Tilta - side 13

Tilta TA-LSR-500-B kameramonteringstilbehør

Tilta TGA-RG-V videostabilisatortilbehør Batteriplate Sort Aluminium, Rustfritt stål 1 stykker DJI Ronin RS 2

Tilta ES-T20-MTP kameramonteringstilbehør Topplate

Tilta MB-T16-B kameramonteringstilbehør

Tilta GSS-T04-DHB2 videostabilisatortilbehør Dobbelt håndtak Sort Aluminium, Nylon, Plast, Rustfritt stål 2 stykker DJI RS2, RS3 Pro, RSC2, RS3

Tilta Mini Articulating Arm Monterings arm

Tilta TGA-ARG kameramonteringstilbehør Håndgrep

Tilta RS-TA-GHS videostabilisatortilbehør Kontrollkabel Sort Kopper, Rustfritt stål 1 stykker Panasonic GH / S Series

- Retains access to the camera shoe mount, ports, battery, and display
- Multiple 1/4"-20 accessory threads
- 1/4"-20 camera mounting screw
- Removable Manfrotto-style plate fits Manfrotto-compatible baseplates
- 1/4"-20 mounting threads on the bottom for tripod mounting
- One integrated shoe mount
- Integrated single rod port for optional Tilta single-rod mount
- Aluminum and steel construction

This camera cage provides complete protective armor for the Fujifilm X-T3 and X-T4 cameras.

It provides several 1/4”-20 mounting points as well as two cold shoe mounting points.

The base of the cage also provides several mounting holes when attaching your camera to gimbals to more easily fine tune the balance of your setup.

A variety of different baseplates can be attached to the bottom of the cage, allowing for various rod mounting and optional power supply configurations.

The quick release top handle and various optional side handles can be attached to the cage to provide for different ways to comfortably operate your camera setup.

This kit of the Fujifilm X-T3/X-T4 cage includes: the base Fujifilm X-T3/X-T4 cage, quick release top handle, Arca and Manfrotto quick release baseplates, as well as a clamp to attach an HDMI cable comfortably to the cage (one specifically for the X-T3 and one for the X-T4).

Compatible with Type II Baseplates and Type I Side Handles.

Tilta MB-T15-67 camera filter tilbehør Filterholder-adapterring

This bracket attaches to the front of the Tiltaing Full Camera Cage for Sony a7C to provide support for a EF mount lens adapter.

Tilta TA-T01-FCC-B kamerabur 1/4, 3/8" Sort

Tilta TA-PBP-V kameramonteringstilbehør Batteriplate

Tilta TA-T18-FCC kamerabur 1/4" Grå

This camera cage provides protective armor for the RED Komodo camera. It provides several 1/4”-20 and 3/8”-16 mounting points for mounting accessories. It also includes two rosettes on each side as well as a cold shoe mount on top. The base of the cage also provides several mounting holes when attaching your camera to gimbals to more easily fine tune the balance of your setup.

A variety of different baseplates can be attached to the bottom of the cage, allowing for various rod mounting and optional power supply configurations.

The quick release top handle, adjustable quick release top handle, and various optional side handles can be attached to the cage to provide for different ways to comfortably operate your camera setup.

This kit of the RED Komodo camera cage will help to fully build out your setup. It includes: the base RED Komodo cage, right side wooden handle, quick release top handle, Arca and Manfrotto quick release baseplates, 15mm LWS baseplate, an Adjustable Cold Shoe Accessory Mounting Bracket, and finally a Dual Canon BP to V Mount Adapter Battery Plate to allow for a longer battery life for your camera.

This camera cage provides complete protective armor for the Panasonic GH4, GH5, and GH5S cameras. It provides several 1/4”-20 and 3/8”-16 mounting points as well as two cold shoe mounting points. The base of the cage also provides several mounting holes when attaching your camera to gimbals to more easily fine tune the balance of your setup.

A variety of different baseplates can be attached to the bottom of the cage, allowing for various rod mounting and optional power supply configurations.

The quick release top handle and various optional side handles can be attached to the cage to provide for different ways to comfortably operate your camera setup.

This kit of the Panasonic GH Series cage includes: the base Panasonic GH Series cage, quick release top handle, Tilta Hand Strap, Arca and Manfrotto quick release baseplates, a 15mm LWS baseplate for mounting accessories (as well as a single 15mm rod mounting clamp), an HDMI male to HDMI female cable, as well as a clamp to attach the HDMI cable comfortably to the cage and a clamp to attach both the HDMI and Nucleus Nano R/S cable comfortably to the cage.

