Wera - side 15

Skrutrekkersett, 7 deler, isolert

Typically Wera designed robust textile belt for 6 sockets/bit sockets (½") taking up minimal space. A smooth Twist to Unlock mechanism ensures a secure fit and simple removal of the sockets. Includes a snap hook for secure fastening to a belt loop or pocket. Supplied with a non-woven reverse side and hook and loop strips for simple attachment e.g. to a wall, shelf, tool trolley and to the Wera 2go tool transport system.

Series 900 932/918, Skrutrekkersett, 6 deler, inn bakke

Wera chip lifter, for eksempel for å fjerne fastmonterte deler fra et kretskort etter lodding. Roterende hette for raskt arbeid; anti-rullefunksjon.

High quality bits for Phillips screws in a practical Bit-Box. The Impaktor technology ensures above-average service life even under very demanding circumstances. The enhanced friction resistance from the rough diamond-particle coating on the tip of the bit prevents any slipping out of the screw head. Particularly suitable for use with customary impact drivers; 1/4" hex, appropriate for holders as per DIN ISO 1173-D 6.3. Come with "Take it easy" Toolfinder: colour coding according to profile and size stamp.

VDE interchangeable blades with Kraftform handle

Høykvalitets biter for Pozidriv-skruer. Tøff viskositet for universell bruk. ¼” sekskant, egnet for holdere i henhold til DIN ISO 1173-D 6.3.
* Pozidriv = registrert varemerke av European Industrial Service Ltd.

L-nøkkelsett, 9 deler, inn holder

Pouch with bits in a length of 89 mm. Includes torque screwdriver 7441 with Rapidaptor quick-release chuck and multi-component Kraftform handle for low-fatigue working. Suitable for manual and power tool operations. 17-piece; compact handle/interchangeable blade system for torque-controlled tightening. Includes torque holder 7441, settings from 1.2 to 3.0 Nm. Adjustable in 0.10 Nm steps. Simple setting of the required torque value without any special tools. Easy-to-read scale value. Rapidaptor quick-release technology for rapid bit change. Unlimited torque to loosen seized screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Includes 16 bits with a length of 89 mm and a practical pouch for tidy storage.

VDE interchangeable blades for slotted screws

Valve Holder, 32x70 mm

Wera 05073421001 nøkkelsett (verktøy) Stikkontakt

6-delt skrutrekker sett med Kraftform Plus håndtak for behagelig, ergonomisk arbeid som forebygger blemmer og hard hud. Harde grepssoner for høye arbeidshastigheter mens myke soner sikrer høy dreiemomentoverføring. Delvis Lasertip: spissen biter bokstavelig talt inn i hodet på skruen og hindrer dermed at den glir ut av skruehodet. "Take it easy" Tool Finder: fargekoding etter profil og størrelse. Den heksagonale anti-rullefunksjonen hindrer irriterende rulling på arbeidsplassen. Inkluderer praktisk stativ for ryddig oppbevaring av skrutrekkere.

Wera compact tools enable both manual as well as power tool operations at the same time. The handle/interchangeable blade system in a compact design with various blade tips in the smallest of spaces makes the user more mobile and flexible. Suitable for bits with 14" hexagon head drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173) and Wera connecting series 1 and 4. Comes with an adaptor, bayonet and Rapidaptor technology. Kraftform handle with anti-roll feature, multi-component for particularly ergonomic screwdriving. Integrated magazine for bit storage. In this way, the set replaces a 6-piece screwdriver set and reduces the equipment required to a minimum. The telescopic bayonet blade – which can be lowered into the handle – together with the quick-release chuck allows fast manual work even in confined installation situations when the blade is retracted. The blade can be extended by simply actuating the locking sleeve. The bayonet holder can then be used as a fully-fledged screwdriver. The bayonet blade can be removed and used as a power tool adaptor, but can also be retracted once again to its original position. Includes practical belt pouch.

L-nøkkelsett, 9 deler, inn holder

Screwdriver handle with bit set, 6 deler

Torque wrench with pre-set torque value for all applications where the same torque and repeat accuracy is required. The torque value can be changed within the metered range. The robust release mechanism guarantees a clearly audible and tactile trigger signal when the set torque value is reached. Square socket for interchangeable plug-in tools for clockwise and anti-clockwise torque-control. A presetting which deviates from this value to a desired torque value within the specified metered range is possible on request.

Redusert bladdiameter med integrert isolasjonsbeskyttelse slik at selv lavtliggende skruer og fjærer kan nås og aktiveres. Kraftform Plus-håndtak for behagelig, ergonomisk arbeid som gjør blemmer og hard hud til en ting fra fortiden. Harde gripeområder for høye arbeids hastigheter mens myke soner sikrer høy dreiemomentoverføring. Den heksagonale anti-rullefunksjonen hindrer irriterende rulling på arbeidsplassen.

Sokkeladaptersett, 3 deler, 1/4", 1/2", 3/8", heksagonal

Robust Bit-Check by Wera. Bit-Checks provide a quick overview of the tools available. Bits not needed are simply reinserted into the set and do not get lost. Simple transportation e.g. in the shirt pocket. Includes universal holder with strong permanent magnet for the take-up of bits with ¼” hexagon head drive. Can be inserted in the power screwdriver or for use in the chuck of the electric drill. Multi-component Bit-Check that can be positioned upright for permanently secure bit storage.

Høykvalitets Wera Micro muttertrekker sett for presisjonsmekanisk arbeid. Rask vridning er mulig ved å feste hånden på vridningshetten og bruke den hurtigvendende sonen rett under den. Dette gjør tidkrevende grepjusteringer unødvendige. Kraftsone med integrerte myke soner sikrer overføring av høyere tilspennings- og løsningsmoment. Presisjonssone for riktig vinkel for justeringsarbeid. Inkluderer praktisk stativ for ryddig oppbevaring av skrutrekkere.

6 50 mm-long Wera bits tidily arranged in a minimum of space in a practical Bit-Check. The tough viscous bits are suitable for universal use. In the case of the Torsion bits (TZ), torque peaks are additionally absorbed in the Torsion zone. This prevents premature wear and enhances the service life.

Høykvalitets Kraftform Plus skrutrekker. Multi-komponent Kraftform håndtak for rask og lavt tretthet arbeid. Kraftform Plus: harde gripe soner for høye arbeids hastigheter mens myke soner sikrer høy dreiemoment overføring. Hex-Plus tilbyr en større kontaktflate innenfor skruhodet. Dette reduserer hakkingseffekter til et minimum og eliminerer nesten helt risikoen for å ødelegge skrue sporet. Den heksagonale anti-rulle funksjonen hindrer irriterende rulling på arbeidsplassen. Håndtaks merking for forenklet finne og sortere verktøyene.

Wera 867/1 IP TORX PLUS skrutrekker bits 1 stykker

VDE ⅜" bit socket with holding function for particularly comfortable screwdriving with reduced risk of screw loss when feeding to the component. With increased safety due to yellow insulation core, which becomes visible in case of damage to the outer red VDE insulation layer. Individually tested tool as per IEC 60900 at 10,000 V for safe working at the approved voltage of 1,000 V.