Trykkrør & Beslag - side 34

Viega 2212

Sanpress Inox T-piece with SC-Contur- steel non-corroding- press connectors, Rp-threadComponentsEPDM sealing elements, polygond1: 15, Rp: 12, d2: 15

Viega 2217.2

Viega 2217.2

Viega 2217.2

Sanpress T-stykke med SC-Contur- gunmetal eller silisiumbronse- presskoblinger. Komponenter: EPDM tetningselementer d1: 35, d2: 35, d3: 35

Viega 2218

Viega 2218

Viega 2218

Sanpress T-piece with SC-Contur- gunmetal or silicium bronze- press connectorsComponentsEPDM sealing elementsd1: 18, d2: 22, d3: 18

Viega 1117.2

Geberit 35337 vannslange kopling Slangekontakt Rustfritt stål 1 stykker

Sanpress Inox T-piece with SC-Contur- steel non-corroding- press connectors, Rp-threadComponentsEPDM sealing elements, polygon, VdS certificationd1: 28, Rp: 34, d2: 28

Profipress G T-piece with SC-Contur- gunmetal- press connectors, Rp-thread- polygonComponentsHNBR sealing elements d1: 28, Rp: 12, d2: 28

Sanpress Inox XL T-stykke med SC-Contur- stål ikke-korrosive- trykk-koblingerKomponenterEPDM tetningsdeler, skjærringer, separatorringer, VdS-sertifiseringd1: 88.9, d2: 88.9, d3: 88.9

Press connector system with press connectors and pipes made of stainless steel material Nos. 1.4401 and 1.4521 in acc. with DIN EN 10088, DIN EN 10312, DVGW worksheet GW 541, system certification for connectors and pipes in acc. with DVGW worksheet W 534, for drinking water installations in acc. with DIN 1988. For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-die

Viega 2312

Viega 2315.1

Viega 2326.1

Viega 2212

Sanpress-kobling med SC-Contur i messing eller silisiumbronse - trykkontakterKomponenterEPDM-tetningselementerd: 15

For cold and hot potable water, For heating water, For cooling water without antifreeze agent, For cooling water with antifreeze agent, For remote network heating water 120 °C, For saturated steam 120 °C, For service water, For ultrapure water (except pharmaceutical water), For rainwater with a pH value of > 6.0, For grey and black water with pH value > 6.0, For extinguishing water (wet), For sprinklers (wet), For chemicals and technical liquids, For compressed air (oil purity class 0–3), For negative pressure, For inert gases (e.g. nitrogen), For industrial gases (e.g. acetylene, shielding gases), For technical building systems, industry and shipbuilding, Application overview: Geberit Mapress Stainless Steel for liquid media, Application overview: Geberit Mapress Stainless Steel for gaseous media.

T-piece ft cst d22-rp3/4-22 zn-pl

Viega 1118