Tilta - side 23

Tilta MB-T12 kameramonteringstilbehør

Tilta LS-T05 kameramonteringstilbehør Objektivstøtte

This Full Camera Cage provides protective armor for the RED V-Raptor and greatly expands your options for mounting accessories.

The cage features both ¼”-20 and ⅜”-16 threads, integrated NATO Rails for Side Handles and two Arri compatible rosettes.

The base of the cage also provides several mounting options for attaching your camera to various quick release systems and natively supports our 15mm LWS Baseplate for RED V-RAPTOR.

The cage also features mounting points for the optional Side Single Rod Holder for RED V-RAPTOR, which offer a lightweight solution for mounting accessories such as follow focus motors via 15mm rods.

The included Front Top Plate offers expanded options for mounting accessories in a small, lightweight form factor.

The plate includes a Cold Shoe Receiver, 1/4″-20 and ⅜”-16 mounting points which support various accessories such as our quick release top handles, external monitors, wireless video transmitters, articulating arms, etc.

Use this monitor bracket in conjunction with the Nucleus-M FIZ Hand Unit Arri Standard Rosette Adapter which attaches to the back of the Nucleus-M’s hand unit. This allows you to attach a monitor to the hand unit for a compact focus pulling setup. The extra rosette attachment allows you to attach a variety of other accessories such as the Tilta Wooden Handle 2.0 for a comfortable two-hand setup.

This Canon LP-E6 dummy battery to P-tap cable was designed to be used with (although not exclusively) the Tilta Universal Battery Plate. It allows you to power cameras that use Canon LP-E6 batteries as well as Canon LP-E6 power-based accessories through a P-tap power port.

- No MDR Needed Wirelessly Control the Motors Up to 300m
- Run Stop Capable via Optional Camera Specific Run Stop Cables
- Manual Calibration Supports Lenses With and Without Hard Stops
- Compatible with Most Cinema Lenses via the Motor's 0.8 Gear Pitch or Included Gear Rings
- Universal Rod Mount Supports 15mm and 19mm Rods

This Nucleus-M motor kit allows you to add a motor to your Nucleus-M kit along with the 7-pin to 7-pin power cable that allows you to power the motor from a daisy-chained connection to another Nucleus-M motor.

This Canon LP-E6 dummy battery to 5.5/2.1mm DC male cable allows you to power cameras that use Canon LP-E6 batteries as well as Canon LP-E6 power-based accessories through a 5.5/2.1mm DC power port.

This hand grip bridge allows you to quickly connect your hand grips to your camera setup’s rod system to allow you to be ready for handheld operation in seconds. Simply fit the bridge onto the rods and use the hand-tightening screw to latch on.

The bridge comes in two versions: one that has rod mounting clamps for 15mm studio and 15mm LWS setups and another that has clamps for 19mm studio and 15mm LWS setups.

This versatile camera cage is designed for the Sony a6 series of cameras (a6000, a6300, a6500). It provides a high quality aluminum, CNC-milled protective armor for your camera that has several ¼”-20 and ⅜”-16 mounting points for attaching accessories. It’s designed to fit around the camera’s hot shoe mount as well as the battery and side input/output compartments.

A detachable top handle is included and features a cold-shoe mounting point (an additional cold shoe mount is on the top of the cage itself). This handle easily slides on and off of a small NATO rail that’s attached to the top of the cage.

On the bottom of the cage is a fan system with an on/off switch to help cool your camera if needed. Underneath the cooling system is a quick release plate that mounts to a 15mm LWS baseplate. This baseplate allows you to attach various accessories via 15mm rods and can mount to a Tilta Standard Lightweight Dovetail Plate to allow you to easily slide on and off of an operating setup. The baseplate also has a lens adapter support bracket built in to allow a way to mount various lens adapters (support screws for Metabones EF and PL mount adapters are included).

An optional right-side wooden handle can be added to your order. This handle is beautifully hand-carved from solid wood and features a very ergonomic design. It includes a recording run/stop button built in as well as a R/S cable of your choice. The wooden handle is attached via an Arri Standard Rosette connection on the right side of the camera.

Arm your camera with this Tilta camera cage specifically designed for the Canon C200.

On the bottom of the cage is a Sony VCT-U14 compatible baseplate that allows you to attach various accessories via 15mm LWS rods on either the front or back side of the plate. The plate also has an ergonomic shoulder pad on the bottom so that you can quickly and easily detach from the VCT-U14 plate and be shoulder mount-ready in no time. Also included in the package is a Tilta Standard Lightweight Dovetail compatible adapter plate for the baseplate if you’d rather mount to a dovetail (dovetail sold separately). The plate also has Arri Standard Rosette connections on the left and right sides to allow you to attach handles for handheld operation as well as a built-in lens adapter support bracket.

