SkyRC Fjernstyrt - Lav pris. Stort lager

SkyRC Charger T1000 Maestro

SkyRC T1000 Maestro charger
SkyRC T1000 Maestro is a new, incredibly powerful RC model charger that stands out with up to 450W (AC) or even 1000W (DC). It uses an advanced Arm Cortex-M4 core and is equipped with a color display that will provide you with the most important information regarding its operation. It allows you to use 2 ports at the same time, and you will have no problem transporting it. Special Charger Master software is also available, which provides even more capabilities.

Reliable performance
Push the limits with the SkyRC T1000 charger and get more options for your next RC race. The product supports advanced DSP technology and has a state-of-the-art Arm Cortex-M4 core, which also uses a coprocessor (FPU). As a result, it can deliver incredible speed, performance and reliability! Bet on proven solutions and choose a charger that works in almost every situation.

Even faster charging
Enjoy even faster charging. The charger is equipped with 2 ports that will allow you to charge 2 batteries simultaneously in a short time. You can also choose between AC and DC input. In AC mode, the charging power reaches 450W, and in DC mode it is up to 1000W! This will charge your batteries up to 9 times faster (in AC mode) or up to 20 times faster (in DC mode) than with standard chargers.

Intelligent power distribution
When you use only one port, the charger will direct all its power to that port and provide up to 20A. When you use both ports, the charging current parameters will be dynamically and intelligently divided between each of them. So you can enjoy optimal performance in most situations! What's more, when one port finishes working, the other will start charging at full capacity. When using 2 outlets simultaneously, the total current is up to 35A.

Digital power supply
The T1000 will not only perform well as a charger, but can also act as a digital power supply. All it takes is a few clicks on its menu! The product offers a voltage of 5-27V with 0.1V increments and an adjustable current of 1-15A. It is also equipped with short circuit, overload and reverse polarity protection. Thus, it provides unparalleled performance and safety!

Additional capabilities
Do you care about additional capabilities? Try the separately available devices that work with the charger! For example, the BD350 discharger provides a maximum of 40A. In combination with the T1000 Maestro, it also allows you to check the condition of the battery using Charger Master software. There is also a charging hub that can handle up to 150W and offers up to 4 ports (3x USB-C, 1x USB-A).

User-friendly interface
The charger features an easy-to-read 2.8″ TN LCD screen with a clear ColorX interface. It provides a resolution of 240x320 and displays the image in 262,144 colors. Also noteworthy is the 250:1 contrast ratio. Responsive Web2.0 menus and specially designed icons make operating the device much simpler and more pleasant! What's more, the interface offers 4 languages to choose from - English, Dutch, Chinese and Japanese.

Will prove itself while traveling
Take the charger to your next RC event and don't sacrifice the ability to quickly charge your batteries while you're away. The T1000 Maestro is compatible with 100-240V, which means you can use it in many countries around the world without any problems. The product is also equipped with a special handle, which makes it much easier to carry.

Try out the Charger Master software
Get convenient access to the most important information - just use the Charger Master software. Simply connect the T1000 charger to your computer with a USB-C cable! Once you do, for example, you can download OTA updates and sync the latest software version to the cloud in real time. You can also view a graph of charging/discharging data.

In the box
T1000 charger
AC power cable
User manual

2 678,00 kr (2 142,40 kr)

Bestillingsvare, 7-9 dager til forsendelse

SkyRC Charger T200 2 x 100W

Double the power and mobility
The SkyRC T200 charger has the most compact design, taking up minimal space, the tick of a pair of batteries. The charger delivers 100 watts of integrated power through each charging circuit. Behind the tasteful casing is enough power to charge two batteries simultaneously at up to 12 amps per channel, so you'll be pumping life into a wide range of batteries in no time, from receiver packs to 6S lithium polymer or NiMH and NiCD 15S batteries. What's more, the charger provides all the programmability you expect from a modern high-end charger.

Multiply efficiency
Both charging channels can be programmed and operated individually. The T200 allows two batteries to be charged intelligently, automatically and simultaneously to their maximum capacity. What's more, the cells being charged do not have to have the same configuration or be of the same type. Feel completely free to choose which packs to charge.

