Gulvvarme - side 4

Danfoss gulvvarmefordelerskap FHF-6. Danfoss gulvvarmefordelerskap, type FHF, brukes for varmeregulering i gulvvarmesystemer. Både frem- og returfordeler har 1" tilkoblinger, med tilkoblinger for mellom 2 og 12 varmekretser. Fordeleren

Gulvvarmeventil for RA 2000-sensorer. FHV-A selvregulerende gulvvarmeventil gir temperaturkontroll av gulvvarmekretser ved bruk av RA 2000 romtermostater. Ventilen er utstyrt med forhåndsinnstilling. Ventilen er designet for å bygges inn i en solid eller skillevegg, slik at bare den runde frontdekselet og sensoren er synlig i den endelige installasjonen. Ventilen passer til kompresjonsbeslag og leveres med innebygd luftutløp.

Uponor Smatrix Base PRO kontroller X-147 Bus beskyttelsesklasse: Klasse II IP20 farge: grå RAL7015Består av: Uponor Smatrix Base PRO kontroller X-147 Bus 6X hurtigguide, sikkerhetsinstruksjoner micro SD-kort (forhåndsinnstilt) DIN-skinne (lengde: 37 cm) monteringsmateriale

Den roterende knott-termostaten er en kostnadseffektiv romtermostat med enkel betjening og med alle de avanserte funksjonene til Danfoss Icon gulvvarmesystem. Trådløs, 3 års batterilevetid, alternativ for begrensning av temperaturinnstillingsområde, 2 stk. AA-batterier.

Danfoss Icon Master Controller 24V with 10 channels. Underfloor heating control for the Danfoss Icon series with 10 outputs for thermal actuators. Up to 10 room thermostats, wireless/wired, can be registered. The Master Controller must be combined with the Danfoss Icon radio module if wireless room thermostats are to be registered. Automatic balancing, active pump relay, function test and potential-free boiler relay are standard. It is possible to purchase the Danfoss Icon app-module which provides access to app-control of the underfloor heating system via an iOS or Android device. The app-module also provides access to online updating of the Master Controller firmware (OTA). Cooling control and demand-controlled flow temperature can be purchased using the Danfoss Icon expansion module. The Master Controller is compatible with Zigbee 3.0 systems such as Danfoss Ally or 3rd party Zigbee systems. For Zigbee integration, the Danfoss Icon Zigbee module is used, which is connected to the Master Controller's app input.

Uponor Smatrix Wave relemodul M-161

Trådløs romsensor med integrert måling av relativ fuktighet.

Danfoss 088U2122 termostat ZigBee Hvit

SALUS GVM-F underfloor heating manifold is a high flow manifold with manual balancing of each circuit.Each zone valve has on the flow pipe a flow meter that can be used for balancing. Alternatively, the built-in manual flow control integrated into the return valve on the return pipe can be used for balancing. Instructions on how to balance the circuit can be found in the distributor box.SALUS GVM-F underfloor heating distributor has a manual vent on each pipe and a drain valve with 1/2 ”thread for hose. Inlet and return pipe connection is 1 ”thread, and the actuator thread is 30 x 1.5 mmContains:Stainless steel manifold set with flow meterEuroconus set for 20 mm PEXVentilation valve on inlet and returnSwivel filling and drain valveMounting brackets for wall mountingWith individual room temperature control. SALUS GVM-F benefits are available with SALUS - wireless control.Properties:Available with SALUS insulation in form-stable EPPComplies with the installation requirements for insulation standard DS 452.Ready for wall mounting.Can be used with water / glycol mixtures with a mixing ratio of up to 30%.Euroconus are included for all inlets and outlets for 20 mm PEX / PE-RT pipe.• Can be integrated into the SALUS Smart Home solution.Can be operated directly from the room thermostat or from the mobile phone, tablet or computer.Benefits are made of stainless steel alloy AISI304 L Premium quality and extruded in dimension1 ”, for optimal distribution and minimum pressure drop.Maximum working pressure: 6 BarMaximum test pressure: 10 bar

Prosjektaktuator - 2 watt. Med adapter og klikkmontering for Pettinaroli distribusjonssystemer. 100% vanntett i alle monteringsretninger. Normal-lukket (NC) funksjon.

Advanced model, 230V, 15 circuits. The Advanced model allows for floor cooling as well as control of supply temperature etc. Installation, adjustment and handover take place easily with the Danfoss Icon2™ Commissioning App.

