Elma Instruments Instrumenter - side 3

Senko sgt o2

Blå 200cm kvalitetstestledninger med fast hette, dobbeltisolert høy fleksibel silikon, 0,75 mm2 12A med isolerte stablingsbare 4 mm sikkerhetsbananplugger. Tekniske data: IEC 61010: CAT III 1000V, CAT IV 600V

Testprobe svart = 140mm

The EASYTEST kit, is a combination of a tone transmitter and a inductive trace probe. The trace probe is easy to use and solves problems in searching, identifying and trace cable installations. EASYTEST is able to find insulated cables on distances up to 60 cm, and is able to follow the cables up to 15 km. The instrumentet is able to trace/finding cables, split pairs, pairs, reversed pairs, short curcuits, disconnected leads and more. EASYTEST is an ideal instrument for the telecommunication/network installer tracing a single wirepair, the alarm installer who has to trace the cable route to the alarm system, the electrical installer who has to trace the cabling in a building and more. EASYTEST is used a vary of apllications where it is not possible to find a cable/wire phusical or visual. EASYTEST is even more equipped with two Talk-sets and is therefore able to use two way communication in systems up to 15 km. a very userable feature in places, where it s not possible to use walkie-talkies or mobile phones. Easytest can be conencted via the RJ 11 connector or the supplied crocodile clips. Technical data: Voltage protection: 110V AC/240V DC Range: 15 km Battery transmitter: 1x9V 6F22 (excl.) Battery receiver: 1x9V 6F22 (excl.) Size/weight transmitter: 68 x 96 x 25 mm / 150 g Size/weight receiver: 220 x 40 x 25 mm / 80 g

Elma 25 er en smart mini lommekort multimeter, utstyrt med den helt nye intelligente funksjonen "Auto Check", som automatisk oppdager og velger AC-spennings-, DC-spennings- og kontinuitetstest/motstand. Instrumentet har en stor skjerm og måler spenning, motstand, frekvens, kontinuitet og kapasitet. Elma 25 er utstyrt med automatisk områdesøkning, auto avslåing og datahold. Instrumentet overholder IEC 61010-1 CAT III 300V og CAT II 600V og leveres inkludert manualer, batterier, testledninger og gummibeskyttelsesdeksel. Tekniske data: Spenning: 0-6-60-450V AC/DC Nøyaktighet: DC: ±1.2% +5D; AC: ±1.5% +5D Motstand: 0–6 k–60 k–600 k–6 M –40 M Frekvens :10 Hz -100 kHz Kapasitet :0 -100 n -1000 n -10 -2000F Skjerm :3½ siffer Max display :5999 Batteri :3 V CR2032 (inkl.) Størrelse :113x53x10 mm Vekt :78 g

Med denne smarte magnetiske proben vil testledningen automatisk bli festet på målepunktet, uten hjelp fra verktøy osv. Passer inn i en 4mm bananplugg. Overholder IEC 61010-1 CAT III 600V. Tekniske data: Strøm: Maks 2A Diameter: Ø6,6mm. IEC61010: Cat IV 600V, Cat III 1000V

CA PEL 103 er en 3-fase strømenergilogger, utviklet for applikasjoner der du trenger raske og nøyaktige måleresultater. CA PEL 103 er lett å plassere i elektriske tavler på grunn av sin lille størrelse. CA PEL 103 lagrer de målte verdiene på den inkluderte 2 GB Flash-kortet. Du kan også kommunisere med PCen din via USB-kabel, Bluetooth eller Ethernet. Gjennom Ethernet kan CA PEL 103 overvåkes fra hvor som helst du vil. CA PEL103 har en stor bakbelyst trippel digital skjerm som viser alle verdiene. Med CA PEL 103 kan du måle: True RMS-verdier frekvens, strøm og spenning. På installasjoner med både50/60 og400Hzkan du måle VA-, W- og VAR-verdier.VAh, Wh fra enten forsynings- eller forbrukssiden.Cos,Tanog effektfaktor (PF). Crestfaktor.Harmonisk opp til den50.harmoniske.CAPEL 103oppfyllerCATIV600Vog leveres i en pose med4testledninger,krokodilleklemmer,3xMA193strømklemmer(100mAtil10 000A),minneflashkort2GB,USB-adapter,USB-kabel,strømkabel,Multifix-magnet,håndbokogDataview-programvare.Tekniske dataSpenning:0 -1000VAC / DCStraum AC / DC:0 ,005 -10 000 A /0,1 -1 400 A avhengig av strømklemmenFrekvens:50/60 og 400 HzPrøvehastighet:128 ganger per periode (20 ms)Skjerm:Tredobbelt digitalt display LCDBatteri:OppladbarIngress Protection Rating:IP54Størrelse:256x125x37mmVekt :950g

