Schneider Electric Komponenter for switchboxes og skap - side 6

Schneider Electric iC40N strømkretsbryter 3P + N

Automatisk sikringsbryter - MCB Automatiske sikringsbrytere som kombinerer følgende funksjoner: Kretsbeskyttelse mot kortslutningsstrømmer, kretsbeskyttelse mot overbelastningsstrømmer

This Acti9 iC60N is a low voltage miniature circuit breaker (MCB). It is a 2P circuit-breaker with 2 protected poles, 32A rated current and C tripping curve. It can be mounted on DIN rail for modular installation. As circuit-breaker, its breaking capacity, according to IEC/EN 60898-1, is 6000A at 400VAC. As circuit-breaker, its breaking capacity, according to IEC/EN 60947-2, is 20kA at 230VAC and 10kA at 400VAC. This miniature circuit breaker protects circuits against short circuit and overload currents. It has an IP20 degree of protection (as per IEC/EN 60529) on its terminals. It becomes IP40 once in modular enclosure with insulation class II. its fast closing mechanism improves its service life. Its limitation class 3 (according to EN/IEC60898-1) improves downstream circuit protection cost. Its unique Visitrip indicator reduces intervention time by showing the faulty circuit. Its Visisafe green strip guarantees the physical opening of the contacts to allow downstream maintenance.

iC60N - miniature circuit breaker - 2P - 13A - C curve

Kamskinne - Enkel å kutte - Acti 9 balansert 4 poler 57 moduler 100A

iC60N - miniatyrkretsbryter - 2P - 4A - D-kurve

Schneider Electric A9F07216 strømkretsbryter 2

tidlig-bryt/sen-lag auxiliary kontaktblokk - VARIO - 1 NO + 1 NC

Schneider Electric LC1D32B7 hjelpekontakt

Schneider Electric A9F04702 strømkretsbryter 3

iC60N - miniatyrkretsbryter - 1P + N - 25A - C-kurve

Schneider Electric GV2G445 sikkerhetssikring 63 A 1 stykker

TeSys K kontaktor - 3P(3 NO) - AC-3 - <= 440 V 12 A - 24 V DC spole

3 phase Kilowatt-hour meter for DIN rail mounting. measuring in 4 quadrants, multiple tariffs with counter and Modbus communications, digital I / O and MID certified.This model provides a direct measurement of I, D, P, Q, S, and E up to 63A. without CTs o

grensesnitt plug-in relé - Zelio RSB - 2 C/O - 12 V DC - 8 A

Schneider Electric GV2G

TeSys GV3-Sikringsbryter-termisk-magnetisk - 37...50A - EverLink BTR-kontakter

iC60H - miniatyrkretsbryter - 4P - 10A - C-kurve

TeSys U standard control unit to be inserted in a power base LUB12 or LUB32 to form a TeSys U starter controller, for 3-phase motor applications up to 1.5kW@400V. It provides full protection for motors with a rated current Ir 1.25-5A (Ir adjustable), overload tripping class 10, short circuit at 13 x Irmax, overcurrent at 14.2 x Ir, phase loss, insulation fault (protection of equipment only). Control unit to be supplied with 24V DC through the control terminal block located in the power base. Certified when used in conjunction with a LUB power base (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh).

Schneider Electric iCV40N strømkretsbryter 1P + N

TeSys D termiske overbelastningsreleer - 1,6...2,5 A - klasse 10A

Schneider Electric LC1DT20BD hjelpekontakt

TeSys GV2-Sikringsbryter-termisk-magnetisk-1,6...2,5 A-skrueterminaler

Zelio RXG are a series of plug-in relays with a width of only 16 mm and robust faston connectors which is compatible with similar relays from other vendors. The relays are available with 1 C/O contact with 10A or 2 C/O contacts with 5A maximum load and it is possible to get them with or without lockable testbutton and status LED.A protection module (diode, varistor or RC-circuit) can be inserted into the socket if needed.The sockets RGZE1S35M and RGZE1S48M has separate terminals for supply and load which simplify troubleshooting and mounting of the relays.RGZE1S48M is a socket with separate terminals that fits with RXG relays with 2 C/O contacts.The socket has a width of 16 mm and protection modules can be inserted directly next to the supply terminals.The integrated holding clip protect the relay from falling out when inserted into the socket.The RGZE1S48M fits all RXG2xxx plug-in relays with 2 C/O contacts.Additional marking of the socket can be done with the RSZL300 legend

Schneider Electric TeSys GV2 strømkretsbryter 3