Wera Verktøy - side 12

Zyklop Hybrid ratchet set, 1/2" drive, metric. Including Zyklop Hybrid ratchet and Hybrid handle extension, extension and 10 sockets.

Wera compact tools with multi-component Kraftform handle for high working speeds and particularly ergonomic screwdriving. Bit
magazine integrated in the handle, for storage of 6 bits. The bayonet blade can be retracted for tight screwdriving situations. It can also
be removed for machine operation.The strong permanent magnet guarantees a tight fit of the bits.

Kraftform Kompakt 28 Imperial 1
Kraftform holder with anti-roll feature, multi-component, bayonet blade and bit magazine
Adaptor bayonet with stainless sleeve and strong permanent magnet
Suitable for bits with 1/4" hexagon drive (Wera connecting series 1)
Tough viscous bits for universal use

Høykvalitets bits for innfelte TORX®-skruer. Impaktor-teknologien gir en over gjennomsnittlig levetid selv under ekstreme forhold. Forbedret friksjonsmotstand, takket være den grove diamantpartikkelbelegget på bitsspissen, hindrer at skruen glir ut av hodet. Spesielt egnet for bruk med vanlige slagtrekkere. ¼" sekskant, egnet for holdere i henhold til DIN ISO 1173-D 6,3.

7-delt muttertrekker sett fra Wera. Hul aksel for festing av gjengestenger; bare da kan gjengestangen med mutter gli inn i den hule akselen. Multi-komponent Kraftform-håndtak for høye arbeidshastigheter og spesielt ergonomisk skruing. Sekskantet anti-rullefunksjon hindrer at verktøyet ruller bort, og håndtaksmerking forenkler å finne og sortere verktøyet; for sekskantede skruer.

High quality Kraftform Plus VDE screwdriver out of stainless steel by Wera. The stainless tools from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. They can be used for industrial application without hesitation. The individual testing of the Kraftform Stainless VDE screwdrivers in a water bath at 10,000 volts as per DIN EN 60900 (IEC 60900) ensures safe working with voltages of up to 1,000 volts. Secure working is also ensured under extreme conditions and verified with the proven cold impact resistance at -40° C. Kraftform handle for fast and low-fatigue working. "Take it easy" Tool Finder: colour coding according to profile and size. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace.

4-delt skrutrekker sett med Kraftform Plus håndtak for behagelig, ergonomisk arbeid som forebygger blemmer og hard hud. Harde grepssoner for høye arbeidshastigheter mens myke soner sikrer høy dreiemomentoverføring. "Take it easy" Tool Finder med fargekoding etter størrelser. Den heksagonale anti-rullefunksjonen hindrer irriterende rulling på arbeidsplassen.

Bits with tiny diamond particles on the bit tip. This ensures a secure fit in the screw head, reduces the contact pressure required and lowers the risk of slipping. BiTorsion bits with an elastic torsion zone – where kinetic energy is diverted from peak loads – and softer BiTorsion zone to prevent the bit tip from twisting under high strain. This greatly extends the product service life. Comes with Rapidaptor technology, which allows bits to be attached without any need to actuate the sleeve. The removal of the bit is simple, just by pushing the sleeve forward – for rapid bit change with just one hand. For insertion in the power screwdriver or into the chuck of the power drill. The multi-component Bit-Check is convincing on account of its low weight and the maximum possible degree of compactness. In this respect, the soft material in the lower section of the Bit-Check ensures that the bits are securely held whilst being simple to remove at the same time. The profile and size of the bits are easy to recognise thanks to the Wera "Take it easy" Tool Finder with its colour coding and clearly visible imprint.

Wera myk-slag hammers. Dobbelsidig konisk design for en sikker, uatskillelig tilkobling mellom hammerhåndtaket og hodet. Hammerhodet er laget av cellidor; håndtaket av høy kvalitet asketre. For tung bruk med forskjellige bruksområder takket være utskiftbare myke slaghammerhoder. Egnet for svært krevende jobber.

Wera 8004 C Pipenøkkel 1 stykker

BiTorsion-biter for Pozidriv-skruer med elastisk tverrsnittsflate der kinetisk energi blir absorbert under toppbelastninger. Med en mykere BiTorsion-sone som hindrer bit-spissen fra å vri seg ved høye belastninger. Dette øker betydelig produktets levetid. Ekstra hardt design. 1/4" sekskantet, egnet for holdere i henhold til DIN ISO 1173-D 6,3. *Pozidriv = registrert varemerke av selskapet European Industrial Service Ltd.

High quality combination ratchet wrench by Wera. Everything that a wrench has to be able to do. And a whole lot more. Faster, better, stylish. Yes, a real Joker.
11 mm

Robust Bit-Check by Wera. Bit-Checks provide a quick overview of the tools available. Bits not needed are simply reinserted into the set and do not get lost. Simple transportation e.g. in the shirt pocket. Includes universal holder with ring magnet – which very securely holds even heavy screws – and Rapidaptor, which allows bits to be attached without any need to actuate the sleeve. Can be inserted in the power screwdriver or for use in the chuck of the electric drill. Multi-component Bit-Check that can be positioned upright for permanently secure bit storage.

