Osram Drivere, spoler og transformatorer

Product features • Line frequency: 50...60 Hz • RI suppression: to EN 55015 (A1: 2007)/CISPR 15, EN 55022 • Line harmonics: to EN 61000-3-2 • Immunity: to EN 61547 • Safety: to EN 61347 • Electrical isolation between the primary side and the secondary side • Short-circuit protection, overload protection, overtemperature protection: electronically reversible • Switching between electronic transformer and lamp not permitted Product benefits • Dimmable on the leading edge and trailing edge • Very low power loss thanks to high efficiency • Strain relief suitable for different cable types (HTM) • Suitable for space-critical installation thanks to compact functional design • Extremely compact transformer for highly space-critical installation conditions (HTN) • Protective operation throughout the entire partial-load range for long lamp life Areas of application • Effect and accent lighting • Living rooms • Object lighting • Conference rooms • Restaurants • Recessed and surface-mounted furniture fixtures • Shop lighting • Event rooms

Product features • Supply voltage: 230...240 V • Line frequency: 0 Hz | 50 Hz | 60 Hz • Line voltage: 198...254 V • Battery voltage may drop to 176 V, ignition must take place above 198 V • Lamp start: within 1.0 s with optimum filament preheating • Energy Efficiency Index EEI: A2 • Safety: to EN 61347-2-3 • Lamp operation: to EN 60929 • RI suppression: to EN 55015:2006+A1:2007/CISPR 15 • Line harmonics: to EN 61000-3-2 • Immunity: to EN 61547 Product benefits • Same luminous flux with direct and alternating current • Automatic safety shutdown of lamps in the event of a defect or at end of life (EoL T.2) • Automatic restart after lamp replacement • Perfect lamp start for applications with motion sensors Areas of application • Suitable for use in emergency lighting systems as per EN 50172/DIN VDE 0108-100

Produktegenskaper • Forsyningsspenning: 220...240 V • Linjespenning: 198...254 V • Linjefrekvens: 50 Hz • Automatisk avstenging av defekte lamper og ved slutten av levetiden (EoL) • Sikkerhet: til EN 61347-2-3 • RI-undertrykkelse: til EN55015:2006+A1:2007+A2 :2009/CISPR15 • Linjeharmoniske svingninger : til EN61000-3-2 • Immunitet : til EN61547 Produktfordeler Automatisk omstart etter lampeskift

Product features • Supply voltage: 220...240 V • Line voltage: 198...264 V • Line frequency: 0 Hz, 50 Hz...60 Hz • Lamp start with optimum filament preheating • Life time: >100,000 h (for T = 65°C at Tc) • Automatic shutdown of defective lamps and at end of life (EoL) • Safety: to EN 61347-2-3 • Lamp operation: to EN 60929 • RI suppression: to EN 55015:2006+A1:2007+A2:2009/CISPR 15 • Line harmonics: to EN 61000-3-2 • Immunity: to EN 61547 Product benefits • Perfect lamp start for applications with motion sensors • Automatic restart after lamp replacement

Product features • Energy Efficiency Index EEI: A2 • Supply voltage: 220...240 V • Line frequency: 50...60 Hz • RI suppression: to EN 55015/CISPR 15 • Safety: to EN 61347-2-12 • Line harmonics: to EN 61000-3-2 • Immunity: to EN 61547 Product benefits • Extended terminal section enables mains looping • Screw-down cable clamps for reliable strain relief • Long reliable life at maximum permitted temperatures • Automatic safety shutdown of lamps in the event of a defect or at end of life (EoL) Areas of application • Shop lighting • Health and fitness areas • Effect and accent lighting Equipment / Accessories • Precabled versions available on request

Produktfordeler: Lang lampelevetidIngen negative effekter av hyppig på/av-brytingAutomatisk omstart etter lampeskiftePerfekt lampestart for applikasjoner med bevegelsessensorerVDE/VDE EMC-sertifisert systemSvært høy energieffektivitet på grunn av kutt-teknologiBruksområder: Åpne kontorlandskap, korridorer og lagringsromOffentlige bygningerStripelysEgnet for nødbelysning (DC-drift)Egnet for armaturer i beskyttelsesklasse I

Product features • Supply voltage: 220...240 V • Line voltage: 198...264 V • Line frequency: 0 Hz, 50 Hz...60 Hz • Lamp start with optimum filament preheating • Life time: >100,000 h (for T = 65°C at Tc) • Automatic shutdown of defective lamps and at end of life (EoL) • Safety: to EN 61347-2-3 • Lamp operation: to EN 60929 • RI suppression: to EN 55015:2006+A1:2007+A2:2009/CISPR 15 • Line harmonics: to EN 61000-3-2 • Immunity: to EN 61547 Product benefits • Perfect lamp start for applications with motion sensors • Automatic restart after lamp replacement

