Wera Bormaskin & Bits - side 3

High quality bits for recessed TORX® screws. The Impaktor technology offers an above-average service life even under extreme circumstances. Enhanced friction resistance, thanks to the rough diamond-particle coating on the bit tip, prevents any slipping out of the screw head. Particularly suitable for use with customary impact drivers. ¼” hexagon, suitable for holders as per DIN ISO 1173-F 6.3.

High quality bits for Phillips screws in a practical Bit-Box. 1/4" hex, suitable for holders as per DIN ISO 1173-D 6.3.

Bitnøkkelsett, sekskantnøkkel, med holdfunksjon for spesielt praktisk skruing med redusert risiko for å miste skruen når du jobber på arbeidsstykket.

Valve Holder, 32x70 mm

Spissett for skrutrekker, 12 deler, torx, phillips, pozidriv, heksagonal, lengde: 25 mm

43-piece; robust textile box with bits for universal applications. 1 universal holder 899/4/1 with stainless sleeve, retaining ring and strong permanent magnet for insertion in the power screwdriver or for use in the chuck of the electric drill.

Tough-absorbing bits for universal use. BiTorsion bits with an elastic torsion zone – where kinetic energy is diverted from peak loads – and softer BiTorsion zone to prevent the bit tip from twisting under high strain. This greatly extends the product service life. Offer the best possible service life with the appropriate holder. Comes with Rapidaptor technology, which allows bits to be attached without any need to actuate the sleeve. The removal of the bit is simple, just by pushing the sleeve forward – for rapid bit change with just one hand. For the take-up of bits with 1/4" hexagon head drive as per DIN ISO 1173-C 6.3 und E 6.3. For insertion in the power screwdriver or into the chuck of the power drill. The multi-component Bit-Check is convincing on account of its low weight and the maximum possible degree of compactness. In this respect, the soft material in the lower section of the Bit-Check ensures that the bits are securely held whilst being simple to remove at the same time. The profile and size of the bits are easy to recognise thanks to the Wera "Take it easy" Tool Finder with its colour coding and clearly visible imprint.

Bit-Check for drywall construction. High quality spacer out of aluminium; the screwdriving depth can be infinitely adjusted and allows the flush-mounting of screws; 9 drywall bits with modified output shaft, 25 mm in length.

Robust Bit-Check fra Wera. Bit-Checks gir en rask oversikt over tilgjengelige verktøy. Bits som ikke trengs settes enkelt tilbake i settet og går ikke tapt. Enkel transport, for eksempel i skjortelommen. Inkluderer universell holder med sterk permanent magnet for å ta opp bits med ¼" sekskantet hodedrift. Kan settes inn i kraftskrutrekkeren eller brukes i chucken på elektrisk drill. Multi-komponent Bit-Check som kan plasseres oppreist for permanent sikker lagring av bitsene.

6 Wera-biter på 50 mm pent ordnet i et minimum av plass i en praktisk Bit-Check. De tøffe viskøse bitene er egnet for universell bruk. I tilfelle Torsion-bitene (TZ), absorberes dreiemomentstopper også i Torsion-sonen. Dette forhindrer tidlig slitasje og forbedrer levetiden.