This updated Battery Plate for Sony Venice 2 comes in both Gold Mount or V-mount.

It integrates with the Top Plate via an external cable, which provides reliable power and communication to the cage’s various ports.

This cable also accommodates and is fully compatible with the larger size of the external recording module that can be attached to the rear of the camera.

This greatly expands your options for powering accessories and wirelessly triggering the camera.

Arm your camera with this Tilta camera cage specifically designed for the Sony Venice. It provides a high quality aluminum, CNC-milled protective armor for your camera that has several 1/4"-20 and 3/8"-16 mounting points for attaching accessories.The Tilta Battery Plate for Sony Venice (available in either gold mount or V-mount) integrates with the top plate through a pin connection to provide several power outputs. This allows you to power your accessories from virtually anywhere on the cage.The top plate can be attached to the base camera but the cage also comes with an extension to the top plate if you have the AXS-R7 recorder attached. This allows the top of the cage to lay across the camera and recorder all the way to the back of the battery plate. This extension piece also provides an extra P-tap port.The top plate features a built-in 3-pin cable that when plugged into the Venice's top 3-pin port sends R/S functionality to all of the cage's 3-pin R/S ports.The Venice's EVF can be mounted off the top plate by attaching to the 15mm LWS rods that can be inserted to the front of the top plate.The top handle can easily slide on and off the top plate to adapt the camera for Steadicam and gimbal setups. Optional top handle extensions can be attached to provide a handle that hangs over the back of the battery plate for precise operating.The baseplate features a built-in shoulder pad and is compatible with Tilta-standard dovetails. An optional Tilta-standard to Arri-standard baseplate can be attached to allow you to use Arri-standard dovetails.

Arm your camera with this Tilta camera cage specifically designed for the Sony Venice Rialto. It provides a high quality aluminum, CNC-milled protective armor for the sensor block of the camera that has several ¼”-20 and ⅜”-16 mounting points for attaching accessories. A battery plate (available in either gold mount or V-mount) can be mounted to the back of the sensor block. This then sends power to a 3-pin Fischer and 2-pin Lemo port on the front of the cage to allow you to power accessories. The included 3-pin Fischer cable sends communication from the camera’s 3-pin communication port to a 3-pin Fischer port on the back of the cage (facing the operator), which then sends R/S functionality to a 3-pin R/S port on the front of the cage.

Two extension arms and wooden handles are included in the kit to allow you to attach to the cage’s two Arri standard rosettes that are on the sides, giving you a comfortable way to operate.

The kit also includes a backpack that incorporates a dovetail and small baseplate to mount the camera body onto so that you have a comfortable, ergonomic way to operate and transport your whole Rialto camera setup. The backpack also has a battery plate (available in either gold mount

The Sony Venice Rialto Backpack incorporates a dovetail and small baseplate to mount the Rialto camera body onto. When coupled with the sensor block's cage, it provides you with a comfortable, ergonomic way to operate and transport your whole Rialto camera setup. The backpack also has a battery plate (available in either gold mount or V-mount) attached for if you need extra power on your setup.

Arm your camera with this Tilta camera cage specifically designed for the Sony Venice Rialto. It provides a high quality aluminum, CNC-milled protective armor for the sensor block of the camera that has several 1/4"-20 and 3/8"-16 mounting points for attaching accessories. A battery plate (available in either gold mount or V-mount) can be mounted to the back of the sensor block.This then sends power to a 3-pin Fischer and 2-pin Lemo port on the front of the cage to allow you to power accessories. The included 3-pin Fischer cable sends communication from the camera's 3-pin communication port to a 3-pin Fischer port on the back of the cage (facing the operator), which then sends R/S functionality to a 3-pin R/S port on the front of the cage.Two extension arms and wooden handles are included in the kit to allow you to attach to the cage's two Arri standard rosettes that are on the sides, giving you a comfortable way to operate.When coupled with the Sony Venice Rialto Backpack (sold separately), it provides you with a comfortable, ergonomic way to operate and transport your whole Rialto camera setup.

Arm your camera with this Tilta camera cage specifically designed for the Sony Venice. It provides a high quality aluminum, CNC-milled protective armor for your camera that has several 1/4"-20 and 3/8"-16 mounting points for attaching accessories.The Tilta Battery Plate for Sony Venice (available in either gold mount or V-mount) integrates with the top plate through a pin connection to provide several power outputs. This allows you to power your accessories from virtually anywhere on the cage.The top plate can be attached to the base camera but the cage also comes with an extension to the top plate if you have the AXS-R7 recorder attached. This allows the top of the cage to lay across the camera and recorder all the way to the back of the battery plate. This extension piece also provides an extra P-tap port.The top plate features a built-in 3-pin cable that when plugged into the Venice's top 3-pin port sends R/S functionality to all of the cage's 3-pin R/S ports.The Venice's EVF can be mounted off the top plate by attaching to the 15mm LWS rods that can be inserted to the front of the top plate.The top handle can easily slide on and off the top plate to adapt the camera for Steadicam and gimbal setups. Optional top handle extensions can be attached to provide a handle that hangs over the back of the battery plate for precise operating.The baseplate features a built-in shoulder pad and is compatible with Tilta-standard dovetails. An optional Tilta-standard to Arri-standard baseplate can be attached to allow you to use Arri-standard dovetails.

