Tilta - side 7

- Protective Armor for RED V-RAPTOR Minimizes Wear and Supports Accessories
- Mounting Points include NATO Rail, ARRI Compatible Rosette, Cold Shoe, 1/4"-20 and 3/8"-16 Threads with Locating Pins
- Top Handle Offers Secure Option for Handling, Operating, and Mounting Accessories
- 15mm Rod Support Attach 15mm Rods to your System via LWS Baseplate or Side Rod Holders
- Expanded Functionality via Additional Ports Offers Flexibility for Run Stop and Timecode

- Protective Armor for RED V-RAPTOR Minimizes Wear and Supports Accessories
- Mounting Points include NATO Rail, ARRI Compatible Rosette, Cold Shoe, 1/4"-20 and 3/8"-16 Threads with Locating Pins
- Top Handle Offers Secure Option for Handling, Operating, and Mounting Accessories
- LWS Baseplate Compatible with Tilta Standard Dovetails and Arri Dovetails via Optional Adapter
- 15mm Rod Support Attach 15mm Rods to your System via LWS Baseplate or Side Rod Holders

Tilta TA-NEA-L-B kameramonteringstilbehør Forlengelsesarm

Arm your camera with this Tilta camera cage specifically designed for the Canon C200.

On the bottom of the cage is a Sony VCT-U14 compatible baseplate that allows you to attach various accessories via 15mm LWS rods on either the front or back side of the plate. The plate also has an ergonomic shoulder pad on the bottom so that you can quickly and easily detach from the VCT-U14 plate and be shoulder mount-ready in no time. Also included in the package is a Tilta Standard Lightweight Dovetail compatible adapter plate for the baseplate if you’d rather mount to a dovetail (dovetail sold separately). The plate also has Arri Standard Rosette connections on the left and right sides to allow you to attach handles for handheld operation as well as a built-in lens adapter support bracket.

Dedicated to Tilta's Camera Cage for the Sony PXW-FX9, this Quick Release Baseplate is a replacement part from the original cage. This baseplate is Sony VCT-U14-compatible and allows you to attach a variety of accessories via 15mm rods on either the front or back sides of the plate. The plate also has an integrated shoulder mount, for quick switching to shouldered shooting, and has ARRI rossette connections on both left and right sides for attaching accessory handles, including Sony's own FX9 operating handle.

Tilta MB-T16-SCC-A etui for kamerafilter Sort Nylon Kompakt veske for kamerafilter

Tilta TA-AHA9-L-B kameramonteringstilbehør Håndgrep

Tilta ES-T20-A kamerabur 1/4, 3/8" Sort

Tilta MB-T16-LS kameramonteringstilbehør Objektivstøtte

TILTA Nucleus M Kit 5
The Nucleus-M is a revolutionary and highly customisable 3-channel wireless lens control system. It allows you to have full control of focus, iris, and zoom on either the FIZ hand unit or between the two wireless hand grips. You can even split control of the channels between the hand unit and wireless hand grips as you see fit with the push of a button.

NUCLEUS-M HANDGRIP RIGHT and LEFT
Colour Gunmetal Grey
Weight (no batteries or adapters) (R)0.26 and (L)0.24 kg

1. Connections between motors and the two hand grips are completely wireless.
2. There is no limit on the amount of motors an operator can attach per channel.
3. The right hand grip can easily control any two motors assigned by the AC from the Zoom Joystick or Iris Finger Knob. Individual motor torque can be changed from the handle’s menu.
4. Calibration can be done from the motor directly and with the FIZ Unit off, motor control is automatically assigned to the handles without initiating Master-Slave mode.
5. Zip Function Capability
6. Run/Stop Function Capable
7. Hard A-B stops can be created for the Joystick and Knob individually.
8. Finger Knob throw can be adjusted for full 310 degrees, 180 degrees, or 85 degrees.
9. Powered by (2) 18650 Batteries – NOT included. Handle can be powered by the 7-pin port by the camera.
10. Compatible with the Gravity G1 Handheld Gimbal via Arri Standard Rosette, Tiltamax Gravity via Universal Gimbal Adapters, and Armor-Man via Nucleus-M D-cups.

Weight:Right Handle Grip (no batteries or adapters): 0.582 lbs
Color: Gunmetal gray
Material: Aluminum-alloy, stainless steel, ABS plastic, rubber, Brazilian rosewood

1. Connections between motors and the two hand grips are completely wireless.
2. There is no limit on the amount of motors an operator can attach per channel.
3. The left hand grip can easily control any one motor assigned by the AC from the Focus Finger Knob. Individual motor torque can be changed from the handle’s menu.
4. Calibration can be done from the motor directly and with the FIZ Unit off, motor control is automatically assigned to the handles without initiating Master-Slave mode.
5. Run/Stop Function Capable
6. Hard A-B stops can be created for the Knob.
7. Finger Knob throw can be adjusted for full 310 degrees, 180 degrees, or 85 degrees.
8. Powered by (2) 18650 Batteries – NOT included. Handle can be powered by the 7-pin port by the camera.
9. Compatible with the Gravity G1 Handheld Gimbal via Arri Standard Rosette, Tiltamax Gravity via Universal Gimbal Adapters, and Armor-Man via Nucleus-M D-cups.
10. Ideal for shoulder-mounted or gimbal setups