Compatibility and universal XT60 plug
The charger has a charging algorithm that allows it to work with the most common battery types - LiPo, LiIon, LiHV, LiFe, NiMH, NiCD and Pb. The XT60 interface prevents reverse polarity and ensures a very stable connection.

Optimised software
The SkyRC T200 has a so-called AUTO function, which automatically sets the current during charging and discharging. For lithium batteries in particular, the function helps prevent overcharging, which can lead to an explosion due to the user. The function automatically shuts down the circuit and informs the user when an abnormality is detected. All programmes on the T200 are controlled by a two-way signal to ensure maximum safety and minimise problems. All settings can be configured by the user.

Intuitive operation
A panel of five buttons and a brightly illuminated LCD screen make operation of the unit effortless, even for inexperienced users. The charging programmes work in a similar way to other SkyRC chargers, but even if this is your first contact with a programmable charger, you will easily move between parameters by using the up and down arrows to set values and then clicking enter to confirm.

Versatility with AGM and cold modes
AGM batteries are easy to maintain, are very stable and lighter than other lead-acid batteries. Although they have the same structure, the difference in chemical components translates into a big difference in performance. AGM batteries should not be charged with a normal charger in Pb mode. Cold mode allows the battery to be charged at a low temperature.

Adjustable terminal voltage
The SkyRC T200 allows users to change the terminal voltage (for advanced users only).

Special handle
The charger is equipped with a special handle. Its compact design at less than 1 kg makes it the most convenient charger to carry.

Included
T200 charger
Power cable

1 399,00 kr (1 119,20 kr)

Bestillingsvare, 7-9 dager til forsendelse

SkyRC Discharger & Analyzer BD380

The SkyRC BD380 is an advanced discharger and analyzer that combines a range of functions to ensure precise and efficient battery management. This product, developed by SkyRC, is dedicated to professionals and enthusiasts, offering advanced testing and analysis capabilities in a single device.

1 585,00 kr (1 268,00 kr)

Bestillingsvare, 7-9 dager til forsendelse

SkyRC Smart Charger B6neo

Smart SkyRC B6neo charger
B6neo is a compact charger with great power. Despite its small size, it is capable of delivering up to 200W of power when charging connected to DC power. In addition, it can act as a digital power source, offering adjustable voltage from 5 to 27V and current from 1 to 10A. The ColorX interface, built-in safety features and easy firmware updates through the dedicated Charger Master app, make the B6neo a charger suited to today's needs. Safety, power and convenience are what set SkyRC's product apart.

Comfortable charging
Charging doesn't have to be boring! The B6neo, despite being almost 4 times smaller than its predecessor, still has plenty of power. Connected to a DC power supply, it can charge up to 200W with a maximum current of 10A. Even connected to a modern USB-C PD type power supply, it effortlessly delivers up to 80W. Despite its small size, B6neo exceeds expectations in every way! Experience an unparalleled combination of power and portability with SkyRC.

Digital power source
B6neo not only charges professionally, but can also act as a digital power source. After a few clicks in the menu, the device is ready to use, offering optimal voltage from 5 to 27V in 0.1V increments, adjustable current from 1 to 10A. What's more, the SkyRC B6neo charger has several built-in safety features. Short-circuit, overload and reverse polarity protection are the cornerstones here, so you can rest assured that using SkyRC equipment is completely safe.

ColorX interface
Discover the new ColorX interface introduced by B6neo based on simple and textural visuals! The luminous blue and green color scheme was created specifically for RC charging. Helps you focus on your settings. Responsive Web2.0 menus and well-designed icons make the user experience more suitable for those accustomed to using smartphones! It's time to say goodbye to boring typography and welcome a bold and beautiful new user interface. Life doesn't have to be boring, and neither does charging!

Quiet operation
Even at full load, B6neo's cooling fan operates at a maximum sound level of 48 dB, which is acceptable for most users. You are free to study, fine-tune your strategy or relax while charging without distractions or interruptions. Focus on what is really important to you.

