Elma Instruments Instrumenter - side 4

Type 1060, flerbladet 4 mm bananstøpsel for skrufesting, 36A. Tekniske data: IEC 61010: 33V AC / 70V DC

Rød, bananstikkontakt type 3260 er en serie med IEC 1010 CAT III 1000V 36A plugger, som kan fås i mange typer og farger, alle med sikkerhetsdesign og for bananstikkontakt med en sikkerhetshette. Pluggene monteres i et Ø12 mm hull og strammes på baksiden med en mutter. Type 3265 har gjengerod og to muttere for å feste ledningene. Type 3266 er for flatekontakter eller lodding.

Elma 608 er en enkel og liten IR-temperaturmåler laget i praktisk pennestørrelse - passer rett i skjortelommen. Instrumentet måler overflatetemperaturer uten kontakt. Enkelt og raskt. Elma 608 er utstyrt med unik sirkulær lasermarkering, som gjør området for måling tydelig synlig. Videre er instrumentet utstyrt med min / max / hold-funksjon og en klar, bakgrunnsbelyst skjerm. Instrumentet leveres klart til bruk inkludert batterier.

Testprobe for tilkobling i enden av en testledning med bananstikk. Spesielt egnet for bruk i flerinstallasjonstestere. Tekniske data: IEC 61010: CAT II 1000V (uten beskyttelseshette), CAT IV 600V (med beskyttelseshette)

5,7064454104e+12

CA PEL 103 er en 3-fase strømenergilogger, utviklet for applikasjoner der du trenger raske og nøyaktige måleresultater. CA PEL 103 er lett å plassere i elektriske tavler på grunn av sin lille størrelse. CA PEL 103 lagrer de målte verdiene på den inkluderte 2 GB Flash-kortet. Du kan også kommunisere med PCen din via USB-kabel, Bluetooth eller Ethernet. Gjennom Ethernet kan CA PEL 103 overvåkes fra hvor som helst du vil. CA PEL103 har en stor bakbelyst trippel digital skjerm som viser alle verdiene. Med CA PEL 103 kan du måle: True RMS-verdier frekvens, strøm og spenning. På installasjoner med både50/60 og400Hzkan du måle VA-, W- og VAR-verdier.VAh, Wh fra enten forsynings- eller forbrukssiden.Cos,Tanog effektfaktor (PF). Crestfaktor.Harmonisk opp til den50.harmoniske.CAPEL 103oppfyllerCATIV600Vog leveres i en pose med4testledninger,krokodilleklemmer,3xMA193strømklemmer(100mAtil10 000A),minneflashkort2GB,USB-adapter,USB-kabel,strømkabel,Multifix-magnet,håndbokogDataview-programvare.Tekniske dataSpenning:0 -1000VAC / DCStraum AC / DC:0 ,005 -10 000 A /0,1 -1 400 A avhengig av strømklemmenFrekvens:50/60 og 400 HzPrøvehastighet:128 ganger per periode (20 ms)Skjerm:Tredobbelt digitalt display LCDBatteri:OppladbarIngress Protection Rating:IP54Størrelse:256x125x37mmVekt :950g

The EASYTEST kit, is a combination of a tone transmitter and a inductive trace probe. The trace probe is easy to use and solves problems in searching, identifying and trace cable installations. EASYTEST is able to find insulated cables on distances up to 60 cm, and is able to follow the cables up to 15 km. The instrumentet is able to trace/finding cables, split pairs, pairs, reversed pairs, short curcuits, disconnected leads and more. EASYTEST is an ideal instrument for the telecommunication/network installer tracing a single wirepair, the alarm installer who has to trace the cable route to the alarm system, the electrical installer who has to trace the cabling in a building and more. EASYTEST is used a vary of apllications where it is not possible to find a cable/wire phusical or visual. EASYTEST is even more equipped with two Talk-sets and is therefore able to use two way communication in systems up to 15 km. a very userable feature in places, where it s not possible to use walkie-talkies or mobile phones. Easytest Protect test kit is a further development of the known Easytest Classic Kit (desciption above). The instrumentet is having a lot of new functions eg. is it possible to see if data ports is connected. With the trace probe is it possible to detect ISDN/ADSL lines. Easytest Protect emits a sine signal with can cause in reduced "Crosstalk", and it is therefor possible to trace on live telephone cables. Easytest Protect can be connected through the integrated RJ 11, RJ 45 or ther included crocodile clips. Technical data: Voltage protection: 110V AC/240V DC Range: 15 km Battery transmitter: 1x9V 6F22 (excl.) Battery probe: 1x9V 6F22 (excl.) Size/weight transmitter: 68 x 96 x 25 mm / 150 g Size/weight probe: 220 x 40 x 25 mm / 80 g

