THERMEX Avtrekksvifter

Carbon filter set of 2 for model Cambrigde II and Glasgow. The carbon filters are to be installed on the inlet of the motor.
This type of carbon filters needs to be changed 3-4 times a year, depending on usage. 

Exhaust kit 2 for Thermex Typhoon and Tornado, consists of a few parts, and is for those of you who have your hob and hood located directly on top of an external wall. With this kit, you avoid long piping, and thus get a better exhaust.

Powerful and quiet motor for placement on the outside of the house wall.

Thermex integro 51 II 90 cm with motor is a minimalist built-in extractor hood which is hidden in the upper cupboard, the built-in control makes it easy to use the extractor. The simple assembly concept makes it possible to replace the existing extractor hood without replacing the upper cabinet.

Many houses today have their own ventilation system with a heat recovery function. These ventilation systems ensure that as much air is blown into the house as is sucked out. In other words, there is a balance in the air exchange. The signal from the Thermex Trigger Link can also be used to activate other installations in the home. When the hood with its own exhaust is switched on, suddenly more air is sucked out of the house than is blown in. A negative pressure is thus created inside the house, and this has the consequence that smoke from the stove or fireplace can be sucked into the living room. Dust and impurities from outside can enter the house and the hood can absorb less well, while it can also be difficult to open doors and windows.

Trigger Link from Thermex ensures that the moment you switch on your hood, a signal is sent to the ventilation system to blow more air into the house, so that a balance is again created in the air exchange. The Thermex Trigger Link is connected between the power outlet and the receptacle, at the same time a connection is made to the heat recovery system.; For connection, please refer to the instructions from the individual provider of the heat recovery system.

Thermex integro 51 II 60 cm with motor is a minimalist built-in extractor hood which is hidden in the upper cupboard, the built-in controls make it easy to use the extractor. The simple assembly concept makes it possible to replace the existing extractor hood without replacing the upper cabinet.