 Mini Capture and Playback Card from Blackmagic Design. The Duo 2 Mini is a low-profile PCIe card that features four bidirectional mini BNC SDI inputs/outputs. These multi-rate connections accept 3G/HD/SD--SDI input and output signals, providing support for resolutions from SD to HD 1080p60. Additionally, the DeckLink Duo 2 Mini includes a reference input and supports 16 channels of 48 kHz 24-bit audio.

The DeckLink Duo 2 Mini offers flexible format and system support, letting you work with popular compressed video formats such as ProRes, AVCHD, XDCAM, and DNxHD, as well as up to 12-bit uncompressed video. When working with uncompressed video, all images are pixel-for-pixel identical to the source, without any generational loss. This lets you get sharper keying with green screens, cleaner compositions, superior color correction, and more. Support for common file formats provides ready-to-edit files for use in popular editing, effects, and design software applications. The DeckLink Duo 2 Mini is compatible with macOS, Windows, and Linux-based workstations. Drivers and utility software are included on an SD card for the supported platforms.

The Blackmagic Design PSUPPLY-INT12V10W is a replacement power supply that can be used with any Mini Converter in the series as well as the HyperDeck Shuttle. As with the original unit, this power supply includes socket adapters for international countries and also features a cable tie to prevent the wire from becoming accidentally disconnected.

The URSA Power Supply from Blackmagic Design is a power supply brick with an attached XLR cable. The brick has an open slot for an IEC cable (sold separately).