Tilta - side 9

1. Connections between motors and the two hand grips are completely wireless.
2. There is no limit on the amount of motors an operator can attach per channel.
3. The left hand grip can easily control any one motor assigned by the AC from the Focus Finger Knob. Individual motor torque can be changed from the handle’s menu.
4. Calibration can be done from the motor directly and with the FIZ Unit off, motor control is automatically assigned to the handles without initiating Master-Slave mode.
5. Run/Stop Function Capable
6. Hard A-B stops can be created for the Knob.
7. Finger Knob throw can be adjusted for full 310 degrees, 180 degrees, or 85 degrees.
8. Powered by (2) 18650 Batteries – NOT included. Handle can be powered by the 7-pin port by the camera.
9. Compatible with the Gravity G1 Handheld Gimbal via Arri Standard Rosette, Tiltamax Gravity via Universal Gimbal Adapters, and Armor-Man via Nucleus-M D-cups.
10. Ideal for shoulder-mounted or gimbal setups

Weight:Left Handle Grip (no batteries or adapters): 0.529 lbs
Color: Gunmetal gray
Material: Aluminum-alloy, stainless steel, ABS plastic, rubber, Brazilian rosewood

1. Connections between the FIZ hand unit and the two hand grips to the motor are completely wireless.
2. There is no MDR unit. Each motor has a wireless module that can receive a signal without the MDR, saving space and setup time.
3. A single motor can be powered directly from the camera’s battery though a 7-Pin to P-TAP cable then daisy chained via 7-Pin to 7-Pin cable to run additional motors.
4. There is no limit on the amount of motors an operator can attach per channel.
5. 0.8 mod, 35-tooth, 32 pitch gear with a face width of 10mm
6. Motors can reach calibration on lenses with out hard stops
7. Motors fit standard 15mm and 19mm Rods
8. Compatible with the Gravity G1 Handheld Gimbal

This Pro Kit provides protective armor for the Sony a1, a7S III, a7R III, a7R IV, a7 III and includes many relevant accessories to greatly improve the camera’s functionality.

Tilta ES-T20-MTP kameramonteringstilbehør Topplate

This Handheld Kit provides protective armor for the Canon C70 and includes relevant accessories to improve the functionality of the C70 when shooting handheld.

This Lightweight Kit provides protective armor for the Canon C70 and includes relevant accessories to improve the functionality of the C70 while remaining lightweight.

- Top Plate with Shoe Mount
- Proprietary QR Baseplate Adapter
- 4 x Rosette Mounts
- 1/4"-20 and 3/8"-16 Threads

This camera cage provides protective armor for the RED Komodo camera. It provides several 1/4”-20 and 3/8”-16 mounting points for mounting accessories. It also includes two rosettes on each side as well as a cold shoe mount on top. The base of the cage also provides several mounting holes when attaching your camera to gimbals to more easily fine tune the balance of your setup.

A variety of different baseplates can be attached to the bottom of the cage, allowing for various rod mounting and optional power supply configurations.

The quick release top handle, adjustable quick release top handle, and various optional side handles can be attached to the cage to provide for different ways to comfortably operate your camera setup.

This kit of the RED Komodo camera cage will help to fully build out your setup. It includes: the base RED Komodo cage, right side wooden handle, quick release top handle, Arca and Manfrotto quick release baseplates, 15mm LWS baseplate, an Adjustable Cold Shoe Accessory Mounting Bracket, and finally a Dual Canon BP to V Mount Adapter Battery Plate to allow for a longer battery life for your camera.

- Adjustable Design
- 360° Rotation
- Adjustable & Secure
- Soft Silicone Material Provides Anti-Slip Protection For Your Device
- Universal Design Ready For Expansion

This Tiltaing Wooden Handle from Tilta is a contoured handle designed to mount onto the left side of your Tiltaing camera cage. Made with a comfortable wooden grip, this legacy handle requires a separately available adapter to mount onto your cage.

This Tiltaing Wooden Handle from Tilta is a contoured handle designed to mount onto the left side of your Tiltaing camera cage. Made with a comfortable wooden grip, this legacy handle requires a separately available adapter to mount onto your cage.

Extra or replaces original Soft Carrying Case

This power supply system is designed to allow for external power on DSLR and mirrorless cameras. The battery plate comes with a DC Female to Canon LP-E6 which is then connected to an 8V DC cable that plugs into the plate to provide your camera with power. It comes mounted to a 15mm LWS rod adapter for use on 15mm LWS rod systems and comes in both V-mount and gold mount versions.

This Mounting Plate attaches near the bottom of the Full Camera Cage for RED V-RAPTOR.

It offers some additional ¼”-20 mounting points with locating pins and serves as an alternative location to mount the Advanced I/O Module.

NOTE: Access to the media door will be limited when using this plate.

This Side Handle Attachment allows you to mount your Advanced Left Side Wooden Handle via a NATO Rail Connection.

This is the perfect option for our RED Raptor Cage, RED Komodo Cage, or any other camera cage that features a NATO Rail.

This attachment type can also be adapted to work with almost any cage via the included 36mm NATO Rail Attachment that can mount via 1/4″-20.

The Tilta Accessory Mounting Clamp is a versatile accessory clamp, designed to securely fasten onto various parts, granting you the freedom to mount a wide range of accessories with ease.