Product features • Line frequency: 50...60 Hz • RI suppression: to EN 55015 (A1: 2007)/CISPR 15, EN 55022 • Line harmonics: to EN 61000-3-2 • Immunity: to EN 61547 • Safety: to EN 61347 • Electrical isolation between the primary side and the secondary side • Short-circuit protection, overload protection, overtemperature protection: electronically reversible • Switching between electronic transformer and lamp not permitted Product benefits • Dimmable on the leading edge and trailing edge • Very low power loss thanks to high efficiency • Strain relief suitable for different cable types (HTM) • Suitable for space-critical installation thanks to compact functional design • Extremely compact transformer for highly space-critical installation conditions (HTN) • Protective operation throughout the entire partial-load range for long lamp life Areas of application • Effect and accent lighting • Living rooms • Object lighting • Conference rooms • Restaurants • Recessed and surface-mounted furniture fixtures • Shop lighting • Event rooms

Product features • Line frequency: 50...60 Hz • RI suppression: to EN 55015 (A1: 2007)/CISPR 15, EN 55022 • Line harmonics: to EN 61000-3-2 • Immunity: to EN 61547 • Safety: to EN 61347 • Electrical isolation between the primary side and the secondary side • Short-circuit protection, overload protection, overtemperature protection: electronically reversible • Switching between electronic transformer and lamp not permitted Product benefits • Dimmable on the leading edge and trailing edge • Very low power loss thanks to high efficiency • Strain relief suitable for different cable types (HTM) • Suitable for space-critical installation thanks to compact functional design • Extremely compact transformer for highly space-critical installation conditions (HTN) • Protective operation throughout the entire partial-load range for long lamp life Areas of application • Effect and accent lighting • Living rooms • Object lighting • Conference rooms • Restaurants • Recessed and surface-mounted furniture fixtures • Shop lighting • Event rooms

Product features • Energy Efficiency Index EEI: A2 • Supply voltage: 220...240 V • Line frequency: 50...60 Hz • RI suppression: to EN 55015/CISPR 15 • Safety: to EN 61347-2-12 • Line harmonics: to EN 61000-3-2 • Immunity: to EN 61547 Product benefits • Extended terminal section enables mains looping • Screw-down cable clamps for reliable strain relief • Long reliable life at maximum permitted temperatures • Automatic safety shutdown of lamps in the event of a defect or at end of life (EoL) Areas of application • Shop lighting • Health and fitness areas • Effect and accent lighting Equipment / Accessories • Precabled versions available on request

Product features • Line frequency: 50...60 Hz • RI suppression: to EN 55015 (A1: 2007)/CISPR 15, EN 55022 • Line harmonics: to EN 61000-3-2 • Immunity: to EN 61547 • Safety: to EN 61347 • Electrical isolation between the primary side and the secondary side • Short-circuit protection, overload protection, overtemperature protection: electronically reversible • Switching between electronic transformer and lamp not permitted Product benefits • Dimmable on the leading edge and trailing edge • Very low power loss thanks to high efficiency • Strain relief suitable for different cable types (HTM) • Suitable for space-critical installation thanks to compact functional design • Extremely compact transformer for highly space-critical installation conditions (HTN) • Protective operation throughout the entire partial-load range for long lamp life Areas of application • Effect and accent lighting • Living rooms • Object lighting • Conference rooms • Restaurants • Recessed and surface-mounted furniture fixtures • Shop lighting • Event rooms

Product features • Line frequency: 50...60 Hz • RI suppression: to EN 55015 (A1: 2007)/CISPR 15, EN 55022 • Line harmonics: to EN 61000-3-2 • Immunity: to EN 61547 • Safety: to EN 61347 • Electrical isolation between the primary side and the secondary side • Short-circuit protection, overload protection, overtemperature protection: electronically reversible • Switching between electronic transformer and lamp not permitted Product benefits • Dimmable on the leading edge and trailing edge • Very low power loss thanks to high efficiency • Through-wiring possible on the primary side • Large temperature range • Protective operation throughout the entire partial-load range for long lamp life Areas of application • Suitable for emergency installations • Effect and accent lighting • Living rooms • Object lighting • Conference rooms • Restaurants • Recessed and surface-mounted furniture fixtures • Shop lighting

ECG for FL and CFL - not dimmable. Product benefits: • Long lamp life • No adverse effect from frequent on/off switching • Automatic restart after lamp replacement • Perfect lamp start for applications with motion sensors • VDE/VDE EMC certified system • Very high energy efficiency due to cut-off technology • Areas of application: • Emergency lighting systems acc. to EN 50172 / DIN VDE 0108-100, industry, open-plan offices, corridors and storage rooms, public buildings, sports halls and factories, strip lighting • Suitable for emergency lighting (DC operation) • Modernization of existing systems. Product features: • Supply voltage: 220...240 V • Line voltage: 198...264 V • Line frequency: 0 Hz, 50 Hz...60 Hz • Lamp start with optimum filament preheating • Lifetime: up to 100,000 h (temperature at Tc = 65 °C, max. 10 % failure rate) • Energy Efficiency Index EEI: A2 BAT • Automatic shutdown of defective lamps and at end of life (EoL T.2) • Safety: to EN 61347-2-3 • Lamp operation: to EN 60929