Kyoritsu K3131 insulation tester is a safe and robust instrument, and it has a lot of advantages as: - User chosen withstanding voltage 250, 500 og 1000V - Lockable test not - Then you can have both hands free - Backlighted scale - Easy to read - Warning in dangerous voltage - For extra safety - Built in ohm meter - For measuring on earth connections an earth leads (for safety) - Produced after ISO 9001. - Protected with built in fuse. K3131 are working on behalf on the the constant current prociple, meams that the test current is unchanged on changed loads. K3131 demands IEC 61010-1 KAT III 600V and is delivered i a robust housing incl. pouch, test leads, manual and batteries. Technical data: Withstand voltage: 250,500 og 1000V - user choseable Mesuring range: 0-100M, 0-200M, 0-400M Measuring current: Konstant>1mA Resistance measuring: 0-2-20 Test voltage: 9V/200mA Battery: 6x1,5V LR6 (incl.) Size: 186x167x89 mm Weight: 640 g

Kyoritsu K3132 is a safe small and handy insulation tester, whick complies against even the toughest demands. The instrumentet has following advantages and functions: - Chooseable test voltage 250, 500 og 1000 V - Lockable test not – Then you can have both hands free - Mirror display scale – For safe reading - Built in ohm meter for measuring on earth conenctions - Built in voltage meter 0-600V - Exstra safe and robust – Dust and splashproof IP 54, complies with IEC 61010-1 CAT III K3132 is delivered incl. batteries, test leads and manual. Technical data: Test voltage: 250, 500 og 1000V user choseable Measuring ranges: 0-100, 0-200, 0-400 M Measuring current: > 1mA Ohm meter: 0-3 / 0-500 Measuring current/voltage: > 200 mA / 4 V Voltage meter: 0-600 V AC Battery: 6x1,5V LR06 (inkl.) Size: 106x160x72 mm Weight: 560 g

Testprobe svart = 140mm

Batteripakke 7,2V NiMH oppladbar for Davo-Meg 1002 og Digi-Meg 1003 (produsert etter 1.1.2004 fra serienummer 38401040116)

Elma 315 humidity/thermometer

Standard 16A CEE-plugg med innebygd fase / roterende felttester med LED-indikasjon på riktig / feil installasjon og mangel på fase / nøytral / jord. Det perfekte testverktøyet for alle brukere av CEE-plugger

Elma 9200BT is a rugged TRMS AC/DC clamp meter equipped with build in Bluetooth. The instruments measures current, voltage, frequency, capacity, temperature, duty-cycle, resistance and continuity. Furthermore the instrument has a dedicated setting for external current clamp to measure as much as 3000A AC (Elma flex 430).Using the Bluetooth function and the free App, Elma Link, available for iOS and Android, Elma 9200BT is an easy tool for documentation. Watch the display on your mobile device and perform the measurements in safe distance from dangerous voltages. Record values and trends on your phone and save with attached photo documentation for easy sharing by mail etc.Elma 9200BT is equipped with a large, back lit display and has built in LED torch light, voltage detector, data hold, rel/max/min and auto power off. The instrument fulfills EN61010-1 CAT III 600V and is provided in bag incl. test leads, temperature wire sensor, batteries and manual.

Terminator Kit 2-4 for Elma 45

ELMA CM01 har en liten klemmemåler i et veldig praktisk design. Instrumentet har overlegen oppløsning og både 3 3/4-sifret display og analog stolpediagram. ELMA CM01 er utstyrt med automatisk nulljustering, min / max-minne, datahold og måler strøm AC / DC, spenning AC / DC, motstand, frekvens og kontinuitet. Instrumentet oppfyller IEC 61010-1 CAT II 600V og CAT III 300V og leveres komplett i pose inkludert testledninger, batteri og bruksanvisning. Tekniske data: Strøm AC / DC: 0-40-200A Oppløsning: 0,01 til 0,1 A Nøyaktighet: ±1% +2D Spenning AC / DC: 0-400V Motstand: ​​0-400 Frekvens: ​​0-1000kHz Display :3 sifre på fire sifre Maks visning :3999 Klemmebredde :24 mm Batteri :2x1 ,5 V LR6 (inkl.) Dimensjoner :180x50x29 mm Vekt :200 g

5,7033174717e+12

Digital stoppeklokke med lap, 1/100 s, dato- og klokkefunksjon. Stoppeklokken har et praktisk design og er blant annet ment for tidtaking ved lekkasjetesting av gassinstallasjoner.