Multiple capabilities
The built-in balancing port allows the B6neo to discharge up to 24W faster when used together with the main port. When the balancing port is connected, the B6neo is a versatile battery tester capable of measuring the cell voltage and balancing status of LiPo, LiHV, LiFe and LiIon batteries. The total voltage of each cell will be displayed in real time to help determine whether the battery is charged or discharged and whether it needs balancing. Proper care and monitoring are key to ensuring their safety and longevity.

Dedicated app
Easily upgrade your charger with the included Charger Master app. Stay up to date and receive instant notifications! What's more, upgrading your charger is as easy as plugging it in through the Type-C port. Enjoy new capabilities as each update brings bug and compatibility fixes, improved stability and enhanced performance.

Comfort of use
SkyRC's charger is not only a highly functional device, it's also a comfort device. You can easily change the language with a few clicks, making using B6neo even more enjoyable. Currently available languages include English, Dutch, French, Chinese and Japanese. What's more, this product is designed to meet global safety standards, so you can take it with you on any trip!

576,00 kr (460,80 kr)

Bestillingsvare, 7-9 dager til forsendelse

SkyRC Charger e450 2-4S / 6-8S LiPo / LiFe / LiHV

SkyRC E450 is a universal charger dedicated to 2-4 S LiPO/LiFe/LiHV and 6-8S NiMH packs. It is extremely easy to use, and will charge small capacity batteries very quickly. The status of the charger is indicated by 4 LEDs. In addition, the charger automatically detects the charge of the batteries and finishes charging. The charger comes with a power cable for connecting to 230 V mains power.

380,00 kr (304,00 kr)

Bestillingsvare, 7-9 dager til forsendelse

SkyRC Charger e455 2-4S LiPo / LiFe / LiHV / 6-8S

E455 from Skyrc is a high quality 100-240V AC charger designed to charge LiPo, LiFe and LiHV batteries with 2-4 cells in balance mode. In addition, the XT60 connector provides charging safety and protects against reverse polarity.

380,00 kr (304,00 kr)

Bestillingsvare, 7-9 dager til forsendelse

SkyRC iMAX B6mini battery charger

SkyRC iMAX B6mini batterilader

750,00 kr (600,00 kr)

Bestillingsvare, 7-9 dager til forsendelse

SkyRC Battery Discharger Analyzer BD250

Simple and sure
SkyRC BD250 is a discharger and battery tester in one. The device displays battery voltage, discharged charge and discharge current in real time. The maximum discharge current is as much as 35 amps and the maximum discharge power is 250 watts. The BD250 also accurately measures capacity so you can choose the most appropriate battery for your needs. You can be sure that with the SkyRC discharger you will maintain optimal performance and lifetime of your batteries.

Updated version
The BD250 is based on the BD200 model. It combines a stylish design with high performance and advanced technology to ensure constant discharge of 250 watts.

Not just unloading
SkyRC BD250 allows you to test batteries of any type with 5.4 V up to 35 V. The device has a built-in fan, which is part of an advanced cooling system, ensuring optimal operation of the device, even when discharged at full power.

Comfortable operation
The knob on the front panel allows you to easily change parameters that can be read on the LCD display.

Software
Thanks to dedicated PC software, the BD250 allows you to export battery voltage values in 30-second intervals (for the first 6 minutes).

Included:
BD260 Unloader
Unloading cable with connector XT60
Fuse

1 195,00 kr (956,00 kr)

Bestillingsvare, 7-9 dager til forsendelse

SkyRC Charger D260

SkyRC D250 is a two-channel charger with two independent circuits, thanks to which you can charge two types of batteries simultaneously. The charger has a synchronization mode in which the user can apply the same settings for both circuits, saving time on unnecessary configuration. A complete novelty used in the D250 charger are voice messages. The messages inform about the current mode of operation, activation of the charger protection and the next steps during configuration. The messages are available in English. The charger can be used as a lithium battery meter and a resistance meter. There is also an automatic current, temperature and processing time limit, which makes the charger extremely safe.

