Tilta - side 4

This Canon LP-E6 dummy battery to 3-pin Fischer cable was designed to be used with (although not exclusively) the Tilta Universal Battery Plate. It allows you to power cameras that use Canon LP-E6 batteries as well as Canon LP-E6 power-based accessories through a 3-pin Fischer power port.

This power supply system is designed to allow for external power on DSLR and mirrorless cameras. The battery plate comes with a DC Female to Canon LP-E6 which is then connected to an 8V DC cable that plugs into the plate to provide your camera with power. It comes mounted to a 15mm LWS rod adapter for use on 15mm LWS rod systems and comes in both V-mount and gold mount versions.

This Mounting Plate attaches near the bottom of the Full Camera Cage for RED V-RAPTOR.

It offers some additional ¼”-20 mounting points with locating pins and serves as an alternative location to mount the Advanced I/O Module.

NOTE: Access to the media door will be limited when using this plate.

This Top Handle attaches to both the Top Plate and Front Top Plate for RED V-RAPTOR which creates a secure point of contact for handling and operating your camera while also providing additional mounting points for accessories.

This Top Handle features both 1/4”-20 and 3/8”-16 mounting points with locating pins as well as one cold shoe receiver.

This Handle mounts to our Top Plates via four ¼”-20 screws for improved security especially when supporting heavier camera builds.

This Handle can also be broken down into a more compact configuration that only requires the Front Top Plate to mount in order to better accommodate lightweight camera builds.

The newly designed 15mm rod mount allows you to mount a single 15mm rod either parallel or perpendicular to the Top Handle, allowing for more flexibility when mounting electronic viewfinders or external monitors.

This Extension Accessory for RED V-RAPTOR allows you to extend your Top Handle which offers additional mounting points and increased flexibility when handling.

This Extension includes a removable section that further extends the handle if needed to accommodate larger batteries.

The curved design of this handle extension is a great option for expanding ways in which you can operate the camera particularly at lower angles.

Arm your camera with this Tilta camera cage specifically designed for the Sony Venice Rialto. It provides a high quality aluminum, CNC-milled protective armor for the sensor block of the camera that has several ¼”-20 and ⅜”-16 mounting points for attaching accessories. A battery plate (available in either gold mount or V-mount) can be mounted to the back of the sensor block. This then sends power to a 3-pin Fischer and 2-pin Lemo port on the front of the cage to allow you to power accessories. The included 3-pin Fischer cable sends communication from the camera’s 3-pin communication port to a 3-pin Fischer port on the back of the cage (facing the operator), which then sends R/S functionality to a 3-pin R/S port on the front of the cage.

- Custom Designed for the Sony Burano 8K Digital Cinema Camera
- Mounting Points Include Arri Standard Rosettes, 1/4"-20 and 3/8"-16 Threads, Both with Locating Points
- Side Mounting Plate Provide Additional Mounting Options for Accessories like Wireless Video Transmitters
- 15mm Baseplate Supports 15mm LWS Rods and Accessories like Matte Boxes and Follow Focus Systems
- EVF Bracket Offers Greater Flexibility for Tilting and Rotating the Camera's EVF

This Battery Plate adapts the Sony Burano’s integrated V-Mount Battery Plate to either a Gold Mount or V-Mount Battery Plate with additional power outputs.

This expands users’ options for distributing power as well as provides a convenient power input that accommodates DC power for hot swapping.

This Battery Plate includes the following power outputs:

(1) 6-Pin LEMO DC Input (12V-28V)
(1) P-Tap Port (14.8V 3.8A)
(1) USB-C Port ( PD3.1 65W )
(1) 3-Pin Fischer Lemo (24V 3 A)
(1) 3-Pin Fischer Lemo (14.8V 3.8 A)
(1) 2-Pin Lemo (14.8V 3 A)

This bracket attaches to the front of the RED V-RAPTOR camera body to provide support for an LPL Lens Mount Adapter.

This support attaches via multiple threads for increased security via four points of contact.