Produktfordeler: Lang lampelevetidIngen negative effekter av hyppig på/av-brytingAutomatisk omstart etter lampeskiftePerfekt lampestart for applikasjoner med bevegelsessensorerVDE/VDE EMC-sertifisert systemSvært høy energieffektivitet på grunn av kutt-teknologiBruksområder: Åpne kontorlandskap, korridorer og lagringsromOffentlige bygningerStripelysEgnet for nødbelysning (DC-drift)Egnet for armaturer i beskyttelsesklasse I

Produktegenskaper • Forsyningsspenning: 220...240 V • Linjespenning: 198...264 V • Linjefrekvens: 50...60 Hz • Lampestart med optimal filamentoppvarming • Automatisk avstenging av defekte lamper og ved slutten av levetiden (EoL T.2) • Sikkerhet: til EN 61347-2-3 • RI-undertrykkelse: til EN 55015:2006+A1:2007+A2 :2009/CISPR15 • Linjeharmonikk : til EN61000-3-2 Produktfordeler Automatisk omstart etter lampeskift

Product features • Control via 1...10 V interface • Supply voltage: 220...240 V • Line frequency: 0 Hz | 50 Hz | 60 Hz • Line voltage: 198...264 V • Dimming range: 1...100 % luminous flux • Lamp start: within 0.6 s • Life time: >100,000 h (for T = 65°C at Tc) • Automatic shutdown of defective lamps and at end of life (EoL T.2) • Suitable for luminaires of protection class I • Energy Efficiency Index EEI: A1 BAT • Overtemperature protection: Thermal management at high Tc temperatures • Safety: to EN 61347-2-3 Product benefits • Same luminous flux with direct and alternating current • Perfect lamp start for applications with motion sensors • Dimming of amalgam lamps without flickering or reduced lifespan • Very high efficiency thanks to cut-off technology • Automatic restart after lamp replacement • ECGs comply with MINERGIE standard due to very low standby consumption • Configurable emergency power characteristics Areas of application • Emergency lighting systems acc. to EN 50172 / DIN VDE 0108-100

Product features • Supply voltage: 220...240 V • Line voltage: 198...264 V • Line frequency: 0 Hz, 50 Hz...60 Hz • Lamp start with optimum filament preheating • Life time: >100,000 h (for T = 65°C at Tc) • Energy Efficiency Index EEI: A2 BAT • Automatic shutdown of defective lamps and at end of life (EoL) • Safety: to EN 61347-2-3 • Lamp operation: to EN 60929 • RI suppression: to EN 55015:2006+A1:2007+A2:2009/CISPR 15 • Line harmonics: to EN 61000-3-2 • Immunity: to EN 61547 Product benefits • Perfect lamp start for applications with motion sensors • Automatic restart after lamp replacement

Product features • Energy Efficiency Index EEI: A2 • Supply voltage: 220...240 V • Line frequency: 50...60 Hz • RI suppression: to EN 55015/CISPR 15 • Safety: to EN 61347-2-12 • Line harmonics: to EN 61000-3-2 • Immunity: to EN 61547 Product benefits • Long reliable life at maximum permitted temperatures • Compact dimensions and low weight for small luminaire designs • Excellent thermal behavior for very high limit temperatures tc and ta • Automatic safety shutdown of lamps in the event of a defect or at end of life (EoL) Areas of application • Shop lighting • Health and fitness areas • Effect and accent lighting Thermal characteristics Ballast losses and lamp heat radiation can lead to heat accumulation in a completely closed case. Therefore it is necessary to ensure that the temperature at the measuring point tc of the ECG does not exceed the maximum value. Attention! For safety reasons disconnect the device before replacing the lamp! Any conductive material must have a minimum distance of 4 mm to the front of the terminal block. Installation by qualified electrician only. Terminals for protective earth not suitable for any through connection.