When you make an insulation test on curcuits with elektronical equipment included, you should connect all phases and neutral together, during the measurement. In this way you are shure about, that there will be no potential between the leads, and therefore you will avoid accidents with electronical equipment and sensitive equipment. With the new Easy-ISO it is even more easy to make above written connections, and then make the measurement. Easy-ISO includes four Ø6,6 mm magnetical probes and a 4-pole test lead, which is connected together as one test lead. The magnetical probes are holding the wire fixed automatically on the measuring point, not using any other helping tools. An insulation test is made on an installation with no voltage present. Disconnect eg. on the RCD and connect the Easy-ISO on the downstream on a 4-pole curcuit breaker. If all the groups on the curcuit breaker is on, then you normally is able to measure the hole installation at once. Using this method all the installation is shortedit is important to disconnect Easy-ISO, before turning on the voltage. Elma Easy-ISO leveres i lille taske og opfylder IEC 61010-1 KAT III 600V. Technical data: Current: max 2A IEC61010: Cat III 600V

Elma 6100BT is a rugged true RMS AC/DC mini multimeter equipped with Bluetooth function. The instrument measures current, voltage, frequency, capacitance, resistance and continuity. Furthermore, the instrument provides a custom range for external current clamp, measuring as much as 3000A using the flexible clamp ElmaFlex 430.Using the Bluetooth function and free app, Elma Link, available for both iOS and Android, Elma 6100BT becomes a safe an clever documentation tool. Watch the display directly on your Android/iOS device and perform measurements in safe distance from dangerous voltage. Watch and record all values and trends directly on your phone. Save and attach comments to measurements and share e.g. by mail.Elma 6100BT is equipped with back lit display and bright LED torch light, data hold, max/min and auto power off. The instrument fulfills EN61010-1 CAT III 600V and is delivered with test leads, batteries and manual.Using the Bluetooth function and the free App, Elma Link, available for iOS and Android, Elma 6100BT is an easy tool for documentation. Watch the display on your mobile device and perform the measurements in safe distance from dangerous voltages. Record values and trends on your phone and save with attached photo documentation for easy sharing by mail etc.Elma 6100BT is equipped with a large, back lit display and has built in LED torch light, data hold, max/min and auto power off. The instrument fulfills EN61010-1 CAT III 600V and is provided in bag incl. test leads, batteries and manual.

Elma 9200BT is a rugged TRMS AC/DC clamp meter equipped with build in Bluetooth. The instruments measures current, voltage, frequency, capacity, temperature, duty-cycle, resistance and continuity. Furthermore the instrument has a dedicated setting for external current clamp to measure as much as 3000A AC (Elma flex 430).Using the Bluetooth function and the free App, Elma Link, available for iOS and Android, Elma 9200BT is an easy tool for documentation. Watch the display on your mobile device and perform the measurements in safe distance from dangerous voltages. Record values and trends on your phone and save with attached photo documentation for easy sharing by mail etc.Elma 9200BT is equipped with a large, back lit display and has built in LED torch light, voltage detector, data hold, rel/max/min and auto power off. The instrument fulfills EN61010-1 CAT III 600V and is provided in bag incl. test leads, temperature wire sensor, batteries and manual.

Batteripakke 7,2V NiMH oppladbar for Davo-Meg 1002 og Digi-Meg 1003 (produsert etter 1.1.2004 fra serienummer 38401040116)

Elma TPG 250 gassprøveinstrument som er i stand til å måle opptil 250mbar

Kyoritsu 8035 er en unik ny fase-sekvens tester som viser fase-sekvens/magnetfelt uten elektrisk kontakt. De 3 klipsene monteres på isolasjonen på tre separate faser. Når det er tre virkelige og forskjellige faser, vil instrumentet vise dette med store og svært lyse røde og grønne LED-lys for fase-sekvens. Instrumentet overholder CAT IV 600V, og er derfor sammen med de ekstra lyse LED-lysene svært nyttig for utendørs bruk. Kyoritsu 8035 overholder IEC 61010-1 KAT IV 600V / III 1000V, og leveres i en pose inkludert batterier og manual. Tekniske data: Arbeidsspenning:70-1000V AC Frekvens:45-66 Hz Arbeidstemperatur:-10.....50°C Klipsstørrelse: ø2,4-30mm ledninger Batteri:4x1,5V LR6 (inkludert) Størrelse:112x60x30mm Vekt:380g

