Foto & Video - side 170

- Custom Designed for the Sony Burano 8K Digital Cinema Camera
- Mounting Points Include Arri Standard Rosettes, 1/4"-20 and 3/8"-16 Threads, Both with Locating Points
- Side Mounting Plate Provide Additional Mounting Options for Accessories like Wireless Video Transmitters
- 15mm Baseplate Supports 15mm LWS Rods and Accessories like Matte Boxes and Follow Focus Systems
- Top Plate Provides Mounting Options and Full Compatibility with Original Top Handle

This battery plate attaches to the bottom of the Float System’s post to allow you to provide external power to your gimbal with two gold mount batteries while also providing some counter weight to the bottom end of the post for when you are attempting to balance against the weight of your gimbal/camera setup.

*The plate itself does not have any power outputs*

The Hydra Alien Car Mounting System was designed from the ground up to be the perfect lightweight solution for car-mounted cinematography and this new Shock Absorbing Head takes that one step further.

This updated Shock Absorbing Head features an updated Soft Spring Module which is specifically designed to support lighter weight gimbals and cameras in underslung configurations.

The softer springs will not require as much weight to properly absorb vibrations which will lead to more stabile footage and greatly expand lightweight mounting options for the system.

We still recommend using additional counter weight on the Shock Absorbing Arm as it will perform better with heavier payloads.

NOTE: This Shock Absorbing Head is NOT recommended to use in upright configurations

This 19mm studio-compatible lens support prevents sagging of heavy lenses – which can cause misalignment of the image on the sensor – and twisting of lenses when using a strong follow focus motor. Simply mount the 19mm Pro Lens Support onto 19mm studio rods under the lens’ ⅜”-16 screw hole and secure the support screw to the lens.

This backing for the MB-T12 matte box allows you to clamp the matte box onto lenses within a given front diameter.

With the Puluz dual-channel charger, your camera will always be ready for action! The charger offers space to charge 2 batteries of the Insta360 X3 camera simultaneously. Each slot has an independent power source, which guarantees safe and reliable charging without worrying about overheating or overcharging. The built-in LED light indicator will let you know the charging status - a red LED indicates the charging process, and when the battery is ready for use, the LED turns blue.

Want to capture your moments while traveling on a motorcycle, scooter or bicycle? With the PULUZ mount it will be very easy! It is not compatible with any handlebars with a tube diameter of 1.5 to 5 cm, making it universal and very practical. What's more, it's made of the highest quality materials, so it's durable and reliable. Capture even more moments with PULUZ!

Create even more beautiful bird's-eye view shots. This set of filters designed for the DJI Mini 4 Pro drone will help you achieve the desired results! You will find MCUV, CPL, ND8, ND16, ND32, and ND64 filters in it. Each of them is made of high-quality optical glass that provides vivid colors and allows you to capture a clean, detail-rich image. They are also water-resistant, resistant to oily stains, and scratches - they will serve you well for a long time. They are also very easy to install and lightweight - don't worry that they will excessively burden your drone and affect flight stability. Convenient and safe storage of the filters is provided by the included box.

The PULUZ Metal Protective Adapter Frame is an essential accessory for any user of the Insta360 Ace Pro camera, providing maximum protection and convenience. It features a cold shoe mount, allowing you to freely connect an external light or microphone. All interfaces are easily accessible, ensuring full functionality of the camera.

Creating professional product photos has become easier than ever with the PULUZ shadowless tent. It's an indispensable tool for photography enthusiasts, enabling them to photograph small objects easily and efficiently. With built-in LED lighting and backgrounds in white and black, creating professional photos has never been so easy.

Give your Insta360 GO 3 camera the ultimate protection with the PULUZ metal cover. Made of high-quality aluminum alloy - it not only protects your equipment, but also increases the comfort of use, allowing you to record freely in almost any situation.

Provide your Insta360 X3 camera with reliable protection with the Puluz lens cover. Made of the highest quality tempered glass - it will protect the lens of your device from damage, while maintaining excellent image quality. At the same time, the accessory is very easy to install.