1 560,00 kr (1 248,00 kr)

Bestillingsvare, 7-9 dager til forsendelse

SkyRC Gyroscope for RC Car Models Gyro GC301

SkyRC GC301-Gyro is dedicated for RC cars. The device uses a gyro sensor and a special algorithm to adjust the position of the wheels for even better stability and handling characteristics. The GC301 makes the model even more maneuverable and easier to control. It is also extremely lightweight and small, so it can be used on models of any scale without worrying that it will prove too heavy or significantly increase the weight of the model.

589,00 kr (471,20 kr)

Bestillingsvare, 7-9 dager til forsendelse

SkyRC Charger e430 2-4S

SkyRC e430 2-4S charger
SkyRC E430 is a universal charger dedicated to LiPO 2-4 S packs. It is extremely easy to use, and will charge small capacity batteries very quickly. The status of the charger is indicated by 4 LEDs. In addition, the charger automatically detects the charge of the batteries and finishes charging. The charger comes with a power cable for connection to 230 V mains power.

Included:
E430 charger
Power cable
XT60 cable terminated with bananas

340,00 kr (272,00 kr)

Bestillingsvare, 7-9 dager til forsendelse

SkyRC Voltage Meter LiPo Pal

SkyRC LiPoPal is a simple battery tester and voltage balancer. When flying outdoors, it is difficult to determine the remaining capacity of a battery. This small device allows you to check the voltage of each cell and determine the remaining charge by percentage anytime and anywhere.

As we know, if the cells of the pack are balanced, the operation of the battery is much better and the life is longer. But sometimes we may not have the time or tools to balance the cell voltage. This small device, upon detecting the voltage imbalance, will immediately start balancing them.

310,00 kr (248,00 kr)

Bestillingsvare, 7-9 dager til forsendelse

SkyRC Power supply eFuel 50A/1200W

SkyRC eFuel strømadapter og vekselretter Innendørs 1200 W Sort, Rød

3 575,00 kr (2 860,00 kr)

Bestillingsvare, 7-9 dager til forsendelse

SkyRC Charger D200

SkyRC D200neo Charger
Get acquainted with the D200neo, a device that provides instant charging with up to 35A of current. It is designed to save users' time, as it is always ready to go. This advanced device is comfortable to use, thanks to its built-in color display. In addition, it intelligently and dynamically distributes charging power. The D200neo also supports USB-C 3.0 Power Delivery (PD), enabling faster and more efficient charging.

Fast and smart charging
The D200neo provides dual-port parallel charging with a lightning fast charging current of up to 35A. It is designed to save your time to the maximum. This device is always ready for action! Thanks to an innovative combination of software and MCU, D200neo provides supercharging. It also intelligently and dynamically distributes charging power when both ports are active simultaneously. When only one port is active, D200neo will direct all its power to that one port, guaranteeing optimal and fast charging. In addition, it also supports USB-C 3.0 Power Delivery (PD) for even faster and more efficient charging.

More options
The SkyRC device is equipped with dual ports that operate independently, providing efficient and simultaneous charging of two batteries. What's more, the D200neo offers the flexibility to choose between AC and DC input, adapting to different scenarios. In AC mode, it provides charging power of up to 200W, while in DC mode, the output increases up to 800W. In addition, you can choose DC charging at 800W for the greatest efficiency, or use AC charging at 200W to tailor its performance to your specific needs. The D200neo is an absolute revolution in the world of RC chargers.

Professional charger
The D200neo is not only a professional charger, but also a high-quality digital power supply. At the click of a menu, the D200neo is ready to go, offering optimal voltage from 5-27V with 0.1V increments and adjustable current from 1 to 15A. Additional protections against short circuit, overload and reverse polarity ensure safety and peace of mind during use. What's more, the D200neo is equipped with a 200 MHz ARM microcontroller, which is able to increase the resolution of the ADC to 16 bits thanks to its oversampling technology. A powerful PID mechanism precisely adjusts the current, providing a responsiveness and accuracy of charging current that is unmatched by most standard devices on the market.

