Wera - side 6

Kombinasjonsnøkkel, 7-10 mm

Ratcheting torque wrench with bit and socket set, 13 deler, 1/4", 3/8", inn holder

Kombinasjonsnøkkelsett, 4 deler, inn bærepung

Serie 300 Stubby Set 1, Skrutrekkersett, 5 deler

Høykvalitets Wera Micro skrutrekker sett for presisjonsmekanisk arbeid. Rask vridning er mulig ved å feste hånden på vridningshetten og bruke den hurtigvendende sonen rett under den. Dette gjør tidkrevende grepjusteringer unødvendige. Kraftsone med integrerte myke soner sikrer overføring av høyere tilspennings- og løsningsmoment. Presisjonssone for riktig vinkel for justeringsarbeidet. Wera Black Point-spissen gir høy korrosjonsbeskyttelse og en nøyaktig passform. Inkluderer praktisk stativ for ryddig oppbevaring av skrutrekkere.

High quality Wera Micro screwdriver set for precision mechanical work. Ballpoint profile: the ballpoint drive profile means that it is possible to swivel the tool axis away from the screwdriving axis, thus enabling “round the corner” screwdriving. Rapid twisting is possible by fixing the hand on the twist cap and using the fast-turning zone just below it. This makes time-consuming grip adjustments unnecessary. Power zone with integrated soft zones ensure the transfer of higher tightening and loosening torque. Precision zone for the right angle for adjustment work. The Wera Black Point tip offers high corrosion protection and an exact fit.

Høykvalitets Kraftform Plus skrutrekker. Multi-komponent Kraftform håndtak for rask og lavt tretthet arbeid. Kraftform Plus: harde gripe soner for høye arbeids hastigheter mens myke soner sikrer høy dreiemoment overføring. Wera Black Point spissen og en kompleks herdingsprosess sikrer lang levetid på spissen, økt korrosjonsbeskyttelse og en nøyaktig passform. Den sekskantede anti-rulle funksjonen hindrer irriterende rulling bort fra arbeidsplassen. Håndtaksmerking for forenklet finne og sortere verktøyet.

Wera SH 2 15 verktøy

Wera 2go 2 Sort, Grønn

Verktøyaksel for muttertrekkere. Utgang: ¼ kvadrathode; driv: ¼" heksagon.

Robust tekstilbelte med 5 tilkoblingsdeler: 781 A: 1/4" firkantet hode socket drive, for 3/8" og 1/2" firkantet hode socket skiftenøkkelinnsatser med ball lås; 781 B: 3/8" firkantet hode socket drive, for 1/4" og 1/2" firkantet hode socket skiftenøkkelinnsatser med ball lås;781 C: ​​1 /2 "firkantet hodestikkontaktstasjon, for innsetting av nøkkelskjefter på hodene på nøkkelen i størrelse fra tre åttendedeler tomme til en halv tomme.

Wera 05003990001 manuell skrutrekker Enkel Presisjonsskrutrekker

High quality bit holder for ESD-safe working. The electrical surface resistance of the Wera ESD material is at 10^6 – 10^9 Ohm. This dependably protects components against electrostatic energy and associated damage. The Rapidaptor quick-release chuck enables rapid bit change without needing any special tools. Kraftform Plus handle for pleasant, ergonomic working that makes blisters and calluses a thing of the past. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Suitable for bits with ¼” hexagon head drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173).

High quality set of ratcheting combination wrenches by Wera: Joker ratcheting combination wrenches with angled ratchet head and switch lever. The metal plate in the jaw provides for the holding function which reduces the risk of losing nuts and bolts. The integrated limit stop can prevent any slipping from the bolt head downwards and enables higher torque to be applied. The exchangeable metal plate in the jaw securely holds nuts and bolts with its extra hard teeth and reduces the risk of slipping. The double-hex geometry delivers a very positive connection with nuts or bolts and again provides for a lower risk of any slipping. The low return angle of only 30° at the jaw end avoids any time-consuming flipping of the wrench when fastening. The reversible ratchet mechanism at the ring end with its fine toothing (80 teeth) ensures great flexibility even in confined spaces. Audibly precise ratchet mechanism. Additionally, the robust two-piece locking element provides for an extreme stability. Comes with a 15° angled ratchet end for secure work even at high torque. The special forged geometry allows for high torque transfer and high flexural rigidity. Manufactured out of high-performance chrome-molybdenum steel with a nickel-chromium coating for high corrosion protection. With "Take it easy" Tool Finder: colour coding according to size.

Series 100 VDE 160 i/165 i, Skrutrekkersett, 7 deler, inn bakke

Wera 05006125001 manuell skrutrekker Enkel Presisjonsskrutrekker

High quality set of ratcheting combination wrenches by Wera: Joker ratcheting combination wrenches with angled ratchet head and switch lever.

