Tilta Foto- & Videotilbehør - side 23

The Illusion Filters are the new, in house manufactured set of filters specifically designed for the Circular 95mm Standard of the Mirage Matte Box.

This filter is a type of diffusion filter that reduces contrast and produces a subtle glow around light sources, while limiting overall softness and retaining contrast in the shadows.

This creates a soft visual atmosphere while still retaining sharpness and more detail in the shadows than a standard Mist filter.

This filter is ideal for users who are looking for a classic diffused look without being overly distracting.

The Illusion Filters are the new, in house manufactured set of filters specifically designed for the Circular 95mm Standard of the Mirage Matte Box.

This filter is a type of diffusion filter that subtly reduces contrast and helps mitigate the ultra-sharpness associated with modern digital cameras while still retaining as much detail as possible.

This filter helps create a film like visual atmosphere and more flattering skin tones without causing excessive blooming of highlights.

When compared to the standard Digital Diffusion Filter, this filter renders more sharpness while retaining some subtle elements of more pronounced diffusion filters.

The Illusion Filters are the new, in house manufactured set of filters specifically designed for the Circular 95mm Standard of the Mirage Matte Box.

This filter is a type of diffusion filter that subtly reduces contrast and helps mitigate the ultra-sharpness associated with modern digital cameras.

This filter helps create a film like visual atmosphere and more flattering skin tones without causing excessive blooming of highlights.

This filter is ideal for users who are looking to take the digital edge off of overly sharp modern cameras.

The Illusion Filters are the new, in house manufactured set of filters specifically designed for the Circular 95mm Standard of the Mirage Matte Box.

This filter is available in various levels of Neutral Density, providing users greater control over their exposure.

This allows users to reduce light visible to the sensor, allowing you to open up your aperture when shooting in brighter lighting environments like daylight.

Full Spectrum ND Filters evenly reduce all wavelengths of light including visible light, ultra violet, and infra-red.

This Power Supply Module is the perfect mounting and power solution for the DJI Video Transmitter or Receiver.

The front and back plates of the module can be installed on both sides of the video transmission units.

The front side of the module allows you to mount your DJI Video Transmitter or Receiver to a Gold/V-Mount Battery Plate on your camera system.

The back side then allows you to mount a Gold or V-Mount battery to the unit which can provide power as well as pass power through the module to the camera body or wireless monitor.

This is a fantastic option for those who are looking for a clean and convenient way to mount and power the DJI Transmission System.

NOTE: These Plate can only mount to the transmitter in one configuration which will position the SDI ports on the Operators side and the LCD Screen/Control Knob on the Assistant’s side.

Mount your phone onto your DJI RS 3 or other DJI gimbal with this black Arca-Type Phone Mounting Bracket from Tilta. The durable aluminum bracket is designed to mount your smartphone directly onto your DJI gimbal that has an Arca-type receiver, such as the RS 3. It's height-adjustable to support most smartphone widths, and it provides tension-based tilt adjustment to let you set your phone to the desired angle on the fly without having to tighten any knobs.

The Tilta Engine Button Cover is a decorative attachment for your vehicle’s Push-to-Start Button, designed for Hydra Car Mount enthusiasts.

This accessory features a unique design that allows users to close a mechanical shutter, which prevents access to the vehicle’s engine button when needed.

The Tilta Engine Button Cover is compatible with a wide range of vehicles that feature a Push-to-Start Button

The Tilta Engine Button Cover is a decorative attachment for your vehicle’s Push-to-Start Button, designed for Hydra Car Mount enthusiasts.

This accessory features a unique design that allows users to close a mechanical shutter, which prevents access to the vehicle’s engine button when needed.

The Tilta Engine Button Cover is compatible with a wide range of vehicles that feature a Push-to-Start Button

Tilta TT-FG002 (TTFG002) Marking Disks for FF-T03 Single Sided DSLR Follow Focus. Product image may differ from This follow focus marking disk attaches to the hand wheel of the FF-T03 Tilta Follow Focus and allows you to create drawn-on custom marks for accurate focus pulls.

This sleek, rugged Arri standard dovetail allows you to mount your camera rig easily and comfortably using any compatible Arri standard baseplate. Baseplate stopper toggles are on either end so that you can slide your camera onto the plate however you’d like.