The Sunnylife Sunshield model OP3-ZG769 is an innovative accessory designed for DJI Osmo Pocket 3 users who want to maximize the quality of their video recordings, especially in intense sunlight. Made of soft rubber, it not only improves video quality, but also provides additional protection for your device.

Take care of the protection of your DJI OSMO Action 2 sports camera and equip yourself with the best quality tempered glass set. With 9H hardness and rounded edges, they reliably protect the display and lens of the camera from scratches and other mechanical damage. The glass does not affect the image quality, so you can enjoy sharp images and vivid colors. The glass is resistant to dust ingress, leaving greasy stains and fingerprints.

Ready for an underwater adventure? Meet the Sunnylife Dive Filter for DJI OSMO Action 3/4 camera in magenta. This indispensable accessory will allow you to discover the underwater world in all its glory. Dive up to 40 meters below the water's surface, and the rugged design provides a perfect seal, protecting your camera from water, shock and dust. Equipped with 306 stainless steel buttons, the filter is corrosion-resistant for long-lasting durability even in harsh marine environments. The filter is only compatible with the Sunnylife housing.

Give your DJI Osmo Pocket 3 camera the ultimate in protection and functionality with the PULUZ Metal Case. Made of high-quality aluminum alloy, this accessory offers solid protection and versatile expandability, ideal for professional content creators.

The PU642B Puluz is a unique selfie stick made of aluminum alloy that will delight any photography and filming enthusiast. It consists of 5 sections that, when fully extended, allow you to reach an impressive range of up to 300cm. This allows you to capture moments from an extremely wide perspective, allowing you to create unique and impressive shots.

Ensure the complete safety of your Insta360 X4 camera with the PULUZ silicone protective case. It is designed with durability, functionality and aesthetics in mind, while providing superior protection and convenience.

The PULUZ display board improves the quality of photos taken and makes it easier to achieve a professional effect. It will be perfect for photographing small objects. It was made of high-quality acrylic material, so it is scratch-resistant. Keeping it clean will not cause you any trouble.

Do you use Insta360 GO 3/ GO 3S to create amazing shots? Make your camera safe in any situation. The PULUZ magnetic security frame will help you do that. Made of the best materials, it is very durable and long-lasting. What's more, you will be able to attach it to various magnetic surfaces, creating stunning shots from different perspectives. See what PULUZ can offer you!

Protect your Insta360 Ace Pro camera from damage. This PULUZ case, made of high-quality plastic, is very durable. It effectively shields your device from impacts and more! The accessory fits perfectly with the shape of the Insta360 Ace Pro and does not hinder its operation – it does not cover buttons, ports, or the speaker, nor does it obstruct the use of the tilting screen. Moreover, the product is very lightweight, portable, and easy to install.

Discover new possibilities with the PULUZ expansion adapter for OSMO Pocket 3! Its versatile use means it can be used as a case, bike mount, camera mount for a chest strap and more. Made of high-quality ABS plastic, it is lightweight, durable and comfortable to use. With a built-in non-slip sponge pad, it prevents the camera from slipping, ensuring stability without damaging the device. It also does not block access to the remote control buttons, shooting buttons and charging interface.

Capture your next motorcycle adventure from an unusual perspective. The PULUZ mount allows you to securely attach an action camera to your helmet and create plenty of great shots. It's also ideal for live streaming. Made of durable materials, it is very sturdy and has a load capacity of up to 5 kg.

Want to protect your camera from damage? The PULUZ silicone case is sure to meet your expectations! The case effectively protects the device from scratches and minor mechanical damage, and also prevents dust and dirt from entering the device. It is perfectly fitted to the Action Pod of the Insta360 GO 3/GO 3S sports camera and does not restrict access to ports and buttons. It is made of flexible silicone, which is not only extremely durable, but also soft and pleasant to the touch.

The Sunnylife quick release mount for the Osmo Pocket 3 is ideal for professionals and filming enthusiasts who value quality, security and flexibility. Choose a mount that lets you make the most of every moment without worrying about the stability or durability of your equipment.