Droner - side 3

Key Features
For DJI O3 Air Unit
Works with DJI Goggles 2 & FPV Goggles 2
O3+ Video Transmission System
1080p H.265 Stream from up to 6.2 Miles

The DJI Transmission Module for O3 Air Unit is a replacement for the transmission module that comes with the O3 Air Unit.

An essential part of the O3 Air Unit, this module uses the DJI O3+ video transmission system to stream footage back to a pilot's DJI Goggles 2 or FPV Goggles 2 from up to 6.2 miles away.

Using frequency auto-switching and the Air Unit's omnidirectional antenna (not included), the Full HD 1080p H.265 video stream is kept stable and interference-free.

The module attaches to your existing camera module with a coaxial cable (not included) via a convenient quick release design.

Batteri 4S, Li-pol, 5000 mAh

Propeller, for Mini 2

Overview
The DJI Mavic 3 Fly More Kit includes two Intelligent Flight Batteries, a 100W Battery Charging Hub, a 65W Car Charger, a Convertible Carrying Bag, and Low-Noise Propellers, providing comprehensive support for your aerial photography experience at a better price than buying these items separately.


1. Intelligent Flight Battery: One Intelligent Flight Battery provides a 46-min* max flight time, allowing you to explore more of your surroundings and fly with greater peace of mind.

2. 100W Battery Charging Hub: Expands the charging interface to three. The battery charging hub enhances efficiency by charging batteries in sequence according to their remaining power level, with more fully-charged batteries receiving power first.

3. 65W Car Charger: A must-have on the go, the 65W Car Charger can charge different devices in the car. It provides a stable output power of 65 W and two output ports (USB-C and USB-A) for charging the Intelligent Flight Battery and remote controller at the same time. It also supports PPS and PD protocols to charge your smartphone, laptop, and other devices.

4. Low-Noise Propellers: Each propeller blade has been put under precise dynamic balancing tests to increase aerodynamic efficiency and output less noise.

5. Convertible Carrying Bag: This well-designed bag can be used as either a shoulder bag or a backpack to meet your needs for short trips.

Overview
3-i-1-kabelen kobles raskt til luftmodulporten. Strømkabelen og signalkabelen er begge merket i forskjellige farger.

Høydepunkter
Enkel modulær montering og demontering, lett design.

Tips
Se brukermanualen for ledningsinstruksjoner.

I esken
DJI FPV Air Unit 3-i-1-kabel × 1

Spesifikasjoner
Lengde: 205 mm (uten terminal)

Kompatibilitet
DJI FPV Air Unit

DJI Air 3S ND Filters Set（ND8/32/128）

Opplev enestående luftfotografering med DJI Air 3S, en drone med to kameraer designet for reiseentusiaster. Utstyrt med et 1-tommers CMOS primærkamera og et 70mm medium telekamera—begge med opptil 14 stopp dynamisk rekkevidde—kan du fange fantastiske landskap, portretter og mer i imponerende detalj. Nyt avanserte funksjoner som nattlandskapshinderdeteksjon, neste generasjons Smart RTH og opptil 45 minutters flytid. Kompakt men kraftig, DJI Air 3S er din perfekte følgesvenn for å jakte på utsikten og fange hvert øyeblikk.

DJI Air 3S Intelligent Flight Battery

The DJI Camera Module for O3 Air Unit is a replacement for the camera module that comes with the O3 Air Unit. An essential part of the O3 Air Unit, this module provides the optics necessary to view streaming FPV footage and capture video during flight. The camera is capable of recording video at 4K resolution at 60 fps and storing it in 20GB of built-in storage. The module sports a 1/1.7" sensor and a super-wide 155° field of view, which lets you capture and stream stunning and expansive aerial shots.

Additional Features
D-Cinelike color mode for more flexibility in post-processing color grading
Supports optional DJI Avata ND filters to adjust exposure

Oversikt
Optimalt designet for å beskytte gimbalen og kameraet, samt mer praktisk oppbevaring av propellbladene.

