D-LINE Kabelordner/Kabelstrømpe

The D-Line light duty floor cable cover reduces the amount of trailing cables that you have in your office, preventing accidents and keeping your office organised. Black in colour, it suits every office without making it look untidy. The inner channel of this cover measures 14x8mm, suitable for a range of common cables.

D-Line Cable Tidy Units provide the most popular solution to contain extension sockets and cable spaghetti. The smart tech design blends with modern surroundings. 3x rear cable entry/exit slots enable cables to be routed to left-side, right-side or vertical.

Fully safety tested, and produced from electrically-safe robust ABS material with an effective click-lock lid, these Socket Enclosures sort unsightly cables and contribute to a positive Health & Safety culture.

Use Cable Tidy Bases to keep cables handy and in-reach, saving any need to pick-up fallen cables!

Simply peel and stick to adhere Bases to clean & smooth surfaces. They can hold in place cables, or other essentials up to 8mm diameter.

Kabelstyringsrør, 1.1 m, svart

Half circle 22 x 22mm profile covers expansion gaps between floors and skirting, while providing an easy-to-use cable duct around floor perimeters. The 22 x 22mm (W x H) dimensions scale well to blend with popular skirting boards, while providing capacity for cable bending radii around corners.

Traditional floor trim is usually nailed, and requires perfect measuring of lengths before corners can be mitre-cut at 45º angles. By contrast D-Line half circle can simply peel-and-stick to skirting, while the Clip-Over corner-bends save any need for precise measuring and can cover oblique cuts.

Compared to regular floor trim, D-Line features combine to enable approximately 50% quicker installations – and then it’s easy to add or remove cables!

The Kit consist of:
3x22x22mm Cable duct
1x Internal Bend Join lengths around 90 degree inside corners
1x External Bend Join lengths around 90 degree outside corners
2x Coupler Join 2 lengths of same profile on flat surface
2x Cable outlets
2x End Cap Neatly finish open ends

Couplings for D-Line cable ducts in semi-circular design, with a fine Oak Finish

Angled joint connectors for D-Line semi-circular cable ducts, set of four parts.

2x Flat Bend: Change direction by 90 degrees on flat surfaces
2x Internal Bend: Join lengths around 90 degree inside corners
2x External Bend: Join lengths around 90 degree outside corners
2x Equal Tee: Use to join 3 lengths of same profile
3x Coupler: Join 2 lengths of same profile on flat surface
2x End Cap: Neatly finish open ends

2x Internal Bend: Join lengths around 90 degree inside corners
2x External Bend: Join lengths around 90 degree outside corners
2x Cable In/Outlet: Takes cables in or out of a trunking. Use between lengths on straight runs.
1x Coupler: Join 2 lengths of same profile on flat surface
2x End Cap: Neatly finish open ends

Square-circular joints and ends for 22x22 mm cable duct

3 pcs connectors to D-Line cable ducts in size 50 x 25 mm. Lets you hide your cables in an elegant way.

1x Flat Bend: Change direction by 90 degrees on flat surfaces
2x Internal Bend: Join lengths around 90 degree inside corners
2x External Bend: Join lengths around 90 degree outside corners
2x Cable In/Outlet: Takes cables in or out of a trunking. Use between lengths on straight runs.
1x Coupler: Join 2 lengths of same profile on flat surface
2x End Cap: Neatly finish open ends

2x Flat Bend: Change direction by 90 degrees on flat surfaces
2x Internal Bend: Join lengths around 90 degree inside corners
2x External Bend: Join lengths around 90 degree outside corners
2x Equal Tee: Use to join 3 lengths of same profile
3x Coupler: Join 2 lengths of same profile on flat surface
2x End Cap: Neatly finish open ends

Angled joint connectors for D-Line semi-circular cable ducts, set of four parts.

D-Line Cable Tidy Units provide the most popular solution to contain extension sockets and cable spaghetti. The smart tech design blends with modern surroundings. 3x rear cable entry/exit slots enable cables to be routed to left-side, right-side or vertical.

Fully safety tested, and produced from electrically-safe robust ABS material with an effective click-lock lid, these Socket Enclosures sort unsightly cables and contribute to a positive Health & Safety culture.

D-Line Cable Tidy Units provide the most popular solution to contain extension sockets and cable spaghetti. The smart tech design blends with modern surroundings. 3x rear cable entry/exit slots enable cables to be routed to left-side, right-side or vertical.

Fully safety tested, and produced from electrically-safe robust ABS material with an effective click-lock lid, these Socket Enclosures sort unsightly cables and contribute to a positive Health & Safety culture.

D-Line Outdoor Cable Box has been extensively tested to safely contain extension blocks and excess cable outdoors. IP54 rating provides dust and weather resistance. D-Line protective box to fix and protect your cables against dirt and moisture. Perfect for work in the garden, the garage and for Christmas tree lighting and more. Closed box is protected according to IP54 classification. The protective box must not be buried or covered with water. Fits power outlets up to 270 mm in length. Internal dimensions = 290mm (L) x 125mm (W) x 110mm (H).

Angled joint connectors for D-Line semi-circular cable ducts, set of four parts.

8 pcs D-Line connections for cable ducts in oak colour. Lets you hide your cables in an elegant way. Custom size 22 x 22 mm.

Couplings for D-Line cable shells in semi-circular design in a nice black finish.

The D-Line 50 x 25mm Maxi is a versatile cable managment solution, providing capacity for several cables. The size and the capacity makes this profile a market-leading solution that is ideal for many AV, antenna and wall mounted TV projects.

Unique stylish ‘D-Line’ appearance
Saves channelling walls
Patented hinge &, click-lock lid
Self-adhesive
Paintable
Can be shortened arbitrarily
A smart alternative to traditional offers
No sharp edges, gentle on impact
Fully safety tested and certified to BS EN 50085-1:2005
Color: white

1x Flat Bend: Change direction by 90 degrees on flat surfaces
2x Internal Bend: Join lengths around 90 degree inside corners
2x External Bend: Join lengths around 90 degree outside corners
2x Cable In/Outlet: Takes cables in or out of a trunking. Use between lengths on straight runs.
1x Coupler: Join 2 lengths of same profile on flat surface
2x End Cap: Neatly finish open ends

1x Flat Bend: Change direction by 90 degrees on flat surfaces
2x Internal Bend: Join lengths around 90 degree inside corners
2x External Bend: Join lengths around 90 degree outside corners
2x Cable In/Outlet: Takes cables in or out of a trunking. Use between lengths on straight runs.
1x Coupler: Join 2 lengths of same profile on flat surface
2x End Cap: Neatly finish open ends

Splitter connector for D-Line cable collector quartz circle shaped, seen in four parts.

Angled joint connectors for D-Line semi-circular cable ducts, set of four parts.