Profort

multiGuard® DIN6 is a flexible monitoring / control of technical installations in industry, agriculture and private homes such as pumping stations, irrigation, heating controls, ventilation, burglar alarm aso. The alarms are transmitted via the GSM 2G, 3G and 4G network.multiGuard® DIN6 can send the alarms via email, SMS and DTMF signals on a change of an input. The carrier medium for all communication modes are 2 and 3G network. Therefore, it is also important that telecom provider can support the selected communication channels.Programming / setup of multiGuard® DIN6 happens most easily from www.setup.masterview.dk or via PC, but can also be performed from the mobile phone. From landline or mobile phone, via DTMF tones or SMS messages, commands can be send to the multiGuard® DIN6 for activation or deactivation of outputs to control external devices such as pumps, sirens, lights, heating systems, cameras electricity. the like.multiGuard® DIN6 are prepared for battery backup and

GSM-enhet med 1 releutgang, 3 digitale + 1 analoge innganger, strømforsyning: 12-24V AC/DC. Innebygd antenne, ekstern mulig. Alarm kan sendes som SMS-melding og toneanrop (DTMF). SMS og DTMF kan aktivere releutgangen. Ekstrautstyr: (009010) 3,6 V reservebatteri for strømbruddsalarm.

Diskantenne for GSM, vandalbeskyttet med 2,5 kabel og SMA hannkontakt. 30x100 Ø mm

Ekstern GSM-antenne med 2,5 m kabel.

Antenne forlengerkabel 5 m.

Akatherm is the European leader in sewer and drainage systems in PEH. Over the past 40 years, several drainage systems from Akatherm been installed in prestigious buildings around the world, and is among the most reliable HDPE piping systems in the market. PEH is an abbreviation for polyethylene, as the system is made of. Besides pipes and piping components range includes also a number of connections for example. toilets, sinks and floor drains. HDPE has good sliding properties and wear resistance and is resistant to most aqueous solutions of salts, acids and bases. Akatherm has a complete range of pipes and fittings from 40 mm to 315 mm, and can be used for drainage and roof drainage. The tubes are heat-treated in production, which reduces the voltage stress and reduces shrinkage. Drain Pipe system can be assembled with elektromuffer and butt welding. Welded joints are strong and durable, and thus both tensile and compressive safe. Adapters can be supplied with spigot and socket and threaded assembly. Great impact resistance, temperature resistance and chemical resistance makes an HDPE drainage system particularly advantageous for use in installations such. industry, hospitals, hotels, schools.

Vanntett boks med DIN-skinne og 3 PG-kabelmuttere