Duka - side 3

Transition piece Type 2, Ø102/127/162 mm

Fan without controls. Timeless and smooth front. 68 m3/h - sound level 26 dB(A) - 3 year warranty.

Used when the fan S7 does not cover the duct opening. With rubber seal on the back and 4 screws for installation.

Duct fan for installation in the attic directly in the ventilation duct. It is recommended to secure the fan with mounting clamps (which are purchased separately) so that the vibrations of the powerful motor are not transferred to the ventilation duct. The fan has two stages and can be regulated either via two phases directly through a switch at either 145 or 187 m3/h. In contrast, the fan cannot be controlled via an external stepless regulator.

Ølglass, 45 cl, avhendbar, gjennomsiktig (en pakke 22)

Damper for EL 600, 700 and S7. Mounted on the exhaust pipe of the fan. The shutter consists of a clear plastic film that is blown up when the fan is running. The shutter is only intended for wall mounting.

Flex hose Ø102x3000 mm, white

Flex hose Ø127x3000 mm, white

Flex hose Ø152x3000 mm, white

Flex hose Ø127x6000 mm, white

Flex hose Ø127x25000 mm, white

Ventilation pipes are manufactured in 2mm PVC. With smooth ends.

Lydkabel, RCA x 2 hann til mini-phone stereo 3.5 mm hann, 1.8 m

Transition piece for wall penetration type 201. With the Duka click system, two transition pieces are clicked together. Thereby, two different channel dimensions are combined in an easy and simple way. Always remember to seal with glue or silicone. Colour: White Manufactured in Polystyrene (HIPS).

Transition piece for Ø100mm. With the Duka click system, two transition pieces are clicked together.

Ensures tight connection between exhaust pipe and ceiling valve. Prevents condensation damage to the ceiling panel. The Klik system means setting up valves without screws and enables the valve to be removed for cleaning. Fits flap valve type 113.

Maintenance - Filter

Telescopic pipe for wall, with sound insulation. Can be adjusted in length. Valves and grates are mounted on these with a click system. Type 204 can be extended with an extra piece.

Flap valve Type 112, 100x150 mm, white

Grate with square frame and round flange. Without insect net. Suitable for wall penetration type 204.

Jalousie grille with insect net, which is mounted directly on the wall, plinth or gable. Fasten with 1 screw in each corner or with sealant. Can be used for all types of ventilation tasks. The insect net prevents the entry of insects. If the grate is used in the exhaust from a tumble dryer, we recommend removing the insect netting so that lint from the tumbler does not clog the grate. Manufactured in aluminum plate.

Has small ribs under the slanted blinds to keep insects and other small animals out. Suitable for wall penetration type 201.

Has small ribs under the slanted blinds to keep insects and other small animals out. Suitable for wall penetration type 202.

Louvers for air intake and return. With flange and with fly net. Cast in aluminium.