AprintaPro Cleaing Needles 0.3x70mm 5pcs
The sharp flexible needle makes loosen clogged residue easy and effortless. The all-metal quality build was specially chosen to withstand the heat of the nozzle and to be safe from melting plastic.
Needle Method
To remove a clog with the needle method an acupuncture or hypodermic needle is required. The size of the needle needs to be small enough to fit the nozzle. For a standard diameter of 0.4mm, the 0.3mm needle works perfect.
Preheat the nozzle to the regular printing temperature for the material last in use. Be careful, the nozzle is hot and the all-metal construction of the needle conducts heat well.
The goal is to break the blockage and clear the nozzle. Insert the needle from below and carefully move it around. Then remove the needle and insert filament manually from above and & push through.
If the blockage is not yet clear repeat the steps. If this method does not work an alternative is the cold pull method.
Ovenstående informasjon/spesifikasjoner er veiledende og kan uten varsel bli endret av produsenten. Det tas forbehold om trykkfeil og illustrerende bilder. Enkelte tekster kan være autogenerert eller maskinoversatt, så derfor kan det forekomme tekster som virker misvisende.