Trykkrør & Beslag - side 17

Prestabo T-piece with SC-Contur- galvanised non-alloyed steel- press connectorsComponentsEPDM sealing elementsd1: 28, d2: 15, d3: 28

Viega 1112

Prestabo T-piece with SC-Contur- galvanised non-alloyed steel- press connectorsComponentsEPDM sealing elementsd1: 22, d2: 18, d3: 22

Viega 1112

Viega 1118

Viega 1118

Viega 1112

Viega 1111

Viega 1115.1

Viega 1115.1

Viega 1111

Viega 1115.5

Prestabo Adapter elbow 90° with SC-Contur- galvanised non-alloyed steel- press connection, R-threadComponentsEPDM sealing elementd: 28, R: 1

Viega 1116.1

Press connector systems with press connectors and pipes made of non-alloy steel 1.0308 (E235), in acc. with EN 10305-3, externally galvanised with a zinc layer thickness of 8–15 m (blue chromatised).Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingRed symbol (to prevent confusion with Sanpress Inox (stainless steel) articles) »Not for drinking water installations«Sealing elementsEPDM, black (ethylene-propylene-dien-monomer rubber),not resistant against hydrocarbon solvent, chlorinated hydrocarbon solvents, turpentine, petrol, FKM, dull blackDimensionsD38

Viega 1116.1

Megapress Adapter with SC-Contur for drinking water installation- steel pipes in accordance with DIN EN 10220/10255 with galvanizing in accordance with DIN EN 10240- gunmetal or silicium bronze- press connectorsComponentsEPDM sealing elements, cutting ring, separator ringDN: 50, D: 2, d: 54

Megapress-adapter med SC-Contur for drikkevannsinstallasjon - stålrør i samsvar med DIN EN 10220/10255 med galvanisering i samsvar med DIN EN 10240 - bronse eller silisiumbronse - trykkontakterKomponenterEPDM tetningselementer, skjæring ring, separatorringDN: 40, D: 112, d: 42

Viega 4211

Megapress-adapter med SC-Contur for drikkevannsinstallasjon - stålrør i samsvar med DIN EN 10220/10255 med galvanisering i samsvar med DIN EN 10240 - bronse eller silisiumbronse - trykkontakterKomponenterEPDM tetningselement, skjæring ring, separatorringDN: 15, D: 12, d: 15

Press connector systems with press connectors and pipes made of non-alloy steel 1.0308 (E235), in acc. with EN 10305-3, externally galvanised with a zinc layer thickness of 8–15 m (blue chromatised).Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingRed symbol (to prevent confusion with Sanpress Inox (stainless steel) articles) »Not for drinking water installations«Sealing elementsEPDM, black (ethylene-propylene-dien-monomer rubber),not resistant against hydrocarbon solvent, chlorinated hydrocarbon solvents, turpentine, petrol, FKM, dull blackDimensionsD38

Viega 1126.1

Viega 2626

For sanitære anlegg og industri, for varmesystemer, kjøling og industri.

Geberit 21211 vannslange kopling Slangekontakt Karbon, Stål 1 stykker