Product features • Control via 1...10 V interface • Supply voltage: 220...240 V • Line frequency: 0 Hz | 50 Hz | 60 Hz • Line voltage: 198...264 V • Dimming range: 1...100 % luminous flux • Lamp start: within 0.6 s • Life time: >100,000 h (for T = 65°C at Tc) • Automatic shutdown of defective lamps and at end of life (EoL T.2) • Suitable for luminaires of protection class I • Energy Efficiency Index EEI: A1 BAT • Overtemperature protection: Thermal management at high Tc temperatures • Safety: to EN 61347-2-3 Product benefits • Same luminous flux with direct and alternating current • Perfect lamp start for applications with motion sensors • Dimming of amalgam lamps without flickering or reduced lifespan • Very high efficiency thanks to cut-off technology • Automatic restart after lamp replacement • ECGs comply with MINERGIE standard due to very low standby consumption • Configurable emergency power characteristics Areas of application • Suitable for use in emergency lighting systems as per EN 50172/DIN VDE 0108-100

Product features • Energy Efficiency Index EEI: A2 • Supply voltage: 220...240 V • Line frequency: 50...60 Hz • RI suppression: to EN 55015/CISPR 15 • Safety: to EN 61347-2-12 • Line harmonics: to EN 61000-3-2 • Immunity: to EN 61547 Product benefits • Long reliable life at maximum permitted temperatures • Compact dimensions and low weight for small luminaire designs • Excellent thermal behavior for very high limit temperatures tc and ta • Automatic safety shutdown of lamps in the event of a defect or at end of life (EoL) Areas of application • Shop lighting • Health and fitness areas • Effect and accent lighting Thermal characteristics Ballast losses and lamp heat radiation can lead to heat accumulation in a completely closed case. Therefore it is necessary to ensure that the temperature at the measuring point tc of the ECG does not exceed the maximum value. Attention! For safety reasons disconnect the device before replacing the lamp! Any conductive material must have a minimum distance of 4 mm to the front of the terminal block. Installation by qualified electrician only. Terminals for protective earth not suitable for any through connection.

Product features • Supply voltage: 220...240 V • Line voltage: 198...264 V • Line frequency: 0 Hz, 50 Hz...60 Hz • Lamp start with optimum filament preheating • Automatic shutdown of defective lamps and at end of life (EoL) • Safety: to EN 61347-2-3 • Lamp operation: to EN 60929 • RI suppression: to EN 55015:2006+A1:2007+A2:2009/CISPR 15 • Line harmonics: to EN 61000-3-2 • Immunity: to EN 61547 Product benefits • Perfect lamp start for applications with motion sensors • Automatic restart after lamp replacement Areas of application • Suitable for use in emergency lighting systems as per EN 50172/DIN VDE 0108-100

ECG for FL and CFL - not dimmable. Product benefits: •Long lamp life •No adverse effect from frequent on/off switching • Automatic restart after lamp replacement • Perfect lamp start for applications with motion sensorsVDE/VDE EMC certified system •Very high energy efficiency due to cut-off technology. Areas of application: Open-plan offices, corridors and storage rooms, public buildings, strip lighting •Suitable for emergency lighting (DC operation) • Suitable for luminaires of protection class I • Modernization of existing systems. Product features:• Supply voltage: 220...240 V • Line voltage: 198...264 V • Line frequency: 50...60 Hz • Lamp start with optimum filament preheating • Energy Efficiency Index EEI: A2 • Automatic shutdown of defective lamps and at end of life (EoL T.2) • Lamp operation: to EN 60929Safety: to EN 61347-2-3

Produktfordeler: Lang lampelevetidIngen negative effekter av hyppig på/av-brytingAutomatisk omstart etter lampeskiftePerfekt lampestart for applikasjoner med bevegelsessensorerVDE/VDE EMC-sertifisert systemSvært høy energieffektivitet på grunn av kutt-teknologiBruksområder: Åpne kontorlandskap, korridorer og lagringsromOffentlige bygningerStripelysEgnet for nødbelysning (DC-drift)Egnet for armaturer i beskyttelsesklasse I

Produktegenskaper • Forsyningsspenning: 220...240 V • Linjespenning: 198...254 V • Linjefrekvens: 50 Hz • Automatisk avstenging av defekte lamper og ved slutten av levetiden (EoL) • Sikkerhet: til EN 61347-2-3 • RI-undertrykkelse: til EN55015:2006+A1:2007+A2 :2009/CISPR15 • Linjeharmoniske svingninger : til EN61000-3-2 • Immunitet : til EN61547 Produktfordeler Automatisk omstart etter lampeskift

Product features • Supply voltage: 220...240 V • Line voltage: 198...264 V • Line frequency: 0 Hz, 50 Hz...60 Hz • Lamp start with optimum filament preheating • Life time: >100,000 h (for T = 65°C at Tc) • Energy Efficiency Index EEI: A2 BAT • Automatic shutdown of defective lamps and at end of life (EoL) • Safety: to EN 61347-2-3 • Lamp operation: to EN 60929 • RI suppression: to EN 55015:2006+A1:2007+A2:2009/CISPR 15 • Line harmonics: to EN 61000-3-2 • Immunity: to EN 61547 Product benefits • Perfect lamp start for applications with motion sensors • Automatic restart after lamp replacement