All information at your fingertips
SkyRC has a built-in display with ColorX interface, which makes the information presented in color, making it much easier to operate the device. When working with the BD350, the D200neo can use the customized SkyRC Charger Master to display or export the battery discharge curve in real time. This makes it possible to compare and analyze the discharge curves of different batteries to accurately detect faulty batteries. NOTE: The BD350 and SkyRC Charger Master are not part of the kit.

Thoughtful design
Thanks to its universal input voltage circuit, you can take the SkyRC device with you on any trip, no matter where you go! In addition, this product is designed and approved to meet global standards for safety, electromagnetic compatibility and other mandatory regulatory requirements. With SkyRC, you are always ready to travel!

Easy control
The D200neo, connected to a PC or Mac via USB-C, allows monitoring and control via the SkyRC Charger Master app. You can also update the charger as OTA and synchronize the latest software in real time with a dedicated cloud. Charging and discharging data can be analyzed and displayed in a graph. The interface is currently available in English, Dutch, Chinese, French and Japanese. Users can easily change it with simple clicks, making SkyRC use even more convenient.

1 735,00 kr (1 388,00 kr)

Bestillingsvare, 7-9 dager til forsendelse

SkyRC GNSS Performance Analyzer GSM020

Real power
SkyRC has specifically designed a tool for remote control model enthusiasts to measure their speed and other data. The GSM020 allows you to connect to an app where you can monitor real-time data or their history. Simply attach the device to any car, drone or aircraft and hit the road.

High accuracy
GSM020 supports GNSS- GPS and GLONASS satellite navigation systems, allowing for very high positioning accuracy. The device allows measurement of acceleration, G force, speed, time, distance and more.

5 hours of operation with LiPo battery
Thanks to the built-in lithium-polymer battery, which allows up to 5 hours of uninterrupted operation, you don't have to worry about the device's short runtime. You can then easily recharge it via the micro USB port.

Mobile app
The free GNSS PA app allows you to track the device's speed remotely from your iOS or Android phone. Built-in Bluetooth 4.0 allows real-time data monitoring. Three modes: Drag, Track and Flying allow you to analyse your driving or flying route with ease.

All data in one place
The GNSS PA app automatically creates graphs. Laps on the track can be analysed in the app for average speed, maximum speed, acceleration at a given time and distance. Set your own time/distance range to check braking speed, accelerations up to 30 km/h, G-forces. Check altitude, speed, time and distance in flying mode.

Built-in 1 Mb memory
The built-in memory allows 50 records to be stored. Data can be easily transferred to a smartphone. When the flash memory is full, the oldest records will be automatically overwritten. There is no longer any need to remember to delete data or worry that key data will not be saved when the memory is full.

976,00 kr (780,80 kr)

Bestillingsvare, 7-9 dager til forsendelse

SkyRC TLD001 Thermologger Duo

The SkyRC TLD001 Thermologger Duo thermometer
SkyRC Thermologger Duo is an innovative device that provides precise temperature measurements to optimize the performance of your RC model. With advanced temperature sensors, Bluetooth communication and easy installation, the Thermologger Duo is an essential tool for hobbyists and RC professionals. In addition, the device's compact size and long battery life make it practical and convenient to use. With this device, you will be able to improve the performance of your RC model and share your results with other enthusiasts.

Precise measurements
You no longer need to check the temperature of your devices with your hands. Use the SkyRC thermometer for that! The Thermologger Duo provides precise temperature measurements with fast response time. Its accuracy is ±2.0℃(35.6℉) for temperatures between -20℃(-4℉) and 100℃(212℉) to ±2% for temperatures above 100℃(212℉). With temperature sensors that meet industry standards, you can easily measure the contact temperature of various components such as motors, ESCs, heat sinks and wires. The dual-channel function allows you to measure the temperature of two different contacts simultaneously. Moreover, Thermologger Duo has a wide temperature detection range of -20℃ to 210℃（-4℉-410℉).

Easy communication
With built-in Bluetooth, the Thermologger Duo allows instant communication via a mobile app, eliminating the need for cables. With it, you can easily read data, check thermograms and troubleshoot problems while building successful modifications and maximizing uptime. In addition, you can capture mechanical, electrical and thermal measurements in it, which you can look at wherever you are from your smartphone, tablet or computer. Plus, you can easily share measurements with others!

