Tilta Foto- & Videotilbehør - side 12

Tilta MB-T15-67 camera filter tilbehør Filterholder-adapterring

Tilta MB-T15-72 camera filter tilbehør Filterholder-adapterring

The Illusion Filters are the new, in house manufactured set of filters specifically designed for the Circular 95mm Standard of the Mirage Matte Box.

This filter is available in various levels of Neutral Density, providing users greater control over their exposure.

This allows users to reduce light visible to the sensor, allowing you to open up your aperture when shooting in brighter lighting environments like daylight.

Full Spectrum ND Filters evenly reduce all wavelengths of light including visible light, ultra violet, and infra-red.

This Power Supply Module is the perfect mounting and power solution for the DJI Video Transmitter.

The front and back plates of the module can be installed on both sides of the video transmitter.

The front side of the module allows you to mount your DJI Video Transmitter to a Gold/V-Mount Battery Plate on your camera system.

The back side then allows you to mount a Gold or V-Mount battery to the transmitter which can provide power to the transmitter as well as pass power through the module to the camera body.

This is a fantastic option for those who are looking for a clean and convenient way to mount and power the DJI transmitter.

Tilta TA-SFH1-97-G kameramonteringstilbehør Håndtak

Tilta RS-WLC-T04-SYA videostabilisatortilbehør Kontrollkabel Sort Akrylonitril-butadien-styren (ABS), Gummi, Rustfritt stål 1 stykker Sony a6/a7/a9/a7sIII, FX3, A1

Tilta TGA-RG-V videostabilisatortilbehør Batteriplate Sort Aluminium, Rustfritt stål 1 stykker DJI Ronin RS 2

Tilta TA-T23-CC1 kameramonteringstilbehør Kabelklemme

This cable is for use with the Tilta Camera Cage for Sony a7/a9 Series and Tilta Camera Cage for Sony a6 Series. It adapts the Micro HDMI port in the camera to a female HDMI, allowing for the connection of an external monitor and/or transmitter using a regular HDMI cable.

Tilta ES-T20-BTP-V kameramonteringstilbehør Batteriplate

This “half” camera cage provides protective armor for the Sony a7S III camera. It provides several 1/4”-20 mounting points as well as one cold shoe mounting point.

The base of the cage also provides several mounting holes when attaching your camera to gimbals to more easily fine tune the balance of your setup.

A variety of different baseplates can be attached to the bottom of the cage, allowing for various rod mounting and optional power supply configurations.

A Tiltaing Lightweight Quick Release Top Handle with Arri Locating Pins can be attached to the cage to provide for a comfortable camera operating setup.

These cables for the Nucleus-M give you run/stop capabilities in camera systems that support it. Simply plug the 7-pin end of the cable into one of the motors and the other end into the R/S port of the camera.

Note that this cable was specifically designed for the Nucleus-M so the R/S function only works with the Nucleus-M’s own hand unit and hand grips.

Weight: 0.09lbs
Length: 68.6cm
Color: Black
Materials: Copper, rubber, aluminum-alloy

The Tilta Camera Cage for DJI Ronin 4D Flex is the perfect foundation for taking your 4D Flex to the next level.

This camera cage expands your options for rigging the 4D by allowing you to build the system in a more traditional studio setup, which gives you unparalleled versatility and control.

The cage offers a variety of mounting options including Cold Shoe Receivers, NATO Rail and 1/4″-20 threads with locating pins.

The quick release mounting system ensures quick transitions between setups, saving you valuable time on set.

Additionally, the cage features multiple mounting points to the camera body which provide improved security for your camera and accessories.

When used with our optional accessories such as the 15mm LWS Baseplate and 15mm rods, this system becomes the perfect option for using heavier zoom lenses with the 4D Flex.

Elevate your DJI Ronin 4D Flex experience with the Tilta Camera Cage – the ultimate tool for greatly improving the flexibility to mount accessories to your system!

The Nucleus Nano II Hand Wheel to DJI Ronin Control Adapter is the perfect option for controlling the DJI Focus Motor via the Nano II Hand Wheel.

This adapter mounts to either side of the RS2 or RS3 Pro’s NATO Rail Mounting Points and utilizes two screws for a secure connection.

The adapter features two sets of contact pins for the Nano II Hand Wheel, allowing users to mount the unit at different heights based on preference or clearance restrictions with the pan motor.

The Hand Wheel mounts to the adapter via its internal NATO clamp and can draw power from the gimbal body in addition to being able to control the motor.

- Protective Armor for Sony FX3 & FX30 Minimizes Wear and Supports Accessories
- Mount Accessories via Top Plate NATO Rail, Cold Shoe Receivers, 1/4"-20 and 3/8"-16 Threads with Locating Pins
- Arca Baseplate with Universal Design Supports Fast Transitions to Ronin Series Gimbals
- NATO Top Handle Provides Improved Flexibility When Operating and Handling
- Cable Clamp Secures Cables in Place with Convenient Thumb Screw Design

The Vertical Mounting Plate features a built in cold shoe, 1/4″-20 and 3/8″-16 threads for mounting wireless video transmitters, on-board monitors, external microphones and other accessories while shooting in a standard horizontal configuration.

