Foto & Video - side 291

Magic Carpet Rails are available in 3 lengths. If you already own a Magic Carpet, you can add another length to your kit and use the same end caps and carriage from your current setup.

Magic Carpet Rails are available in 3 lengths. If you already own a Magic Carpet, you can add another length to your kit and use the same end caps and carriage from your current setup.

- Includes a top plate with a shoe mount
- Four rosette mounts
- 1/4"-20 and 3/8"-16 accessory threads
- Multiple 1/4"-20 mounting threads for optimal balancing on gimbals
- Proprietary adapter plate included for attaching to the optional Tilta 15mm LWS Baseplate for RED KOMODO Cage by quick release

Add an extra 0.6m extension to your Magic Carpet Carbon fibre track for extended tracking shots. Requires Magic Carpet End Caps and Carriage and Carbon Fibre Track.

This camera cage provides complete protective armor for the Z CAM E2, E2C, E2G camera bodies. It provides several 1/4”-20 and 3/8”-16 mounting points as well as two Arri rosette mounting points and one cold shoe mounting point. The base of the cage also provides several mounting holes when attaching your camera to gimbals to more easily fine tune the balance of your setup.

A variety of different baseplates can be attached to the bottom of the cage, allowing for various rod mounting and optional power supply configurations.

The quick release top handle and various optional side handles can be attached to the cage to provide for different ways to comfortably operate your camera setup.

The Magic Carpet End Caps and Carriage, are an interchangeable accessory used with either the standard Syrp Magic Carpet or the Magic Carpet Carbon Fibre.

This Tiltaing Wooden Handle from Tilta is a contoured handle designed to mount onto the right side of your Tiltaing camera cage. Made with a comfortable wooden grip, this legacy handle requires a separately available adapter to mount onto your cage.

Note: Requires a separately available handle adapter to attach to your cage.

The Syrp Ballhead is lightweight and a perfect match for DSLRs and mirror-less cameras. Complete with bubble levels, quick release knobs & a quick release plate, the Syrp Ballhead is your perfect Genie companion.

The perfect accessory for adding dynamic motion for time-lapse and filmmaking. The Genie Mini Pan Tilt Bracket provides everything you need to connect two Genie Minis together for creating smooth Pan Tilt time-lapse, Video and Panoramas. In addition, combine with the Genie or Genie II Linear for 3 axis control.

Designed for Tiltaing camera cages, the Right-Side Advanced Focus Handle, allows you to connect to the optional Nucleus Nano motor to control focus via a built-in finger wheel. It also features a record button for triggering record on/off over an optional Tilta R/S cable connection to compatible cameras. Multiple R/S cables are available, depending on your camera.

The handle attaches to the right side of your Tiltaing cage using your choice of an optional dedicated Right Side Handle Adapter—the Type IV, V, or VI version. Each of these attachment adapters use a different mount type, such as rosette or NATA rail.

The handle accepts a Sony F570 battery, sold separately. An included USB cable connects the handle to your Nucleus Nano motor to power it off the F570 battery and to allow finger-wheel focus control.

There are two connections on the handle: an 8V regulated USB Type-C output (where the USB cable plugs in) and 12 VDC output.

Extend the distance of your camera from the Genie mini with a 3m Shutter Link Extension Cable. Ideal for Product Turntable photography.

Works with all Syrp Shutter Link cables and is not specific to camera models

This Tiltaing Wooden Handle from Tilta is a contoured handle designed to mount onto the left side of your Tiltaing camera cage. Made with a comfortable wooden grip, this legacy handle requires a separately available adapter to mount onto your cage.

The Syrp link cable connects the Genie with your camera allowing the Genie to control your camera’s shutter. This is a required accessory to shot photos for Time-lapse and photo stitching. It is not required for video recording with the Genie.

Every camera model uses a specific Shutter Link Cable and we offer cables to support hundreds of different cameras.

The Syrp IR Mixed Link Cable for Syrp Genie is designed to connect your camera to the Syrp Genie for making real-time motion control and time lapse videos. It enables camera control with cameras that do not accept an external cable input for shutter release. The 1 foot long cable connects to the interface port of your Genie, and then you position the flexible cable so that the emitter is aimed at your camera's IR receiver. As long as your camera allows you to trigger the shutter release via IR, this cable allows your camera to be triggered by the Genie.

The Syrp link cable connects the Genie with your camera allowing the Genie to control your camera’s shutter. This is a required accessory to shot photos for Time-lapse and photo stitching. It is not required for video recording with the Genie.

Every camera model uses a specific Shutter Link Cable and we offer cables to support hundreds of different cameras.

The Syrp link cable connects the Genie with your camera allowing the Genie to control your camera’s shutter. This is a required accessory to shot photos for Time-lapse and photo stitching. It is not required for video recording with the Genie.

Every camera model uses a specific Shutter Link Cable and we offer cables to support hundreds of different cameras.

The Syrp link cable connects the Genie with your camera allowing the Genie to control your camera’s shutter. This is a required accessory to shot photos for Time-lapse and photo stitching. It is not required for video recording with the Genie.

Every camera model uses a specific Shutter Link Cable and we offer cables to support hundreds of different cameras.

The Syrp link cable connects the Genie with your camera allowing the Genie to control your camera’s shutter. This is a required accessory to shot photos for Time-lapse and photo stitching. It is not required for video recording with the Genie.

Every camera model uses a specific Shutter Link Cable and we offer cables to support hundreds of different cameras.

The Syrp link cable connects the Genie with your camera allowing the Genie to control your camera’s shutter. This is a required accessory to shot photos for Time-lapse and photo stitching. It is not required for video recording with the Genie.

Every camera model uses a specific Shutter Link Cable and we offer cables to support hundreds of different cameras.

- 8-Input 12G-SDI UHD 4K60 Live Switcher
- Redesigned Buttons and Layout
- Streaming Support, USB & M.2 Recording
- Blackmagic Cloud Integration
- Webcam Support, Runs Blackmagic OS
- 12G-SDI & HDMI Multiview Outputs
- Audio Mixing, Transitions, T-Bar, AUX
- Customizable Electronic LCDs
- Studio Camera Control
- Timecode, MADI, Talkback

- 8-Channel 3G-SDI Live Streaming Switcher
- Supports up to 1080p60
- RTMP Streaming via Ethernet or USB-C
- Record Program Out and Individual Inputs
- 11-Input, 2-Channel Audio Mixer

Minitripod / selfiepinne

For rear car cameras
Size 29.5 x 18.5 mm

These cables for the Nucleus-M give you run/stop capabilities in camera systems that support it. Simply plug the 7-pin end of the cable into one of the motors and the other end into the R/S port of the camera.

Note that this cable was specifically designed for the Nucleus-M so the R/S function only works with the Nucleus-M’s own hand unit and hand grips.

Weight: 0.09lbs
Length: 68.6cm
Color: Black
Materials: Copper, rubber, aluminum-alloy

These cables for the Nucleus-M give you run/stop capabilities in camera systems that support it. Simply plug the 7-pin end of the cable into one of the motors and the other end into the R/S port of the camera.

Note that this cable was specifically designed for the Nucleus-M so the R/S function only works with the Nucleus-M’s own hand unit and hand grips.

Weight: 0.09lbs
Length: 68.6cm
Color: Black
Materials: Copper, rubber, aluminum-alloy