Sizes: 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19

Høykvalitets holder for rustfrie stålbiter for å unngå dannelse av fremmed rust. Rapidaptor hurtigutløser gjør det mulig med rask bitbytte uten behov for spesielle verktøy. Kraftform Plus-håndtak gir en behagelig, ergonomisk arbeidsstilling som gjør at blemmer og hard hud er en ting fra fortiden. Harde grepssoner gir høye arbeidshastigheter mens myke soner sikrer høy momentoverføring. Egnet for bits med ¼" sekskantet hodestasjon i henhold til DIN ISO 1173-C 6,3 og E 6,3 (ISO 1173).

Høykvalitets Kraftform Plus skrutrekker. Multi-komponent Kraftform håndtak for rask og lavt tretthet arbeid. Kraftform Plus: harde gripe soner for høye arbeids hastigheter mens myke soner sikrer høy dreiemoment overføring. Wera Black Point spissen og en kompleks herdingsprosess sikrer lang levetid på spissen, økt korrosjonsbeskyttelse og en nøyaktig passform. Den sekskantede anti-rulle funksjonen hindrer irriterende rulling bort fra arbeidsplassen. Håndtaksmerking for forenklet finne og sortere verktøyet.

43-piece Zyklop set in robust metal case: Zyklop ratchet with 3/8"drive. The 72 fine-pitched teeth enable a low return angle of only 5°. The ratchet head pivots freely and can be locked into any position by using the slide switch that is positioned on either side. It is even possible to work conveniently in very confined and difficult-to-access areas with enhanced hand clearance. The predefined locking positions at 0°, 15° und 90°, both to the right and left, ensure safe working without any slipping of the ratchet head. The ratchet can be used as a conventional screwdriver in the 0° position by attaching an adaptor and a bit. The flywheel design ensures rapid screwdriving. The rotation-symmetric construction of the Kraftform handle and the free-turning sleeve support rapid twisting. The outstanding design of the Kraftform handle fits perfectly into the hand preventing hand injuries such as blisters and calluses. The hard materials used for the handle ensure quick and easy hand repositioning without any danger of the skin "sticking" to the handle. The softer anti-slip zones enable the low-loss transfer of high torque. For 3/8" square sockets as well as 3/8" adaptors with square drive, equipped with ball lock. Including 18 Zyklop sockets, 2 Zyklop extensions with free-turning sleeve, 1 T-handle, 1 wobble extension, 1 universal joint, 1 adaptor with quick-release chuck, 18 bits. "Take it easy" Tool Finder with colour coding according to sizes.

Universal holder for bits with 14" hexagon head drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). BiTorsion holders by Wera have a torsion spring that absorbs low peak loads during screwdriving jobs. The combined use with BiTorsion bits and their torsion zones extends the service life of the tool considerably. BiTorsion holders by Wera can, however, also be used with conventional bits. The Rapidaptor technology allows bits to be attached without any need to actuate the sleeve. The removal of the bit is simple, just by pushing the sleeve forward. This enables rapid bit change with just one hand. 14" hexagonal, suitable for power screwdrivers with take-up as per DIN ISO 1173-F 6.3.

Oppreist posisjonerbar Bit-Check med høykvalitets rustfrie bits. Wera rustfritt stål er laget av rustfritt stål som forhindrer dannelse av stygge ekstranøse rust. ¼” sekskant, egnet for holdere i henhold til DIN ISO-F 6.3.

Zyklop ratchet with 1/4"drive. The 72 fine-pitched teeth ensure a low return angle of only 5°. The ratchet head pivots freely and can be locked into any position by using the slide switch that is positioned on either side. It is even possible to work conveniently in very confined and difficult-to-access areas with enhanced hand clearance. The predefined locking positions at 0°, 15° und 90°, both to the right and left, ensure safe working without any slipping of the ratchet head. The ratchet can be used as a conventional screwdriver in the 0° position by attaching an adaptor and a bit. The flywheel design ensures rapid screwdriving. The rotation-symmetric construction of the Kraftform handle and the free-turning sleeve support rapid twisting. The outstanding design of the Kraftform handle fits perfectly into the hand preventing hand injuries such as blisters and calluses. The hard materials used for the handle ensure quick and easy hand repositioning without any danger of the skin "sticking" to the handle. The softer anti-slip zones enable the low-loss transfer of high torque. For 1/4" square sockets as well as 1/4" adaptors with square drive, equipped with ball lock.

Høykvalitets bits for innfelte TORX®-skruer. Tøff viskositet for universell bruk. 14" heksagon, egnet for holdere i henhold til DIN ISO 1173-F 6.3.

ESD-safe Wera tool. 16 bits. Includes 2 817 VDE holders, multi-component for high working speeds and particularly ergonomic screwdriving.