IS7037 isolasjonsboksen kan brukes til Pettinarolis 1 gulvvarmefordeler og 3/4 KVIKSHUNT. Boksen er laget av EPP med lukket cellestruktur. Isolasjonsboksen har dimensjoner på 155x545x530 mm (dxbxh) og kan inneholde 2 til 5 kretser. Fordelingssystemer over 5 kretser må isoleres med IS7035 isolasjonsplater

Rett radiatorventil 12, med termostatisk alternativ. Hunngjenge. Nikkelbelagt. Med forhåndsinnstilt enhet.

Danfoss kompresjonskoblinger for RA-N 15, RA-FN 15, RA-U/UN 15, RA 15/6T, RA 15/6TB, RTD 15 og RLV 15

Quantum SQ610 is a new smart room thermostat from SALUS. The room thermostat look is light and simple in a smart thin design. The room thermostat must be connected to 230V. The SQ610 can be used freely for either wired systems or connected wirelessly to a SALUS floor heating system / SALUS Smart Home system. When connected through SALUS Smart Home it is possible to monitor and change the thermostat settings from either PC, Smart Phone or tablet. The SALUS Quantum SQ610 offers the opportunity to increase comfort and reduce energy consumption.

Salus under floor heating system paired and ready for use - 4 zones.

Isolasjon for Danfoss manifold FHF og FH-ME

Pump with 6 m lifting height and dimensions 180 mm.The pump is A + rated, that is, power consumption is minimal.

Danfos Link HC master regulator 10. Wireless temperature control – all around the house. Danfoss Link is intelligent and wireless communication technology on the inside and stylish on the outside with its timeless design. For total control of your ind

Danfoss A/S, 082F1071

SALUS GVM-F underfloor heating manifold is a high flow manifold with manual balancing of each circuit.Each zone valve has on the flow pipe a flow meter that can be used for balancing. Alternatively, the built-in manual flow control integrated into the return valve on the return pipe can be used for balancing. Instructions on how to balance the circuit can be found in the distributor box.SALUS GVM-F underfloor heating distributor has a manual vent on each pipe and a drain valve with 1/2 ”thread for hose. Inlet and return pipe connection is 1 ”thread, and the actuator thread is 30 x 1.5 mmContains:Stainless steel manifold set with flow meterEuroconus set for 20 mm PEXVentilation valve on inlet and returnSwivel filling and drain valveMounting brackets for wall mountingWith individual room temperature control. SALUS GVM-F benefits are available with SALUS - wireless control.Properties:Available with SALUS insulation in form-stable EPPComplies with the installation requirements for insulation standard DS 452.Ready for wall mounting.Can be used with water / glycol mixtures with a mixing ratio of up to 30%.Euroconus are included for all inlets and outlets for 20 mm PEX / PE-RT pipe.• Can be integrated into the SALUS Smart Home solution.Can be operated directly from the room thermostat or from the mobile phone, tablet or computer.Benefits are made of stainless steel alloy AISI304 L Premium quality and extruded in dimension1 ”, for optimal distribution and minimum pressure drop.Maximum working pressure: 6 BarMaximum test pressure: 10 bar

Danfoss 088H3120 VVS-kobling

230V Wireless 4-zone expansion box for Salus iT600 Underfloor heating system.

Trådløs romtermostat i svart med display med integrert måling av relativ fuktighet.

SALUS GVM-F underfloor heating manifold is a high flow manifold with manual balancing of each circuit.Each zone valve has on the flow pipe a flow meter that can be used for balancing. Alternatively, the built-in manual flow control integrated into the return valve on the return pipe can be used for balancing. Instructions on how to balance the circuit can be found in the distributor box.SALUS GVM-F underfloor heating distributor has a manual vent on each pipe and a drain valve with 1/2 ”thread for hose. Inlet and return pipe connection is 1 ”thread, and the actuator thread is 30 x 1.5 mmContains:Stainless steel manifold set with flow meterEuroconus set for 20 mm PEXVentilation valve on inlet and returnSwivel filling and drain valveMounting brackets for wall mountingWith individual room temperature control. SALUS GVM-F benefits are available with SALUS - wireless control.Properties:Available with SALUS insulation in form-stable EPPComplies with the installation requirements for insulation standard DS 452.Ready for wall mounting.Can be used with water / glycol mixtures with a mixing ratio of up to 30%.Euroconus are included for all inlets and outlets for 20 mm PEX / PE-RT pipe.• Can be integrated into the SALUS Smart Home solution.Can be operated directly from the room thermostat or from the mobile phone, tablet or computer.Benefits are made of stainless steel alloy AISI304 L Premium quality and extruded in dimension1 ”, for optimal distribution and minimum pressure drop.Maximum working pressure: 6 BarMaximum test pressure: 10 bar