Schneider Electric Komponenter for switchboxes og skap - side 8

3 phase Kilowatt-hour meter for DIN rail mounting. measuring in 4 quadrants, multiple tariffs with counter and M-bus communications, digital I / O and MID certified.This model provides a direct measurement of I, D, P, Q, S, and E up to 1 / 5A (depending o

TeSys D - hjelpekontaktblokk - 2 NO + 2 NC - skrueklemmetilkoblinger

Schneider Electric A9F94210 strømkretsbryter 2

Zelio RSB are a series of compact plug-in relays with a width of only 16 mm.The relays are available with 1 C/O with either 12 and 16A or 2 C/O contacts with 8A maximum load.It is possible to insert a protection module (diode, varistor or RC-circuit) into the relay socket if needed.The sockets RSZE1S35M and RSZE1S48M has separate terminals for supply and load which simplify troubleshooting and mounting of the relays.RSB2A080BDPV is a complete plug-in relay mounted into a RSZE1S48M socket with a maintaining clamp, which secure that the relay stays in the socket even in an environment with vibrations.The socket has a blocking diode for protection against reversed polarity.The diode module has also a build-in LED for indication of supply to the relay.RSB2A080BDPV has 2 C/O AgNI contact with a maximum load of 8A.The relay has a lifetime of 100.000 cycles (depending on load).Supply voltage to the RSB2A080BDPV is 24 VDC and average coil consumption is 0,45W.Minimum switching curr

TeSys GV2-Sikringsbryter-termisk-magnetisk-0,1...0,16 A -skrueterminaler

TeSys GV2-Sikringsbryter-termisk-magnetisk - 1,6...2,5 A - skrueterminaler

IEC / EN 60947-2IEC / EN 60898-1I henhold til de ovennevnte standardene:Kretsbrytere kombinerer følgende funksjoner:- kretsbeskyttelse mot kortslutningsstrømmer- kretsbeskyttelse mot overbelastningsstrømmer,- egnet for isolasjon

Schneider Electric iC40N strømkretsbryter 1P + N

Schneider Electric LC1D115P7 hjelpekontakt

Acti9 iID B type EV RCCB provides:- protection of persons from electrical shock by direct contact (30 mA),- Protection of persons against electrical shock by indirect contact,- protection of fire-fighting installations.- Type BActi9 iID B type EV RCCB provides:- protection in case of a continuous earth fault power on the networkgenerated by electric car charging station.- It can be used for use of Acti9 iID B type EV breakercompulsory, according to applicable standards in the country.- Acti9 iID B type EV is compatible with Schneider Electric A fault current switchParallel or series connected in the installation, after coordination tables.

Schneider Electric A9C20132 hjelpekontakt

Acti 9 - MINs - lydløs elektronisk timer - justerbar fra 0,5 til 20 minutter

grensesnitt plug-in relé - Zelio RSB - 2 C/O - 24 V AC - 8 A

TeSys D - tidsforsinket hjelpekontaktblokk - 1NO + 1NC - skrueterminaler

4 koblinger - 25..95 mm2

Schneider Electric A9C20864 hjelpekontakt

C120N - strømbryter - 4P - 100A - C-kurve

TeSys innkapslede startertilbehør, nødstopp trykknapp. Sopphode stopp trykknapp, Ø 40 mm, rød, med låsestilling og frigjøring ved å vri på den, levert med en IP55 tetningssett GV2E01. Skal monteres på tomme kabinetter LE1GVMEK, GV2MP, GV2MC (unntatt GV2MCK04 allerede utstyrt) for bruk med termomagnetiske brytere GV2ME (må bestilles separat). Green Premium-kompatibel (RoHS / REACh).

Schneider Electric TeSys K control relay elektrisk relé Sort, Hvit

Schneider Electric A9F03104 strømkretsbryter Miniatyr-automatsikring 1

Interpact kretsbryter 4P

Schneider Electric A9C20844 hjelpekontakt

Schneider Electric A9F04613 strømkretsbryter 1

This Resi9 is a modular residual current breaker with overcurrent protection (RCBO). It is a 3P+N circuit breaker with 3 protected pole and 20A In rated current and C tripping curve. The earth leakage protection class is A type with a sensitivity of 30mA. The earth-leakage protection time delay is instantaneous. The Icn rated short circuit breaking capacity is up to 6000A according EN/IEC 61009-2-1 standard. This product protects against short circuit, cable overload, electrical shock by indirect contact and fire hazards. It brings safety, reliable solution for commercial and industrial applications with high breaking capacity. This product is compliant with EN/IEC 61009-2-1 standard. It has an electrical endurance going up to 7500 cycles and a mechanical endurance going up to 20000 cycles. The Ue operational voltage is 400VAC. It is DIN rail mountable. The width in 9mm pitches is 10. The product color is white (RAL9003). The dimensions are (W) 90mm x (H) 91mm x (D) 72.5mm. The weight is 500g. It has an IP20 degree of protection (as per IEC/EN 60529 standard) and becomes IP40 once in modular enclosure. The operating temperature is from -25°C to -60°C.

It is an extended rotary handle for ComPacT NSX 100/160/250, PowerPact Multistandard H/J frames and EasyPact CVS 100/160/250 devices. It is suitable for isolation and it is used for standard applications. It maintains the access to trip unit settings and to the push to trip button. It is equipped with a standard black handle. There is an indication of the three device positions O (OFF), I (ON) and tripped. This extended version makes possible to operate devices installed at back of switchboards, from the switchboard front. The distance between the back of the circuit breaker and the switchboard door is from 185mm to 600mm. The degrees of protection are IP55 and IK08. This rotary handle is padlockable in the OFF position using 1 to 3 padlocks not supplied (shackle diameter 5 to 8mm). As an option, it is possible to install a Ronis or Profalux keylock on the base of the handle to obtain the same function as with a padlock.