Foto & Video - side 284

Hama Lens Cap Smart protect the lens from scratches, dust and dirt.

Støttesystem, sugemontering, veggmontert, takmonterbar, bilvindu

Hawk-Woods 98Wh mini V-lok (v-mount) battery is the first to be added to the mini VL range.

The mini battery system offers all the features of the standard size V-Lok battery in what is to date the smallest V-Lok case. The perfect solution if you want long run times, but want to save on weight and space! The battery is that small, it will fit into the palm of your hand.

When used in conjunction with VL-MCF1, these batteries can be treated similar to a stack system, however without carrying dead weight, Mini VL can be switched and rotated for continuous power, whilst combining the wattage of 2 batteries.

These batteries will work on all existing fittings and chargers. Within the 100Wh bracket, this battery is flight safe for carry-on luggage, volumes are subject to the airline!

Lastly the battery has the benefit of 1x Power-Con output which will provide nominal battery voltage.

Specifications
Model:VL-M98
Type:V-Lok
Weight:500g
Size:7 x 10.3 x 4.5 cm
Nominal Voltage:14.4v
Wattage:98Wh
Capacity:6.8Ah
Current:8A
Number of D-Taps: 1

Ø: 25mm 3-section boom with tiltable llamp 123, Counterweight 023 clamps and locking screw. Weight: 1.4kg (boom only) Load: 3kg at 170cm with counterweight. Length folded: 71cm Maximum length: 200cm. This boom fits the shaft of most light stands

Professional video kit MVH502A, 546BK-1 Contains fluid video head (75mm half sphere) MVH502A and pro video stand with centre spreader.

- Transport height: 83 cm
- Number of leg sections: 3
- Material: Aluminium
- Max height: 164 cm
- Minimum height: 41 cm
- Snap-on plate: yes
- Max load: 10 kg
- Weight: 5,500 kg

Operating rod in 4 sections, 3 of which are adjustable. Diameter 28,24,20 and 16mm. Minimum extension 220cm. Max 650cm.

Sliding camera plate (180mm long) with metric ruler compatible with Manfrotto fluid video heads: MVH502AH, MVH502A, 504HD, 509HD, MVHN8AH and MVHN12AH.
Supplied with 1 x 1/4” camera screw, removable anti-rotation pin with 1 x 1/4” camera screw and 2 x 3/8” camera screws.

Skulderrem

Puluz PU5030 lysboks (fotografi) 6500 K

PolarPro Step Up Ring 72-77mm Filter Adapter
This practical adapter increases filter compatibility so you can use it with smaller lenses. This gives you even more options for recording original footage. For example, the Step Up Ring 72-77mm by PolarPro will allow you to mount a 77mm filter on a 72mm lens. The knurled brass frame makes the accessory easier to mount and more durable. What's more, the matte black electroplated surface eliminates unwanted reflections. All this makes the Step Up Ring perfect for recording both in the studio and outdoors.

Objektiv, 25 mm, f/1.4, Micro Four Thirds

Telefotozoomobjektiv, 70 mm, 200 mm, f/4.0 O.I.S., L-Mount, for Leica SL2, SL2-S; Leica CL; Panasonic Lumix DC-BS1H, S1, S1R, S1H, S5, S5M2, S5M2X; Sigma fp, fp L

Filter, UV, 46 mm

Puluz PU5120 softboks

Professional acrylic mat
The professional acrylic mat by PULUZ is a professional product that makes it easier and better to take photos with a perfectly black and clear background.

Show your product at its best
The mat is ideal for taking publicity photos, so that your products look perfect and your photos look professional.

Glossy texture
The mat has a glossy texture, which will give your product photos a mirror-like effect.

Included
Acrylic mat

82mm Step up-ring (filter)

Flashminnekort, 160 GB, CFexpress Type B

Watertight case for the Niceboy VEGA X PRO

Forøkningsring 62-mm gjenge, 82-mm gjenge

The Gold mount Tilta Power Supply System for Blackmagic Cinema Camera mounts quickly onto a 15mm LWS rod system and is designed to provide power to your cameras and other devices while on the go. The system features a Gold mount battery plate and outputs for 12V, 8V, and 5V coaxial as well as a 14.8V D-Tap port for powering your Blackmagic Cinema Camera or other 14.8 VDC gear.

The plate utilizes an adjustable 15mm LWS rod mount for easily attaching it to your rig and for adjusting it from flat to nearly upright. Included with the system is a 12V power cable, two 5V power cables, a 7.2V power cable, and a D-Tap to Blackmagic Cinema Camera dummy battery.

This 15mm LWS Baseplate adds 15mm rod support to your RED V-RAPTOR which allows you to utilize rod based accessories such as matte boxes and follow focus systems.

This baseplate natively connects to our Full Camera Cage for RED V-RAPTOR and features a quick release connection that allows you to easily detach your camera from this baseplate when needed.

The built in safety release pin helps lock the cage in place and provides additional security to ensure your camera stays securely connected to this baseplate.

Underneath this baseplate you’ll find a receiver that natively connects to our Tilta Standard Dovetails or ARRI Standard Dovetails via our optional Tilta Standard to Arri Standard Multi-Functional Baseplate.

This baseplate can also mount to third party quick release plates via 1/4″-20 and 3/8″-16 threads.

This Front Top Plate for the RED V-RAPTOR offers expanded options for mounting accessories in a small, lightweight form factor.

The plate includes a Cold Shoe Receiver, 1/4″-20 and ⅜”-16 mounting points which support various accessories such as our older quick release top handles, external monitors, wireless video transmitters, articulating arms, etc.

This Accessory Mounting Bracket is the ultimate lightweight mounting bracket for attaching accessories to your camera system.

This adjustable bracket can rotate 360 degrees and can tilt 175 degrees which is ideal for connecting external monitors or wireless video transmitters.

This can support up to 2kg of weight and features an adjustable locking knob in order to securely lock the accessory in place which is especially useful when using heavier accessories.

The Tilta Adjustable Accessory Mounting Plate is a new versatile solution for flexible and secure accessory mounting. This accessory plate offers a wide range of mounting options and adjustable configurations to meet a variety of needs.

The plate connects via a swiveling 1/4″-20 mount which utilizes locating pins to prevent rotation. The position of this mount can then be adjusted via a NATO Rail connection which uses safety pins on both ends for increased security.

The main mounting plate features multiple 1/4″-20 and 3/8″-16 threads, with locating points, which provides an array of options to accommodate different accessories.

This accessory can be used in lieu of a cage or can expand the mounting points of a cage, allowing you to easily secure articulating arms, external monitors, wireless video transmitters and more to your camera, all while providing the flexibility to quickly swivel the entire mounting place when needed.

This Advanced I/O Module utilizes an integrated V-RAPTOR EXT Cable that expands communication with the camera body and offers increased functionality for Run Stop and Timecode via additional ports.

This Module can be mounted in a few different locations on the V-Raptor’s Camera Cage including the Top Handle, Top Plate, Bottom Mounting Plate or the integrated slot on the Battery Plate which can power and support the module.

When mounting the module in different locations other than the Battery Plate, the module can be powered via a 2 Pin Lemo input.

This allows this module to be incredibly versatile in terms of where and how it can be mounted to accommodate almost any camera build.

This Module includes a 3 Pin Fischer R/S port which allows users to trigger Run Stop and power a Nucleus M with a single cable via an optional 3 Pin Fischer Run Stop Cable.