Tilta - side 5

This custom lanyard attaches to the Nucleus-M hand unit to allow you to always keep it close to your body during hectic times on set.

Tilta MB-T15-72 camera filter tilbehør Filterholder-adapterring

This adapter ring for the Tiltaing Mini Clamp-on Matte Box is designed for lenses with a 82mm front diameter. You first attach the adapter ring to your lens and then the matte box clamps onto the adapter ring.

Also, screw-on filters of the same diameter can be attached via the threading that’s on the inside of the adapter ring.

Tilta MB-T15-C85 camera filter tilbehør Step down-ring (filter)

The Wireless Motor for Tilta Mirage mounts directly to the 95mm Variable ND Module and allows you to remotely adjust the VND with the Wireless Controller for Mirage.

The motor is also compatible with the Nucleus M FIZ, Hand Grips, Nucleus Nano Hand Wheel, and Side Focus Handles.

The Motor powers via USB-C or the included 14500 Power Supply .

This 15mm Carbon Fiber Rod Set is the perfect option for users looking for lightweight LWS rods without sacrificing performance.

This set includes two carbon fiber rods which can be mounted to any LWS standard baseplate or 15mm rod holder in order to accommodate accessories such as follow focus system and matte boxes.

These rods are constructed using new manufacturing techniques that prevent them from degrading over time and feature a UV-Resistant Coating that keeps the matte black finish looking new after extended use.

This 1/4″-20 to Arri rosette attachment was designed specifically with the Panasonic GH Series and Sony a7/a9 Series of Tiltaing Camera Cages in mind. It allows you to mount an Arri rosette attachment to your rig via two 1/4″-20 mounting screws. The slot for the 1/4″-20 screws allows you easily adjust the attachment based on where the screw holes are located on the cage.

This 15mm Carbon Fiber Rod Set is the perfect option for users looking for lightweight LWS rods without sacrificing performance.

This set includes two carbon fiber rods which can be mounted to any LWS standard baseplate or 15mm rod holder in order to accommodate accessories such as follow focus system and matte boxes.

These rods are constructed using new manufacturing techniques that prevent them from degrading over time and feature a UV-Resistant Coating that keeps the matte black finish looking new after extended use.

This 15mm Carbon Fiber Rod Set is the perfect option for users looking for lightweight LWS rods without sacrificing performance.

This set includes two carbon fiber rods which can be mounted to any LWS standard baseplate or 15mm rod holder in order to accommodate accessories such as follow focus system and matte boxes.

These rods are constructed using new manufacturing techniques that prevent them from degrading over time and feature a UV-Resistant Coating that keeps the matte black finish looking new after extended use.

This Side Handle Attachment allows you to mount your Advanced Left Side Wooden Handle via a NATO Rail Connection.

This is the perfect option for our RED Raptor Cage, RED Komodo Cage, or any other camera cage that features a NATO Rail.

This attachment type can also be adapted to work with almost any cage via the included 36mm NATO Rail Attachment that can mount via 1/4″-20.

This Side Handle Attachment allows you to mount your Advanced Left Side Wooden Handle via a NATO Rail Connection.

This is the perfect option for our RED Raptor Cage, RED Komodo Cage, or any other camera cage that features a NATO Rail.

This attachment type can also be adapted to work with almost any cage via the included 36mm NATO Rail Attachment that can mount via 1/4″-20.

Packing list:
(1) Tiltaing Side Handle Attachment Type I
(4) Screws

This articulating arm is the perfect option for mounting accessories to your camera cage such as external monitors, wireless video transmitters, electronic viewfinders and more.

The articulating nature of this arm along with a single tie down lock for all axes means users can easily re-position accessories on the fly which is especially helpful in fast paced shooting environments.

Weighing in at only 11oz, this arm can support up to 11lbs which makes it the strongest articulating arm in our current lineup.

The arm comes in two variations, one that features two NATO Receivers on each end and one that features two 1/4″-20 screws with locating pins .

This case is the perfect solution for transporting the Mirage Matte Box, Illusion Series Filters and various accessories.