This camera cage provides protective armor for the RED Komodo camera. It provides several 1/4”-20 and 3/8”-16 mounting points for mounting accessories. It also includes two rosettes on each side as well as a cold shoe mount on top. The base of the cage also provides several mounting holes when attaching your camera to gimbals to more easily fine tune the balance of your setup.

A variety of different baseplates can be attached to the bottom of the cage, allowing for various rod mounting and optional power supply configurations.

The quick release top handle, adjustable quick release top handle, and various optional side handles can be attached to the cage to provide for different ways to comfortably operate your camera setup.

This kit of the RED Komodo camera cage will help to fully build out your setup. It includes: the base RED Komodo cage, right side wooden handle, quick release top handle, Arca and Manfrotto quick release baseplates, 15mm LWS baseplate, an Adjustable Cold Shoe Accessory Mounting Bracket, and finally a Dual Canon BP to V Mount Adapter Battery Plate to allow for a longer battery life for your camera.

Tilta ES-T20-BTP-V kameramonteringstilbehør Batteriplate

These cables for the Nucleus-M give you run/stop capabilities in camera systems that support it. Simply plug the 7-pin end of the cable into one of the motors and the other end into the R/S port of the camera.

Note that this cable was specifically designed for the Nucleus-M so the R/S function only works with the Nucleus-M’s own hand unit and hand grips.

Weight: 0.09lbs
Length: 68.6cm
Color: Black
Materials: Copper, rubber, aluminum-alloy

The Tilta Camera Cage for DJI Ronin 4D Flex is the perfect foundation for taking your 4D Flex to the next level.

This camera cage expands your options for rigging the 4D by allowing you to build the system in a more traditional studio setup, which gives you unparalleled versatility and control.

The cage offers a variety of mounting options including Cold Shoe Receivers, NATO Rail and 1/4″-20 threads with locating pins.

The quick release mounting system ensures quick transitions between setups, saving you valuable time on set.

Additionally, the cage features multiple mounting points to the camera body which provide improved security for your camera and accessories.

When used with our optional accessories such as the 15mm LWS Baseplate and 15mm rods, this system becomes the perfect option for using heavier zoom lenses with the 4D Flex.

Elevate your DJI Ronin 4D Flex experience with the Tilta Camera Cage – the ultimate tool for greatly improving the flexibility to mount accessories to your system!

The Nucleus Nano II Hand Wheel to DJI Ronin Control Adapter is the perfect option for controlling the DJI Focus Motor via the Nano II Hand Wheel.

This adapter mounts to either side of the RS2 or RS3 Pro’s NATO Rail Mounting Points and utilizes two screws for a secure connection.

The adapter features two sets of contact pins for the Nano II Hand Wheel, allowing users to mount the unit at different heights based on preference or clearance restrictions with the pan motor.

The Hand Wheel mounts to the adapter via its internal NATO clamp and can draw power from the gimbal body in addition to being able to control the motor.

The Vertical Mounting Plate features a built in cold shoe, 1/4″-20 and 3/8″-16 threads for mounting wireless video transmitters, on-board monitors, external microphones and other accessories while shooting in a standard horizontal configuration.

This plate can also be used in conjunction with the Quick Release Baseplate for Sony FX6 in order to mount the camera in a vertical configuration.

The Armor Man 3.0 was designed to offer comfort and support while operating your gimbal by transferring the weight of the gimbal to your body’s core, taking significant weight off your arms. This allows you to operate your gimbal comfortably, for a much longer period of time while not sacrificing flexibility or performance.

Two mechanical arms with shock-absorbing stabilized systems attach to the back of the adjustable vest or on top of the vest in high mode. When engaged, the arms have two adjustable tension knobs on each arm to allow you to adjust the tension in relation to the weight of your gimbal rig as well as your preferred operation style.

The arms attach to any top bar gimbal system or gimbal ring system with the provided mounts or support cups, which you attach by just sliding the attachment right into the arms. Paired with the Universal Gimbal Ring Adapters and Nucleus M, the Armor Man 3.0 can become a one man operating system.

When you’re done operating, simply disengage the arms by pulling the release cords for each arm (in regular mode) and then comfortably rest them on the sides of the vest with the attached arm receiver. This allows you to keep the vest on in-between shots and then when you’re ready to operate again, simply re-engage the arms and re-attach the gimbal.

This Sony NP-FZ100 dummy battery to 5.5/2.5mm DC female cable allows you to power the Sony a9, a7 III and a7R III cameras as well as Sony NP-FZ100 power-based accessories through a 5.5/2.5mm DC male cable.