This accessory is the perfect solution for adding increased security to your LPL Adapter, allowing you to support heavier full frame lenses and take advantage of the entire V-RAPTOR 8K Sensor

- Custom Designed for the Sony Burano 8K Digital Cinema Camera
- Mounting Points Include Arri Standard Rosettes, 1/4"-20 and 3/8"-16 Threads, Both with Locating Points
- Side Mounting Plate Provide Additional Mounting Options for Accessories like Wireless Video Transmitters
- 15mm Baseplate Supports 15mm LWS Rods and Accessories like Matte Boxes and Follow Focus Systems
- Top Plate Provides Mounting Options and Full Compatibility with Original Top Handle

- Custom Designed for the Sony Burano 8K Digital Cinema Camera
- Mounting Points Include Arri Standard Rosettes, 1/4"-20 and 3/8"-16 Threads, Both with Locating Points
- Side Mounting Plate Provide Additional Mounting Options for Accessories like Wireless Video Transmitters
- 15mm Baseplate Supports 15mm LWS Rods and Accessories like Matte Boxes and Follow Focus Systems
- Top Plate Provides Mounting Options and Full Compatibility with Original Top Handle

These cables for the Nucleus-M give you run/stop capabilities in camera systems that support it. Simply plug the 7-pin end of the cable into one of the motors and the other end into the R/S port of the camera.

Note that this cable was specifically designed for the Nucleus-M so the R/S function only works with the Nucleus-M’s own hand unit and hand grips.

Weight: 0.09lbs
Length: 68.6cm
Color: Black
Materials: Copper, rubber, aluminum-alloy

This backing for the MB-T12 matte box allows you to clamp the matte box onto lenses within a given front diameter.

Introducing the Rotatable EVF Bracket for Sony BURANO, the perfect option for improving the flexibility of the camera’s Electronic Viewfinder.

This Bracket mounts to the Top Handle included with our Full Camera Cage for Sony Burano via a 15mm Rod Mount, as well as the Burano’s original Top Handle.

The other end of the bracket features a mount for the camera’s EVF which can tilt and rotate in order to better position the viewfinder.

This mount is also able to be adjusted closer or further to the rod mount in order to accommodate various configurations.

This backing for the MB-T12 matte box allows you to clamp the matte box onto lenses within a given front diameter.

This backing for the MB-T12 matte box allows you to clamp the matte box onto lenses within a given front diameter.

This 19mm studio-compatible lens support prevents sagging of heavy lenses – which can cause misalignment of the image on the sensor – and twisting of lenses when using a strong follow focus motor. Simply mount the 19mm Pro Lens Support onto 19mm studio rods under the lens’ ⅜”-16 screw hole and secure the support screw to the lens.

Marking Disks for FF-T04/FF-T05 Single/Dual Sided DSLR Follow Focus

This 4×5.65 carbon fiber matte box is designed to clamp directly onto standard sized cinema lenses in order to be as lightweight and unobtrusive as possible.

It includes multiple lens adapter rings to fit most standard front diameters sizes.

Additional sized backings can be purchased separately.

These adapter rings not only allow the matte box to directly attach to the lens, but it forgoes the need for lens donuts.

Included in the package is one top French flag to provide flare protection.

It also includes an 15mm rod attachment if you wish to mount the matte box via LWS rods.

This dual-sided follow focus has a 1:1 hand wheel-to-gear ratio for extremely accurate focus pulls. The dual-sided design allows you to adjust your lens’ focus from either side of the camera. It attaches to both 15mm LWS and 19mm rod supports by snapping onto the rods. This allows you to adjust, mount and remove it without the need to remove other accessories that are also mounted onto the rods (such as matte boxes and lens supports). The gear is attached to a swivel that allows you to rotate it against the lens for a tight fit. You can also slide the whole unit from side-to-side, allowing you to easily adjust to fit any size of lens.

This backing for the MB-T12 matte box allows you to clamp the matte box onto lenses within a given front diameter.

This backing for the MB-T12 matte box allows you to clamp the matte box onto lenses within a given front diameter.

This backing for the MB-T12 matte box allows you to clamp the matte box onto lenses within a given front diameter.

This backing for the MB-T12 matte box allows you to clamp the matte box onto lenses within a given front diameter.

This lens attachment ring for the MB-T04 and MB-T06 matte boxes attaches directly to the back of the matte box and snugly fits lenses with 134mm outer diameters in order to ensure complete flare control.