Kyoritsu K3132 is a safe small and handy insulation tester, whick complies against even the toughest demands. The instrumentet has following advantages and functions: - Chooseable test voltage 250, 500 og 1000 V - Lockable test not – Then you can have both hands free - Mirror display scale – For safe reading - Built in ohm meter for measuring on earth conenctions - Built in voltage meter 0-600V - Exstra safe and robust – Dust and splashproof IP 54, complies with IEC 61010-1 CAT III K3132 is delivered incl. batteries, test leads and manual. Technical data: Test voltage: 250, 500 og 1000V user choseable Measuring ranges: 0-100, 0-200, 0-400 M Measuring current: > 1mA Ohm meter: 0-3 / 0-500 Measuring current/voltage: > 200 mA / 4 V Voltage meter: 0-600 V AC Battery: 6x1,5V LR06 (inkl.) Size: 106x160x72 mm Weight: 560 g

Elma 3039 er en sann RMS klemmemåler i et praktisk design for enkel måling av både AC- og DC-strømmer. Instrumentet har en ekstra god oppløsning ned til 10mA, stor bakgrunnsbelyst skjerm, smart datahold og automatisk nulljustering. Elma 3039 har lavpassfilter og "Inrush" for måling av innkommende strømmer. Med "Volt sense"-funksjonen er det mulig å oppdage spenning - uten kontakt. Instrumentet overholder IEC 61010-1 CAT III 600V og leveres inkludert batterier og manual. Tekniske data: Strøm AC/DC: 0-60-300A Oppløsning: 0,01-0,1A Nøyaktighet: ±1,5% +5 D Skjerm:3 5/6 sifre Maksimal visning:5999 Klemme størrelse :24 mm Batterier :2x1,5V LR44 (inkl.) Størrelse :147x60x31 mm Vekt :100 g

Type 121039, super tynn testpinne som er ideell for f.eks. multikontakter og andre kontakter der det ikke er mye plass. For montering på 4mm bananstikkontakt, 1000V / 30A. Oppfyller IEC 61010-1 CAT III 1000V.

Elma BM 257 er en ny smart mini-multimeter som gir to nye spennende funksjoner. Auto Check er en intelligent funksjon som automatisk oppdager og velger AC-spennings-, DC-spennings- og kontinuitetstest/motstand. Alt du trenger å gjøre er å slå på instrumentet og måle. Low Z er spenningsmåling med lav impedans, noe som betyr at målepunktet blir belastet, og derfor måler du den virkelige spenningen. Instrumentet har innebygd ikke-kontakt deteksjon av elektriske felt, som kan brukes til å oppdage elektromagnetiske felter fra PC-skjermer eller brukes som en ikke-kontaktspenning-detektor. Elma BM 257 måler sanntidsstrøm, spenning, motstand, frekvens, kapasitet, kontinuitet og temperatur. Elma BM 257 har bakgrunnsbelyst display med analog bargraf for enkel og rask lesing. Instrumentet er utstyrt med automatisk/manuell områdesøking , relativt mål , Peak hold , min/max , datahold and intelligent auto power off . Med PC-kommunikasjonen og Windows-programvaren (ekstra alternativ) kan det lages ON-Line datalogging . Instrumentet er veldig trygtog robust . Det kan håndtere feiltilkoblingeneogerutstyrtmedhøyeffektivsikringer.ComplieswithIEC61010-1CATIII600V.ElmaBM257leveresinkl.rubberbeskyttelse,testledninger,tempertursensor (wire sensor -50 til +250°C), batteri og manual. Tekniske data: Spenning: 0-60m-600m-6-60-600-1000V AC/DC Nøyaktighet: DC: ± 0,5%+2D, AC: ± 1,%+3D Strøm : 0 -500 -5000 -50 m -500 m -5A /10A AC/DC Nøyaktighet : DC : ± 0,5% +3D ,AC :±1,0% +3D Motstand : 06006k606k6M60M (600V) Kapasitet :00606003000F Frekvens10Hz50kHz Temperatur:-501000°C,(inkludert wireprobe,-50250°C) Diode test:01000mV,056mA<1.8VDC Kontinuitetstest:<10akustisk signal Displayet er på3sifreog6desimaler Maks.visning5999 Batteri2x15VL R03(inkl.) Størrelse161 x80 x50mm Vekt340g

The Elma DTR-880A is a smart instrument, perfect for measuring and recording temperatures and relative humidity in environments where monitoring of these parameters is vitally important. The DRT-880A has an extra large display and many applications, such as control of temperature and / or relative humidity in homes, offices, computer rooms, storage rooms, hospitals and laboratories, etc. The instrument is equipped with multi display for displaying both alarms, temperature and relative humidity. The instrument has built-in clock and memory for displaying max / min values of temperature and relative humidity, as well as switching between ° C and ° F. The Elm DTR-880A comes complete with battery, table support and wall mount.