This case features two options: one that can accommodate the matte box as well as filters and another that accommodates only filters.

The case is made of high-quality material, featuring a high strength, reinforced design to withstand heavy pressure without deformation.

The modular design and large capacity for storing various filters and accessories is perfect for everyday use.

This Power Supply Module is the perfect mounting and power solution for the DJI Video Transmitter.

The front and back plates of the module can be installed on both sides of the video transmitter.

The front side of the module allows you to mount your DJI Video Transmitter to a Gold/V-Mount Battery Plate on your camera system.

The back side then allows you to mount a Gold or V-Mount battery to the transmitter which can provide power to the transmitter as well as pass power through the module to the camera body.

This is a fantastic option for those who are looking for a clean and convenient way to mount and power the DJI transmitter.

Tilta MB-T16-DCF camera filter tilbehør Filterholder-adapterring

This case is the perfect solution for transporting the Mirage Matte Box, Illusion Series Filters and various accessories.

This case features two options: one that can accommodate the matte box as well as filters and another that accommodates only filters.

The case is made of high-quality material, featuring a high strength, reinforced design to withstand heavy pressure without deformation.

The modular design and large capacity for storing various filters and accessories is perfect for everyday use.

This Gold Mount Battery Plate attaches directly to the Basic or Advanced Ring Grip for RS 2 on either side of the gimbal body.

This plate allows you to power your gimbal and accessories with higher capacity Gold Mount batteries without external cables.

NOTE: the orientation of this plate only supports Gold Mount batteries less than 115mm in length and less than 60mm thick.

This Plate is primarily designed for using Micro Gold Mount batteries or for mounting larger Gold Mount batteries to the top of the Ring Grip.

The Universal Quick Release Shoulder Pad is fast and convenient. It allows for any camera with either a Tilta standard or Arri standard baseplate to slide and lock in for run-and-gun shoulder mounted set-ups without the need to screw on additional baseplates. It comes with two dovetail-style plates: one that is Tilta standard and one that is Arri standard so depending on your plate system, you can have your normal dovetail attached to your tripod and then quickly and easily slide off of that and onto the shoulder pad?s plate to be ready for handheld in no time. The pad is sturdy and firm yet very comfortable during operation.

This Extension Plate is what users will need to adapt the Full Camera Cage for Sony Burano to the 19mm Studio Tilta Standard to Arri Standard Multi-Functional Baseplate.

This plate mounts onto the 19mm Studio Multi-Functional Baseplate via four screws which provides an incredibly secure connection.

The tracks on the top of this plate are compatible with the 15mm Baseplates included with the Burano’s Camera Cage.

This provides a convenient and secure way to use the Sony Burano with 19mm Studio Rods as well as Arri Dovetails.

This sleek, rugged Arri standard dovetail allows you to mount your camera rig easily and comfortably using any compatible Arri standard baseplate. Baseplate stopper toggles are on either end so that you can slide your camera onto the plate however you’d like.

This sleek, rugged Arri standard dovetail allows you to mount your camera rig easily and comfortably using any compatible Arri standard baseplate. Baseplate stopper toggles are on either end so that you can slide your camera onto the plate however you’d like.

This follow focus marking disk attaches to the hand wheel of the FIZ hand unit to allow you to create drawn-on custom marks for accurate focus pulls.

These follow focus marking disks attach to the hand wheel of the FIZ hand unit to allow you to create drawn-on custom marks for accurate focus pulls.

- Protectic Armor for BMCC 6K Protects Camera & Minimizes Wear Over Time
- Mount Accessories via NATO Rail, Arri Compatible Rosette, Cold Shoe Receivers, 1/4"-20 Threads with Locating Pins
- Various Configurations via Detachable Design Allows for Half Cage & L-Bracket Setups
- Xeno Top Handle Provides Additional Mounting Points & Increased Flexibility When Operating or Handling
- Battery Grip Compatible via an Adjustable Bottom Plate Expansion Bracket and Dual 15mm Rod Holder