D-LINE - side 2

Half circle 22 x 22mm profile covers expansion gaps between floors and skirting, while providing an easy-to-use cable duct around floor perimeters. The 22 x 22mm (W x H) dimensions scale well to blend with popular skirting boards, while providing capacity for cable bending radii around corners.

Traditional floor trim is usually nailed, and requires perfect measuring of lengths before corners can be mitre-cut at 45º angles. By contrast D-Line half circle can simply peel-and-stick to skirting, while the Clip-Over corner-bends save any need for precise measuring and can cover oblique cuts.

Compared to regular floor trim, D-Line features combine to enable approximately 50% quicker installations – and then it’s easy to add or remove cables!

The Kit consist of:
3x22x22mm Cable duct
1x Internal Bend Join lengths around 90 degree inside corners
1x External Bend Join lengths around 90 degree outside corners
2x Coupler Join 2 lengths of same profile on flat surface
2x Cable outlets
2x End Cap Neatly finish open ends

Angled joint connectors for D-Line semi-circular cable ducts, set of four parts.

1x Flat Bend Clip Over - Change direction by 90º on flat surfaces
2x Internal Bend Clip Over - Join lengths around 90º inside corners
2x External Bend Clip Over - Join lengths around 90º outside corners
1x Equal Tee Clip Over - Use to join 3 lengths of same profile.
2x Coupler Smooth Fit - Join 2 lengths of same profile on flat surface.
2x End Cap Smooth Fit - Neatly finish open ends.

Couplings for D-Line cable ducts in semi-circular design, with a fine White Finish

1x Flat Bend: Change direction by 90 degrees on flat surfaces
2x Internal Bend: Join lengths around 90 degree inside corners
2x External Bend: Join lengths around 90 degree outside corners
2x Cable In/Outlet: Takes cables in or out of a trunking. Use between lengths on straight runs.
1x Coupler: Join 2 lengths of same profile on flat surface
2x End Cap: Neatly finish open ends

Couplings for D-Line cable shells in semi-circular design in a nice black finish.

8 pcs D-Line connections for cable ducts in oak colour. Lets you hide your cables in an elegant way. Custom size 22 x 22 mm.

Cable Tidy Clips have a low-profile design, being only 15mm width x 8mm depth – giving a smart appearance which can be ideal for tight spaces (and door frames for example).

The self-adhesive cable clips are produced in UK, using a flexible PVC that makes it easy to add or remove cables.

Users can simply pull back the top cover to insert cables up to 7mm outer diameter, then release the cover to hold the cables.

Angled joint connectors for D-Line semi-circular cable ducts, set of four parts

- Tested to hold up to 10kg with a 50mm overlap
- Velcro design
- Scissor cut as required; Re-usable
- Versatile 1.2m length

While commonly used as a reusable cable tie to secure cables to supports, this versatile Velcro Band is ideal for multi-purpose applications.

Fully safety-tested, Cable Tidy Band can hold up to 10kg when fastened with 50mm overlap.

Angled joint connectors for D-Line semi-circular cable ducts, set of four parts.

Angled joint connectors for D-Line semi-circular cable ducts, set of four parts.

Splitter connector for D-Line cable collector quartz circle shaped, seen in four parts.

1x Flat Bend: Change direction by 90 degrees on flat surfaces
2x Internal Bend: Join lengths around 90 degree inside corners
2x External Bend: Join lengths around 90 degree outside corners
2x Cable In/Outlet: Takes cables in or out of a trunking. Use between lengths on straight runs.
1x Coupler: Join 2 lengths of same profile on flat surface
2x End Cap: Neatly finish open ends

Fits 30 x 15 mm cable duct

Couplings for D-Line cable ducts in quartz circle design in a nice white finish.

Cable Tidy Wrap
Users simply wrap the Spiral around cables to give effective protection to cables. This versatile solution allows cables to enter or exit along the length, so making a popular option for us in tight spaces. Expands around bundles of cables up to 40mm diameter. Length 2m.

Cable Tidy Clips
Cable Tidy Clips have a low-profile design, being only 15mm width x 8mm depth – giving a smart appearance which can be ideal for tight spaces (and door frames for example). Self-adhesive PVC clips. Users can simply pull back the top cover to insert cables up to 7mm outer diameter, then release the cover to hold the cables. 20 pieces in polythene bag. Dimensions- (W) 27mm x (H) 15mm x(D) 8mm.

Cable Tidy Band
While commonly used as a reusable cable tie to secure cables to supports, this versatile hook & loop Band is.ideal for multi-purpose applications. Tested to hold up to 10kg with a 50mm overlap. Being 1.2m long enables users to cut strips to required lengths.

Cable Tidy Bases
Use Cable Tidy Bases to keep cables handy and in-reach, saving any need to pick-up fallen cables! Simply peel and stick to adhere Bases to smooth surfaces.They can hold in place cable(s), or other essentials up to 8mm diameter. Multi-purpose - use with cables, headphones, pens & pencils etc. Dimensions - 27mm diameter, 14mm high.

The D-Line 30 x 15mm Mini cable managment solution offers a subtle appearance to make surface cable installations look attractive! The ½-round shape can blend to resemble the natural top-section of skirting boards, while offering a modern solution for vertical cable drops and runs across ceilings.

Unique stylish ‘D-Line’ appearance
Saves channelling walls
Patented hinge &, click-lock lid
Self-adhesive
Paintable
7 adaptors included to enable popular connections
(3 x 30x15mm x 1m Trunking White)
- 1 x Clip-Over Internal Bend
- 1 x Clip-Over External Bend
- 1 x Clip-Over Flat Bend
- 2 x Smooth Fit Couplers
- 2 x Smooth Fit End Caps
Can be shortened arbitrarily
A smart alternative to traditional offers
No sharp edges, gentle on impact
Fully safety tested and certified to BS EN 50085-1:2005
Color: white