Standard Sensor - Type K Ni-CrNi Tekniske data: Måleområde: -40 .... +250 ° C Nøyaktighet: ± 1,5 ° C Dimensjoner: 1000x2 mm

Type 5004, ekstra kraftig og robust, isolert krokodilleklemme, 1000V / 20A.

Elma BM076 is a robust true RMS clamp meter, which is specially suitable for everybody who works with water, heat and ventilation. With this handy clamp meter is it possible to measure currents up to 600A and the multi meter function makes it possible to measure voltage, frequency, capacity, resistance and continuity. Furthermore the instrument is equipped with temperature measurement, together with a standard type-k probe, makes it possible to measure temperatures on many applications. As something quite new Elma BM076 has build-in 3-lead fase sequence and a smart motor rotation indicator, which is able to help with mounting motors properly. Another new function is VFD, which make the instrument able to measure true values of frequency and voltage after frequency converters. The AmpTip function makes it possible to measure currents from 0-60A with a great accuracy. Elma BM076 has a big backlighted display and is equipped with datahold, peak-hold, max/min/avg, relative function and voltage detector. Elma BM076 is UL listet and complies with IEC 61010-1 CAT IV 300V and III 600V and is delivered in a bag incl. temperature probe (-20 to 250°C), test leads, battery and manual. Technical data:Current with clamp: 0-60-600A ACResolution: 0,01-0,1AAccuracy: ±1,8% + 5DCurrent AmpTip: 0-60,00ACurrent through connections: 0-200-2000microA DCVoltage: 0-600.0V AC/DCFrequency: 5Hz–1000HzTemperature: -40...400°CCapacity: 0-200-2500FResistance: 0-600-6k-60kContinuity test: <100 acustical signalDisplay: 3 5/6 digitMax display: 5999Clamp size: 30mmBattery: 2x1,5V LR03 (incl.)Size: 222x76x37 mm

Blå, bananstikkontakt type 3260 er en serie med IEC 1010 CAT III 1000V 36A plugger, som kan fås i mange typer og farger, alle med sikkerhetsdesign og for bananstikkontakt med en sikkerhetshette. Pluggene monteres i et Ø12 mm hull og strammes på baksiden med en mutter. Type 3265 har gjengerod og to muttere for å feste ledningene. Type 3266 er for flate kontakter eller loddingstilkobling.

Type 6005, for 4 mm bananstøpsel. Tekniske data: IEC 61010: Cat II 1000V

4 mm, fullstendig isolert, hendig format, for 4 mm bananplugg. Tekniske data: IEC 61010: 33V AC / 70V DC

Elma Combitest 425 is an innovative multifunction installation tester capable of carrying out safety tests on civil and industrial electric systems in compliance with IEC/EN61557-1. Furthermore the instrument is a 1 phase energy analyze and is capable of saving results of environmental parameters (illuminance, temperature), leakage current, active power, harmonics, power factor measurements on single phase systems. The resistive TFT color touch-screen display, the icon menues, the on screen help and the userfriendly development make the instrument extremely intuitive even for unskilled users. Its numberless features grant the user a wide range of applications in the world of measurements. The multifunction installation tester Elma Combitest 425 allows saving all measures into an internal memory so transferring the saved data to a PC by means of USB (optional) or built in WiFi interface with an iOS or Android smartphones or tablet . The software supplied among standard accessories allows printing the testing reports. The instrument also drives optional short circuit adapter to carry out high resolution (0.1mOhm) loop/line impedance measurements with prospective short-circuit current calculation. This allows accurate measurements even close to power stations enabling the user to correctly size the protection devices in any system. Further possible tests consist in checking breakdown current, tripping current, I2t relative to breakers (MCB) with curves B, C, D, K and fuses type gG as well as aM and the percentage voltage drop on the main power lines. The test on earth leakage relay tester RCDs up to 10A (with optional accessory) is also possible with the instrument. Through optional clamp it is possible to measure the leakage current.