This plate can also be used in conjunction with the Quick Release Baseplate for Sony FX6 in order to mount the camera in a vertical configuration.

The Armor Man 3.0 was designed to offer comfort and support while operating your gimbal by transferring the weight of the gimbal to your body’s core, taking significant weight off your arms. This allows you to operate your gimbal comfortably, for a much longer period of time while not sacrificing flexibility or performance.

Two mechanical arms with shock-absorbing stabilized systems attach to the back of the adjustable vest or on top of the vest in high mode. When engaged, the arms have two adjustable tension knobs on each arm to allow you to adjust the tension in relation to the weight of your gimbal rig as well as your preferred operation style.

The arms attach to any top bar gimbal system or gimbal ring system with the provided mounts or support cups, which you attach by just sliding the attachment right into the arms. Paired with the Universal Gimbal Ring Adapters and Nucleus M, the Armor Man 3.0 can become a one man operating system.

When you’re done operating, simply disengage the arms by pulling the release cords for each arm (in regular mode) and then comfortably rest them on the sides of the vest with the attached arm receiver. This allows you to keep the vest on in-between shots and then when you’re ready to operate again, simply re-engage the arms and re-attach the gimbal.

This Sony NP-FZ100 dummy battery to 5.5/2.5mm DC female cable allows you to power the Sony a9, a7 III and a7R III cameras as well as Sony NP-FZ100 power-based accessories through a 5.5/2.5mm DC male cable.

This Tilta Universal Power Supply System from ikan mounts quickly to a 15mm rod system and is designed to provide power to your cameras and other devices while on-the-go. The system features a V-mount battery plate and outputs for 12V, 8V, and 5V coaxial as well as a 14.8V P-Tap port for powering your equipment. Additionally, it utilizes an adjustable 15mm rod mount for easily attaching it to your rig.

Included with the system are a V-mount battery plate, a 12V adapter cable, and a 5V adapter cable designed to work with the Zoom H4N. Also, a Canon LP-E6 compatible battery adapter is included for powering a camera or accessory as well as a P-Tap to Blackmagic Cinema Camera cable.

Comes with brackets and storage cases that can be attached to equipment and cages with 1/4 threaded holes, and whiteboard markers.

The Pocket V-Mount Battery Plate V2 is the ultimate solution for mounting V-Mount batteries while adding as little weight as possible.

This makes the Pocket V-Mount Plate V2 an incredibly convenient option for powering your camera or accessories via high capacity V-Mount batteries while keeping your rig compact and lightweight enough for gimbal or drone use.

The physical dimensions of this plate is slightly larger than the V-Lock connection of a standard V-Mount battery which offers users unparalleled flexibility in terms of where they can mount this plate.

The plate features a universal 1/4″-20 screw with locating pins which provides a secure connection while minimizing risk of the plate rotating out of position.

This is the perfect accessory to pair with our Lightweight Shoulder Rig, Adjustable Accessory Mounting Plate or any of our Camera Cages.

- RF to PL Adapter Mount Supports PL Lenses on RF Mounts
- Back Focus Adjustment Tool Allows for Perfect Calibration for Any Sensor
- Universal, Compatible with Any ARRI Positive Lock Mount Lenses
- Compatible with RED Komodo, Canon R5/R5C, and other RF Mount Cameras
- Additional Support via 1/4"-20 Thread and Optional Cage Specific Adapter Support

Properties handle frame. Integrated power line and contacts enable wireless power supply. Power supply of gimbal and other accessories such as a monitor via optional V-Mount battery plate and optional power distribution module. Control options for focus, zoom, iris and gimbal settings via side handles. One 18650 battery is required to use the handles, which is not included in the scope of delivery.

Features carry bag: offers space for the extended grip frame including DJI RS 2 / RSC 2. Outer material and zipper are water-repellent. Partition in the middle. Various small pockets and pouches for storing accessories

Included supply:
1x Ring Grip Module, top (TGA-ARG-TK-UP)
1x Ring Grip Module, below (TGA-ARG-TK-DOWN)
1x receiver module for DJI RS 2 (TGA-WCR)
1x Transmitter / Handgrip Controller with Gimbal Control Function for DJI RS 2 (TGA-ARG-TK-RCH1)
1x transmitter / handle control unit (2 channel) to control focus, iris or zoom (TGA-ARG-TK-WCH1)

This 18mm NATO Rail Attachment can attach to the Tiltaing camera cages via two 1/4″-20 screws. This allows you to attach the various NATO rail-based handles to your setup to give you a more comfortable operating experience.

Tilta TGA-DHB2 kameramonteringstilbehør Kamerahåndtak