Comfort of use
The Thermologger Duo is designed for easy installation in the field, so it comes with two pairs of 30 cm cables. The kit also includes high-quality copper foil stickers with excellent electrical conductivity, adhesion, flexibility and temperature resistance. What's more, you can adjust them to almost any shape. Mount the recorder with the clamp, cut the wires and mount with the sticker!

Long working time
Thermologger Duo is compact (its dimensions are only 38 × 30 × 16 mm), but demonstrates long operating time. It is powered by a CR2450 battery, which is included with the device and allows about 96 hours of continuous operation under normal conditions. When the battery eventually runs out, it can be easily replaced by unscrewing the cover.

In the set
thermometer
CR2450 battery
wires
copper foil stickers

276,00 kr (220,80 kr)

Bestillingsvare, 7-9 dager til forsendelse

SkyRC Charger e3 Duo 2 x 20W

SkyRC e3 Duo charger is the successor to the two-channel version of one of the most popular SkyRC chargers. E3 Duo allows you to charge batteries LiPo, Life, LiHV 2-3S with 20 W per channel and a maximum charging current of 2.2 A. Adjust the charging current to the capacity of the battery by selecting the appropriate value - 0.5, 1, 1.5 or 2.2 A.

440,00 kr (352,00 kr)

Bestillingsvare, 7-9 dager til forsendelse

SkyRC Charger LiPo E3

SkyRC E3 is a universal charger dedicated to LiPO 2-3 S packs. It is extremely easy to use, and will charge small capacity batteries very quickly. The status of the charger is indicated by 3 LEDs. In addition, the charger automatically detects the charge of the batteries and finishes charging. The charger comes with a power cable for connection to 230 V mains power.

330,00 kr (264,00 kr)

Bestillingsvare, 7-9 dager til forsendelse

SkyRC Charger PC1080

Unrivalled industrial drone charger
SkyRC PC1080 is a dual channel charger for industrial applications charging 6S lithium-polymer batteries. The charger is very safe and easy to use with a wide range of additional functions such as voltage meter, internal resistance meter, LiHV charging mode and synchronization mode.

Power and durability
Advanced mechanical design serves to save space. The best components of well-known brands guarantee stability and durability. The 32-bit high speed processor with STM icroelectronics has up to 20 times the processing capacity. High-quality, large capacitors guarantee a long device life, while the condenser coating helps to withstand harsh environmental conditions and protects against moisture, dust, chemicals, corrosion and extreme temperatures. All these features make for an extremely stable charger operation in the field.

Active PFC
Active PFC (Power Factor Correction) uses device circuits to correct the amount of power consumed in such a way as to obtain the best power factor, achieving an efficiency of 93% (23% better than without PFC).

Automatic charging of 12 batteries
After pairing the charger with G630 charging hubs, automatic charging management systems, the PC1080 is able to charge 12 LiPo batteries one by one according to their level of charge. The batteries with the highest level of charge will be charged first. Advanced mechanical design serves to save space. The best components of well-known brands guarantee stability and durability. The 32-bit high speed processor from STMicroelectronics has up to 20 times the processing speed.

Effective cooling
High speed double bearing fan with aluminium fin-type heat sink provides excellent ventilation and stable temperature necessary for the most efficient operation.

Chargers synchronization
The charger synchronization function allows users to control two or more chargers simultaneously over the data cable. All SLAVE chargers will mimic the parameters of the MASTER charger, which significantly reduces the charging time of many similar batteries.

Internal Resistance Meter
With this function, the internal resistance of each cell is displayed on the screen. The internal resistance is a key element, signaling the condition of the battery. A lower resistance indicates higher quality batteries. In addition, this value helps to pair your batteries.