Kyoritsu KEW is a unique instrument for measurement of low DC currents, typically found in process industry, where it is essential to measure control current signals, without breaking the loop. The instrument is equipped with a tiny current clamp, making KEW2500 ideal for measurements in even inaccessible spaces.KEW 2500 is equipped with back lit dual display, with large digits, to read current directly in mA simultaneously with 0-100% in 4-20mA range. The instrument is furthermore equipped with LED flashlight, analogue output, for external logging, auto zero and data hold. The instrument measures current in a wide and accurate range from 0.01 to 120.0 mA.Kew 2500 fulfills IEC 61010-1 CAT II 300V and is supplied ready to use incl. bag, batteries and manual.

The EASYTEST kit, is a combination of a tone transmitter and a inductive trace probe. The trace probe is easy to use and solves problems in searching, identifying and trace cable installations. EASYTEST is able to find insulated cables on distances up to 60 cm, and is able to follow the cables up to 15 km. The instrumentet is able to trace/finding cables, split pairs, pairs, reversed pairs, short curcuits, disconnected leads and more. EASYTEST is an ideal instrument for the telecommunication/network installer tracing a single wirepair, the alarm installer who has to trace the cable route to the alarm system, the electrical installer who has to trace the cabling in a building and more. EASYTEST is used a vary of apllications where it is not possible to find a cable/wire phusical or visual. EASYTEST is even more equipped with two Talk-sets and is therefore able to use two way communication in systems up to 15 km. a very userable feature in places, where it s not possible to use walkie-talkies or mobile phones. Easytest can be conencted via the RJ 11 connector or the supplied crocodile clips. Technical data: Voltage protection: 110V AC/240V DC Range: 15 km Battery transmitter: 1x9V 6F22 (excl.) Battery receiver: 1x9V 6F22 (excl.) Size/weight transmitter: 68 x 96 x 25 mm / 150 g Size/weight receiver: 220 x 40 x 25 mm / 80 g

5,70331766e+12

Kimo ventilasjonssett, inkludert 1 stykke VT110 hotwire anemometer + 1 stykke K35 luftstrømkone.

Elma 3039 er en sann RMS klemmemåler i et praktisk design for enkel måling av både AC- og DC-strømmer. Instrumentet har en ekstra god oppløsning ned til 10mA, stor bakgrunnsbelyst skjerm, smart datahold og automatisk nulljustering. Elma 3039 har lavpassfilter og "Inrush" for måling av innkommende strømmer. Med "Volt sense"-funksjonen er det mulig å oppdage spenning - uten kontakt. Instrumentet overholder IEC 61010-1 CAT III 600V og leveres inkludert batterier og manual. Tekniske data: Strøm AC/DC: 0-60-300A Oppløsning: 0,01-0,1A Nøyaktighet: ±1,5% +5 D Skjerm:3 5/6 sifre Maksimal visning:5999 Klemme størrelse :24 mm Batterier :2x1,5V LR44 (inkl.) Størrelse :147x60x31 mm Vekt :100 g

Leica DISTOTM D110 er verdens minste laseravstandsmåler med integrert Bluetooth® Smart-teknologi. Ved å bruke dens presise målinger kan brukere enkelt lage plantegninger og skisser ved å koble den til Leica DISTOTM sketch-appen på en smarttelefon eller et nettbrett. Enten du er interiørdesigner, maler eller byggentreprenør, vil Leica DISTOTM D110 gjøre det lettere å få jobben gjort riktig. Avstands- og arealmåling, Bluetooth® Smart, IP 54 støv- og sprutbeskyttelse, avtakbar lommeclips

The Elma DTR-880A is a smart instrument, perfect for measuring and recording temperatures and relative humidity in environments where monitoring of these parameters is vitally important. The DRT-880A has an extra large display and many applications, such as control of temperature and / or relative humidity in homes, offices, computer rooms, storage rooms, hospitals and laboratories, etc. The instrument is equipped with multi display for displaying both alarms, temperature and relative humidity. The instrument has built-in clock and memory for displaying max / min values of temperature and relative humidity, as well as switching between ° C and ° F. The Elm DTR-880A comes complete with battery, table support and wall mount.