Featuring both 1/4″-20 and 3/8″-16 threads with locating points, this clamp opens up a world of opportunities for mounting accessories such as articulating arms, external monitors, boom microphones, LED lights, wireless video transmitters, and small battery plates.

With its anti-slip, silicone grip, you can trust that your equipment will stay firmly in place, even during dynamic shots and movements.

The Tilta Accessory Mounting Clamp opens up to 30mm and tightens down to 13mm with a maximum weight capacity of 3kg.

Not limited to conventional mounting options, this clamp is perfect for attaching accessories to gimbals, stands, or even as a unique way to mount a small action camera.

Whether you’re a filmmaker, photographer, or content creator, the Tilta Accessory Mounting Clamp opens up a world of creative possibilities.

This bracket attaches to the front of the RED V-RAPTOR camera body to provide support for an LPL Lens Mount Adapter.

This support attaches via multiple threads for increased security via four points of contact.

This accessory is the perfect solution for adding increased security to your LPL Adapter, allowing you to support heavier full frame lenses and take advantage of the entire V-RAPTOR 8K Sensor

This 1/4″-20 to Arri rosette attachment was designed specifically with the Panasonic GH Series and Sony a7/a9 Series of Tiltaing Camera Cages in mind. It allows you to mount an Arri rosette attachment to your rig via two 1/4″-20 mounting screws. The slot for the 1/4″-20 screws allows you easily adjust the attachment based on where the screw holes are located on the cage.

This Top Handle attaches to both the Top Plate and Front Top Plate for RED V-RAPTOR which creates a secure point of contact for handling and operating your camera while also providing additional mounting points for accessories.

This Top Handle features both 1/4”-20 and 3/8”-16 mounting points with locating pins as well as one cold shoe receiver.

This Handle mounts to our Top Plates via four ¼”-20 screws for improved security especially when supporting heavier camera builds.

This Handle can also be broken down into a more compact configuration that only requires the Front Top Plate to mount in order to better accommodate lightweight camera builds.

The newly designed 15mm rod mount allows you to mount a single 15mm rod either parallel or perpendicular to the Top Handle, allowing for more flexibility when mounting electronic viewfinders or external monitors.

This Extension Accessory for RED V-RAPTOR allows you to extend your Top Handle which offers additional mounting points and increased flexibility when handling.

This Extension includes a removable section that further extends the handle if needed to accommodate larger batteries.

The curved design of this handle extension is a great option for expanding ways in which you can operate the camera particularly at lower angles.

Arm your camera with this Tilta camera cage specifically designed for the Sony Venice Rialto. It provides a high quality aluminum, CNC-milled protective armor for the sensor block of the camera that has several ¼”-20 and ⅜”-16 mounting points for attaching accessories. A battery plate (available in either gold mount or V-mount) can be mounted to the back of the sensor block. This then sends power to a 3-pin Fischer and 2-pin Lemo port on the front of the cage to allow you to power accessories. The included 3-pin Fischer cable sends communication from the camera’s 3-pin communication port to a 3-pin Fischer port on the back of the cage (facing the operator), which then sends R/S functionality to a 3-pin R/S port on the front of the cage.

- Custom Designed for the Sony Burano 8K Digital Cinema Camera
- Mounting Points Include Arri Standard Rosettes, 1/4"-20 and 3/8"-16 Threads, Both with Locating Points
- Side Mounting Plate Provide Additional Mounting Options for Accessories like Wireless Video Transmitters
- 15mm Baseplate Supports 15mm LWS Rods and Accessories like Matte Boxes and Follow Focus Systems
- EVF Bracket Offers Greater Flexibility for Tilting and Rotating the Camera's EVF

- Custom Designed for the Sony Burano 8K Digital Cinema Camera
- Mounting Points Include Arri Standard Rosettes, 1/4"-20 and 3/8"-16 Threads, Both with Locating Points
- Side Mounting Plate Provide Additional Mounting Options for Accessories like Wireless Video Transmitters
- 15mm Baseplate Supports 15mm LWS Rods and Accessories like Matte Boxes and Follow Focus Systems
- Top Plate Provides Mounting Options and Full Compatibility with Original Top Handle

- Custom Designed for the Sony Burano 8K Digital Cinema Camera
- Mounting Points Include Arri Standard Rosettes, 1/4"-20 and 3/8"-16 Threads, Both with Locating Points
- Side Mounting Plate Provide Additional Mounting Options for Accessories like Wireless Video Transmitters
- 15mm Baseplate Supports 15mm LWS Rods and Accessories like Matte Boxes and Follow Focus Systems
- Top Plate Provides Mounting Options and Full Compatibility with Original Top Handle

Introducing the Rotatable EVF Bracket for Sony BURANO, the perfect option for improving the flexibility of the camera’s Electronic Viewfinder.

This Bracket mounts to the Top Handle included with our Full Camera Cage for Sony Burano via a 15mm Rod Mount, as well as the Burano’s original Top Handle.

The other end of the bracket features a mount for the camera’s EVF which can tilt and rotate in order to better position the viewfinder.

This mount is also able to be adjusted closer or further to the rod mount in order to accommodate various configurations.