Høydepunkter
Gimbalbeskyttelse og propelloppbevaring

I esken
DJI Mavic 3 Oppbevaringsdeksel × 1

Kompatibilitet
DJI Mavic 3 Classic
DJI Mavic 3
DJI Mavic 3 Cine

Landing Gear Extensions Set, for PGYTECH DJI MINI 3 PRO

USB-kabel, 24 pin USB-C (hann) til 24 pin USB-C (hann), for DJI Mavic Air 2

Designed for the DJI Mini 3 drones, these propellers stand out for their lower noise levels and have undergone a series of precise dynamic balance tests to improve their aerodynamic performance. They are also very easy to install. Please note: when replacing propellers, use propellers from the same pack - do not mix propellers from different packs.

75 cm landepute for droner

Save yourself time and money by packing this set of four Propellers for Avata 2 from DJI into your gear bag. A day of shooting doesn't have to end because of a broken propeller. With an optional screwdriver, you have everything you need here to replace all of the propellers on the DJI Avata 2. Included in the set are two clockwise propellers, two counterclockwise propellers, and the eight screws needed to attach them to the Avata 2's arms.

In the Box:

DJI Propellers for Avata 2 (Set of 4)
2 x Clockwise Propeller
2 x Counterclockwise Propeller
8 x M2 x 8.7mm Screw

Compatibility: DJI Mavic 3 Pro, DJI Mavic 3 Pro Cine
Safety during transport and storage
Easy to install and remove

Mavic Air 2 Propeller Holder, for DJI Mavic Air 2

Mavic Mini Snap Adapter

Sunnylife drone landing pad 50 cm (DJI-TJP05)
The Sunnylife landing mat is made of water-resistant material. With a diameter of 50 cm, it will work well for drones such as the DJI Mavic Pro / Phantom 3 / 4 / Pro / Pro+, etc., and the included carrying case will make storage easier.

Thoughtful design
The mat was made of water- and scratch-resistant material, so you can use it regardless of the conditions. What's more, the non-slip finish ensures stability. In addition, cleaning the DJI-TJP05 will not be a problem for you. The mat is also equipped with symbols indicating world directions, so you can locate the position of your drone faster.

Convenience of use
In addition to the landing pad, the kit comes with a special case to store the mat and ensure safe transportation. In addition, in the package you will find 3 plastic mounting pins to increase the mat's stability and 8 reflective strips to make landing after dark easier.

Included
landing pad
case
plastic mounting pins x3
reflective strips x8

Whether you want to safely transport your drone to a location or just have it on hand if the mood strikes, the DJI Drone Sling Bag is a great way to keep your gear protected while you're on the go. With a zippered lid opening, you can easily access the contents of the bag while carrying it over your shoulder. Inside are three padded compartments designed for compact drones and accessories, such as the Avata 2. In fact, it can hold the Avata 2, Goggles 3, RC Motion 3 or FPV Remote Controller 3, three flight batteries, a two-way charging hub, and more.

• Additional Features
• Soft-shell exterior
• Mesh pouch inside the lid
• Exterior side pouch
• Adjustable shoulder strap

Valgte egenskaper
Hold antennene minst 40 mm fra hverandre.

Hold luftenheten borte fra metallgjenstander eller karbonfiberrammer. Vær sikker på å velge en posisjon der overføringen ikke vil bli blokkert under flygingen.

DJI FPV Air Unit er utstyrt med MMCX-antenneporter. Siden porten (den indre pinnen) er liten, når du trekker ut antennen, hold luftenheten med den ene hånden, trykk de to endene av antennen med den andre hånden og fjern den horisontalt.

Merk at å trekke i antennen direkte kan føre til at den indre pinnen og kragen faller eller blir skadet.

Innholdet i esken
2x DJI FPV Air Unit Antenna (MMCX)

Tekniske spesifikasjoner
VSWR<2 frekvensområde: 5,4 GHz-6 GHz, 2,75 dB gevinst og 3 dB aksialforhold strålebredde ved 5,8 GHz

Størrelse: 12.7 × 12.7 × 80 mm

Vekt: ​​3.9 g

Kompatibel med
DJI Digital FPV System