These hand grip extension arms have angled Arri Standard Rosettes that allow you to create more space and comfort while operating on one of the various Tilta shoulder mount systems.

This 15mm LWS Baseplate adds 15mm rod support to your RED V-RAPTOR which allows you to utilize rod based accessories such as matte boxes and follow focus systems.

This baseplate natively connects to our Full Camera Cage for RED V-RAPTOR and features a quick release connection that allows you to easily detach your camera from this baseplate when needed.

The built in safety release pin helps lock the cage in place and provides additional security to ensure your camera stays securely connected to this baseplate.

Underneath this baseplate you’ll find a receiver that natively connects to our Tilta Standard Dovetails or ARRI Standard Dovetails via our optional Tilta Standard to Arri Standard Multi-Functional Baseplate.

This baseplate can also mount to third party quick release plates via 1/4″-20 and 3/8″-16 threads.

This lens adapter support attaches to the Full Camera Cage for the Sony FX9 and FX6.

It improves the flexibility of the cages’ existing support system and allows you to easily secure various lens adapters.

This Adapter is specifically useful for securing the Sony E Mount to Canon EF Mount Lens Adapter.

Tilta TGA-TMC kameramonteringstilbehør Monteringsklemme

- Includes a top plate with a shoe mount
- Four rosette mounts
- 1/4"-20 and 3/8"-16 accessory threads
- Multiple 1/4"-20 mounting threads for optimal balancing on gimbals
- Proprietary adapter plate included for attaching to the optional Tilta 15mm LWS Baseplate for RED KOMODO Cage by quick release

- Includes a top plate with a shoe mount
- Four rosette mounts
- 1/4"-20 and 3/8"-16 accessory threads
- Multiple 1/4"-20 mounting threads for optimal balancing on gimbals
- Proprietary adapter plate included for attaching to the optional Tilta 15mm LWS Baseplate for RED KOMODO Cage by quick release

This camera cage provides complete protective armor for the Z CAM E2, E2C, E2G camera bodies. It provides several 1/4”-20 and 3/8”-16 mounting points as well as two Arri rosette mounting points and one cold shoe mounting point. The base of the cage also provides several mounting holes when attaching your camera to gimbals to more easily fine tune the balance of your setup.

A variety of different baseplates can be attached to the bottom of the cage, allowing for various rod mounting and optional power supply configurations.

The quick release top handle and various optional side handles can be attached to the cage to provide for different ways to comfortably operate your camera setup.

These cables for the Nucleus-M give you run/stop capabilities in camera systems that support it. Simply plug the 7-pin end of the cable into one of the motors and the other end into the R/S port of the camera.

Note that this cable was specifically designed for the Nucleus-M so the R/S function only works with the Nucleus-M’s own hand unit and hand grips.

Weight: 0.09lbs
Length: 68.6cm
Color: Black
Materials: Copper, rubber, aluminum-alloy

This versatile camera cage is designed for the Sony a6 series of cameras (a6000, a6300, a6500). It provides a high quality aluminum, CNC-milled protective armor for your camera that has several ¼”-20 and ⅜”-16 mounting points for attaching accessories. It’s designed to fit around the camera’s hot shoe mount as well as the battery and side input/output compartments.

A detachable top handle is included and features a cold-shoe mounting point (an additional cold shoe mount is on the top of the cage itself). This handle easily slides on and off of a small NATO rail that’s attached to the top of the cage.

On the bottom of the cage is a fan system with an on/off switch to help cool your camera if needed. Underneath the cooling system is a quick release plate that mounts to a 15mm LWS baseplate. This baseplate allows you to attach various accessories via 15mm rods and can mount to a Tilta Standard Lightweight Dovetail Plate to allow you to easily slide on and off of an operating setup. The baseplate also has a lens adapter support bracket built in to allow a way to mount various lens adapters (support screws for Metabones EF and PL mount adapters are included).

An optional right-side wooden handle can be added to your order. This handle is beautifully hand-carved from solid wood and features a very ergonomic design. It includes a recording run/stop button built in as well as a R/S cable of your choice. The wooden handle is attached via an Arri Standard Rosette connection on the right side of the camera.

Tilta TA-T23-B kamerautstyr