Gravity G Series Smartphone Adapter
This adapter allows smartphones (with widths up to 3 inches) to be mounted to the G1/G2/G2X quick release baseplate. Additionally, this smartphone adapter can be used to mount a smartphone to any other ¼”-20 screw hole to fit your needs. The innovative design allows for the smartphone to be mounted vertically or horizontally in seconds.

Use this Rosette Mount Splitter to divide one of the Arri Standard Rosettes on the sides of the Gravity G1, G2, and G2X into two. CNC-milled from high grade aluminum-alloy, the support provided by the splitter is both strong and lightweight. When used in conjunction with the Monitor Bracket or Accessory Mounting Bracket, limitless accessory mounting configurations are possible especially with a Rosette Mount Splitter on either side of the gimbal!

Tilta TGA-RCR videostabilisatortilbehør Mottaker Sort Aluminium, Rustfritt stål 1 stykker DJI RS2, RS3 Pro

This handle powers from a Sony L-Series Battery (F550/570) and can send power to the Nucleus Nano II Hand Wheel for extended battery life. (battery not included)

This handle also allows users to power accessories via the integrated USB-C and DC power outputs.

The handle features a 1/4″-20 thread with locating points, perfect for mounting our Right Angle Rosette Adapter in order to easily integrate this handle into a shoulder rig setup.

The top of the handle also features a cold shoe receiver, which can be used with our optional Cold Shoe Mount for an external monitor in order to create the perfect focus pulling station when used with the Hand Wheel.

NOTE: The NATO Mount is only intended for the Nano II Hand Wheel. Do not connect other accessories via this NATO mount or you will risk damaging the contact pins.

TILTA recommend using only Sony L-Series F550 Batteries. Compatibility with other brands is not guaranteed.

- Camera Communication for Adjusting Settings such as ISO, Shutter Speed, & Frame Rate via Wifi, Bluetooth & USB-C
- Multiple Motors Can be Controlled by the Hand Wheel, with Expansion Options Supporting up to 4 Motors when used with the Control Handle (optional)
- Lens Mapping Displays Real Time Focal Distance Information for More Accurate Focus Pulling
- Compatible with Nucleus M, Nano, DJI Focus Motors, DJ Ronin S Series Gimbals, as well as Canon, Sony, Blackmagic Design Cameras
- Touch Screen Display Provides Easy Access to Advanced Features and Streamlines on Set Workflow

This P-tap to 7-pin cable for the Nucleus-M allows you to power the motors from a P-tap power output port. Simply plug this cable into one of the motors and then daisy chain power to the other motors using the Nucleus-M 7-pin to 7-pin power cables.

This Nucleus-M motor kit allows you to add a motor to your Nucleus-M kit along with the 7-pin to 7-pin power cable that allows you to power the motor from a daisy-chained connection to another Nucleus-M motor.

The Gold mount Tilta Power Supply System for Blackmagic Cinema Camera mounts quickly onto a 15mm LWS rod system and is designed to provide power to your cameras and other devices while on the go. The system features a Gold mount battery plate and outputs for 12V, 8V, and 5V coaxial as well as a 14.8V D-Tap port for powering your Blackmagic Cinema Camera or other 14.8 VDC gear.

The plate utilizes an adjustable 15mm LWS rod mount for easily attaching it to your rig and for adjusting it from flat to nearly upright. Included with the system is a 12V power cable, two 5V power cables, a 7.2V power cable, and a D-Tap to Blackmagic Cinema Camera dummy battery.

This 15mm LWS Baseplate adds 15mm rod support to your RED V-RAPTOR which allows you to utilize rod based accessories such as matte boxes and follow focus systems.

This baseplate natively connects to our Full Camera Cage for RED V-RAPTOR and features a quick release connection that allows you to easily detach your camera from this baseplate when needed.

The built in safety release pin helps lock the cage in place and provides additional security to ensure your camera stays securely connected to this baseplate.

Underneath this baseplate you’ll find a receiver that natively connects to our Tilta Standard Dovetails or ARRI Standard Dovetails via our optional Tilta Standard to Arri Standard Multi-Functional Baseplate.

This baseplate can also mount to third party quick release plates via 1/4″-20 and 3/8″-16 threads.