Weight:Left Handle Grip (no batteries or adapters): 0.529 lbs
Color: Gunmetal gray
Material: Aluminum-alloy, stainless steel, ABS plastic, rubber, Brazilian rosewood

1. Connections between the FIZ hand unit and the two hand grips to the motor are completely wireless.
2. There is no MDR unit. Each motor has a wireless module that can receive a signal without the MDR, saving space and setup time.
3. A single motor can be powered directly from the camera’s battery though a 7-Pin to P-TAP cable then daisy chained via 7-Pin to 7-Pin cable to run additional motors.
4. There is no limit on the amount of motors an operator can attach per channel.
5. 0.8 mod, 35-tooth, 32 pitch gear with a face width of 10mm
6. Motors can reach calibration on lenses with out hard stops
7. Motors fit standard 15mm and 19mm Rods
8. Compatible with the Gravity G1 Handheld Gimbal

Contents:
1Pcs:1× TiLTA TT-H03 Professional Handgrips Side Arms1Pair (PK0149):
2× TiLTA TT-H03 Professional Handgrips Side Arms

1. (1) 19mm dovetail plate
2. (2) Hand grips can be rotated 360 degrees from the Rosettes
3. High density foam handle for better support and stability
4. Quick Release Shoulder Pad (only compatible with the TILTA Alexa Mini baseplate)
5. (2) Side arms
6. Hard Shell Case
7. Great for handheld camerawork with any camera system

TECHNICAL DETAILS
Color: black
Material: aluminum-alloy

This Pro Kit provides protective armor for the Sony a1, a7S III, a7R III, a7R IV, a7 III and includes many relevant accessories to greatly improve the camera’s functionality.

Tilta ES-T20-MTP kameramonteringstilbehør Topplate

Tilta HDA-SRK kameramonteringstilbehør Skinne

- Flexible For Different Scenarios
- Custom Fit Design With Easy Access
- Multiple Locking Mechanisms To Secure Installation
- Modular Quick-Release Cable Clamp
- Easy Assemble

- Flexible For Different Scenarios
- Custom Fit Design With Easy Access
- Multiple Locking Mechanisms To Secure Installation
- Modular Quick-Release Cable Clamp
- Easy Assemble

Made specifically for video content creators that demand excellent low light performance, numerous recording options, and long recording times, the new A7sIII builds upon the legacy of the A7sII to deliver a camera that hits all the right spots for a camera of this level.

Inspired by the usefulness and ingenuity of this camera?s design, Tilta set off to incorporate new design touches that help elevate the camera even further. As part of the Tiltaing series of products, Tilta has put together a versatile, yet lightweight camera cage that is just the beginning for building a camera rig for professional video. The new camera cage is designed to augment and protect the a7sIII, as well as add expansion options like our new rotating top handle, rotating side handles, ARRI standard rosette mounts, and much more.

This camera cage provides complete protective armor for the Sony a7, a7 II, a7 III, a7S, a7S II, a7R, a7R II, a7R III, and a9 cameras. It provides several 1/4”-20 and 3/8”-16 mounting points as well as two cold shoe mounting points. The base of the cage also provides several mounting holes when attaching your camera to gimbals to more easily fine tune the balance of your setup.

A variety of different baseplates can be attached to the bottom of the cage, allowing for various rod mounting and optional power supply configurations.

The quick release top handle and various optional side handles can be attached to the cage to provide for different ways to comfortably operate your camera setup.

This kit of the Sony a7/a9 cage includes: the base Sony a7/a9 cage, quick release top handle, Tilta Hand Strap, Arca and Manfrotto quick release baseplates, two different bottom plates depending on the camera you are mounting into the cage, an HDMI to Micro HDMI adapter, a clamp to attach the HDMI adapter comfortably to the cage, and finally the Tiltaing Side Power Handle Type III (F570 Battery).

- Protective Armor Minimizes Wear and Tear Over Time
- Expandable Supports Many Other Tiltaing Accessories
- Mounting Options include NATO Rail, Rosette, Cold Shoe, and 1/4"-20 Threads with Locating Pins
- Security Attachments and Multiple Points of Contact Improve Connection Between Camera and Cage
- Magnetic Screwdriver Provides Convenient Option for Quick Assembly or Adjustments

- Protective Armor Minimizes Wear and Supports Various Accessories
- Top Handle Utilizes NATO Connection for Secure Handling, Operating, and Mounting of Accessories
- Mounting Options include NATO Rail, Rosette, Cold Shoe, and 1/4"-20 Threads with Locating Pins
- LWS Baseplate Supports Rod Based Accessories and Mounts to Tilta Dovetails
- Power Handle Features Power Outputs and Run Stop Capabilities via Included Cable

This Lightweight Kit provides protective armor for the Canon C70 and includes relevant accessories to improve the functionality of the C70 while remaining lightweight.