3 560,00 kr (2 848,00 kr)

Bestillingsvare, 7-9 dager til forsendelse

SkyRC Charger PC520

New function
SkyRC PC520 is a charger designed specifically for charging drones with a built-in power supply. The device is able to charge 6S LiPo batteries with a built-in balancer and use battery storage mode. During operation, the charge/discharge data is displayed in real time on the LED display, which also informs about charging errors. Maximum charging safety is ensured by the safety features, including protection against short circuiting and incorrect polarity. The maximum PC520 has a maximum charge power of 520 W and a maximum current of 20 A.

Included:
SkyRC Charger PC520
Power Cable
XT90 charging cables with banana

1 621,00 kr (1 296,80 kr)

Bestillingsvare, 7-9 dager til forsendelse

SkyRC Charger B6AC Neo

Charger B6AC Neo
The SkyRC B6AC Neo charger will surprise you with its vast capabilities. It can charge batteries with up to 200 watts (DC) or 60 watts (AC), as well as discharge them and monitor their condition. It stands out for its impressive performance and quiet operation, and thanks to the use of GaN technology it is extremely compact, making it much easier to transport. The device will also work well as a regular charger for a smartphone or laptop - it will provide power of up to 65 watts.

Innovative GaN technology - high performance, small size
The charger uses innovative GaN technology, so it combines high performance, efficient heat dissipation and a compact design. The device is smaller than a standard credit card, allowing for convenient, hassle-free transportation. You can carry it with you at all times!

Impressive power
Forget about the long wait until your batteries are charged. When the charger is powered by direct current (DC), it provides up to 200 watts of power, allowing you to reduce charging time to about 10 minutes. On the other hand, if you use alternating current (AC), the device's power will be a maximum of 60 watts. This will allow you to charge the battery in about 20 minutes! What's more, the XT60 DC interface and compatibility with 100-240 V AC provides more flexibility and freedom. Note: measurements were taken while charging a 6S LiPo battery with a capacity of 1300 mAh.

Discharge your battery in a few moments
Need to discharge a battery quickly? No problem - the B6AC Neo charger is equipped with a special port for efficient, effective discharging. Combined with the main port, it provides up to 19 watts of power. What does this mean in practice? For example, it only takes about 1.5 hours to discharge a 1300 mAh LiPo 6S battery. Remember, however, that if you choose to use only the main port, the power will be limited to 5 watts.

Check the condition of your batteries
Monitoring the condition of your batteries and taking proper care of them is the key to prolonging their life and ensuring your safety of use. The SkyRC B6AC Neo charger will help you do just that! With its help you can easily check the cell voltage and balance. This way you will always know if your battery needs charging, discharging or balancing! Note: the voltage and balance measurement function is available for LiPo, LiHV, LiFe and LiIon batteries.

Universal charger and digital power supply
With the SkyRC B6AC Neo charger you will charge not only your batteries, but also, for example, your smartphone, laptop or Nintendo Switch console. The device is equipped with an additional USB-C port, which supports PD 65 W fast charging. This allows your equipment to be up and running in no time! In addition, the B6AC Neo will prove itself as a digital power supply - it offers an optimal voltage of 2-27 V with 0.1 V increments and an adjustable current of 1-10 A.

Performance and safety
The charger uses a patented rectifier circuit to efficiently convert DC current for safe power supply. It also has a built-in MCU that precisely controls charging to minimize power loss. Its added advantage is an advanced protection system against short circuit, overheating and overvoltage, among others. So you can enjoy not only performance, but also safety!

User-friendly
Convenient operation of the charger is made possible by the built-in display with the new ColorX interface, which features a clear, responsive menu and specially designed, easy-to-read icons. What's more, you can choose from up to 5 languages - English, Dutch, French, Chinese and Japanese. Also noteworthy is the quiet operation of the device - even at full load the volume level of its fans is only about 48 dB. Don't be afraid of annoying noise! There is also a dedicated Charger Master app, which, among other things, allows you to conveniently update the charger's software - just connect it to your computer via a USB-C port.

809,00 kr (647,20 kr)

Bestillingsvare, 7-9 dager til forsendelse

Mandag - Fredag:	9.00 - 16.30
Lørdag - Søndag:	Stengt

Telefon: +47 35060606	+47 35060606
E-post privatkunder:	[email protected]
E-post bedriftskunder:	[email protected]