Wera 800/1 BTZ skrutrekker bits 1 stykker

Høykvalitets bits for Phillips-skruer. Impaktor-teknologien gir en over gjennomsnittlig levetid selv under ekstreme forhold. Forbedret friksjonsmotstand, takket være den grove diamantpartikkelbelegget på bitsspissen, hindrer at skruen glir ut av hodet. Spesielt egnet for bruk med vanlige slagtrekkere. ¼" sekskant, egnet for holdere i henhold til DIN ISO 1173-D 6,3.

High quality stepped drill bit by Wera. 9 drill steps increasing by 2 mm for material with a maximum thickness of 4.5 mm. Comes with edge breaker for 1 mm sheet metal. ¼” hexagon, suitable for holders as per DIN ISO 1173-D 6.3.

VDE ⅜" bit socket with holding function for particularly comfortable screwdriving with reduced risk of screw loss when feeding to the component. With increased safety due to yellow insulation core, which becomes visible in case of damage to the outer red VDE insulation layer. Individually tested tool as per IEC 60900 at 10,000 V for safe working at the approved voltage of 1,000 V.

VDE ⅜" bit socket with holding function for particularly comfortable screwdriving with reduced risk of screw loss when feeding to the component. With increased safety due to yellow insulation core, which becomes visible in case of damage to the outer red VDE insulation layer. Individually tested tool as per IEC 60900 at 10,000 V for safe working at the approved voltage of 1,000 V.

Koppnøkkelsett, 11 deler, torx, hex, 3/8"

Høykvalitets Wera Micro skrutrekker sett for presisjonsmekanisk arbeid. Rask vridning er mulig ved å feste hånden på vridningshetten og bruke den hurtigvendende sonen rett under den. Dette gjør tidkrevende grepjusteringer unødvendige. Kraftsone med integrerte myke soner sikrer overføring av høyere tilspennings- og løsningsmoment. Presisjonssone for riktig vinkel for justeringsarbeidet. Wera Black Point-spissen gir høy korrosjonsbeskyttelse og en nøyaktig passform. Inkluderer praktisk stativ for ryddig oppbevaring av skrutrekkere.

Høykvalitets biter med Torsion-sone - der kinetisk energi blir omdirigert fra toppbelastninger. Dette forlenger betydelig produktets levetid. Sterkt viskøst, for universell bruk. ¼" heksagon, egnet for holdere i henhold til DIN ISO 1173-F 6.3.

Wera 840/4 Z skrutrekker bits 1 stykker

Wera 05042605001 skruetrekker bit-holder 25,4 / 4 mm (1 / 4") 1 stykker

Klikk-momentskrutrekker i det uforvekslelige, robuste Wera-designet med høy nøyaktighet i henhold til DIN EN ISO 6789-1: 2017-07. Enkel innstilling og lagring av standardverdien. De hørbare og taktile klikkene når skalaen nås, letter også den sikre innstillingen av ønsket dreiemomentverdi. Det robuste frigjøringsmekanismen garanterer et tydelig hørbart og taktilt frigjøringssignal når det angitte dreiemomentet er nådd. For bruk med høyrehånd (med klokken) momentkontroll og med en reversibel ratchetmekanisme på 45 tenner.

T-handle screwdriver: The ideal handle shape allows the transmission of particularly high tightening and loosening torque. The ergonomic shape of the handle fills the palm of the hand well, the fingers lie safely in the soft rounded handle recesses. The whole hand makes contact with the handle and friction losses between the hand and the handle are avoided. With holding function to securely hold the hexagon socket screw on the tool. Special surface treatment of the blades for high corrosion protection and optimum fitting accuracy in the screw. Including metal rack for storage. The rack can be placed on the workbench or hung on the tool wall.

Zyklop ratchet with 1/4"drive. The 72 fine-pitched teeth ensure a low return angle of only 5°. The ratchet head pivots freely and can be locked into any position by using the slide switch that is positioned on either side. It is even possible to work conveniently in very confined and difficult-to-access areas with enhanced hand clearance. The predefined locking positions at 0°, 15° und 90°, both to the right and left, ensure safe working without any slipping of the ratchet head. The ratchet can be used as a conventional screwdriver in the 0° position by attaching an adaptor and a bit. The flywheel design ensures rapid screwdriving. The rotation-symmetric construction of the Kraftform handle and the free-turning sleeve support rapid twisting. The outstanding design of the Kraftform handle fits perfectly into the hand preventing hand injuries such as blisters and calluses. The hard materials used for the handle ensure quick and easy hand repositioning without any danger of the skin "sticking" to the handle. The softer anti-slip zones enable the low-loss transfer of high torque. For 1/4" square sockets as well as 1/4" adaptors with square drive, equipped with ball lock.