Wera Verktøy - side 14

Justerbar tang, isolert, 155 mm, maks. åpning: 13 mm

Wera VDE screwdrivers with multi-component Kraftform handle for fast and low-fatigue working: hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Individually tested in water bath at 10,000 volts for secure work at the permissible voltage of 1,000 volts. The tips of the Wera Lasertip screwdrivers are microscopically roughened by laser beams. This rough surface literally bites into the head of the screw. Any unintentional slipping out is therefore a thing of the past. “Take it easy” tool finder with colour coding according to profiles and size stamp – for simple and rapid accessing of the required tool. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace.

Wera 8000 C-R Reservedelsett

Wera 8000 B-R Reservedelsett

VDE ⅜" bit socket with holding function for particularly comfortable screwdriving with reduced risk of screw loss when feeding to the component. With increased safety due to yellow insulation core, which becomes visible in case of damage to the outer red VDE insulation layer. Individually tested tool as per IEC 60900 at 10,000 V for safe working at the approved voltage of 1,000 V.

Long ¼" hand and machine socket (ISO 2725 part 3) with ball intercept ring; for external hexagonal bolts and sockets. For use in manual and machine operation (non-impact), even with low-lying screwdriving and protruding threaded rods. With Take it easy tool finder with colour coding by size - for easy and fast location of the required tool. Easy to grasp even with oily hands. The hexagon profile allows the transmission of high forces and puts less strain on the edges of bolts or screw heads than a double hexagon profile. Fine-toothed ratchets also make the use of a double hexagon profile superfluous, even in confined spaces, thanks to their small back-pivoting angle.

VDE ⅜" bit socket with holding function for particularly comfortable screwdriving with reduced risk of screw loss when feeding to the component. With increased safety due to yellow insulation core, which becomes visible in case of damage to the outer red VDE insulation layer. Individually tested tool as per IEC 60900 at 10,000 V for safe working at the approved voltage of 1,000 V.

Long ¼" hand and machine socket (ISO 2725 part 3) with ball intercept ring; for external hexagonal bolts and sockets. For use in manual and machine operation (non-impact), even with low-lying screwdriving and protruding threaded rods. With Take it easy tool finder with colour coding by size - for easy and fast location of the required tool. Easy to grasp even with oily hands. The hexagon profile allows the transmission of high forces and puts less strain on the edges of bolts or screw heads than a double hexagon profile. Fine-toothed ratchets also make the use of a double hexagon profile superfluous, even in confined spaces, thanks to their small back-pivoting angle. 13.0 mm

Wera 05056520001 skrutrekker bits 1 stykker

Premium-biter for Phillips-skruer. Momenttopper dempes av tverrsnittsformen. Tidlig slitasje unngås og levetiden til biter økes. Robust, for universell bruk. 1/4" sekskantet, egnet for holdere i henhold til DIN ISO 1173-D 6,3.

Premium bits med tverrsnittssone der kinetisk energi blir absorbert under toppbelastninger. Dette øker produktets levetid betydelig. Tøft, for universell bruk. 1/4" sekskantet, egnet for holdere i henhold til DIN ISO 1173-D 6.3.

High quality bits for Phillips screws. Screws can be applied without any damage to the surface. The Torsion design means that torque peaks can be absorbed. This prevents premature wear and enhances the service life. Extra-hard; ¼" hexagon, suitable for holders as per DIN ISO 1173-D 6.3.

Wera 800/1 BTZ skrutrekker bits 1 stykker

Høykvalitets biter for Pozidriv-skruer. Impaktor-teknologien tilbyr en over gjennomsnittlig levetid selv under ekstreme forhold. Forbedret friksjonsmotstand, takket være den grove diamantpartikkelbelegget på bitsspissen, hindrer at skruen glir ut av hodet. Spesielt egnet for bruk med vanlige slagtrekkere. ¼" sekskant, egnet for holdere i henhold til DIN ISO 1173-D 6,3. * Pozidriv = registrert varemerke av European Industrial Service Ltd.

Høykvalitets bits for Phillips-skruer. Impaktor-teknologien gir en over gjennomsnittlig levetid selv under ekstreme forhold. Forbedret friksjonsmotstand, takket være den grove diamantpartikkelbelegget på bitsspissen, hindrer at skruen glir ut av hodet. Spesielt egnet for bruk med vanlige slagtrekkere. ¼" sekskant, egnet for holdere i henhold til DIN ISO 1173-D 6,3.

Bits for innfelte TORX®-skruer med små diamantpartikler på bit-spissen. Dette sikrer en sikker passform av biten i skruen, reduserer kontaktrykket som kreves og senker risikoen for glidning. Kommer med en Torsion-sone - der kinetisk energi blir omdirigert fra toppbelastninger - og mykere BiTorsion-sone for å hindre at bit-spissen vrir seg under toppbelastninger. Dette forlenger betydelig produktets levetid. ¼" sekskant, egnet for holdere i henhold til DIN ISO 1173-D 6,3.

Wera 05004941001 skrutrekker bits 1 stykker

BiTorsion-biter for TORX®-stikkontaktskruer med elastisk tverrsnittssone der kinetisk energi blir absorbert under toppbelastninger. Med mykere BiTorsion-sone for å hindre at bit-tuppen vrir seg ved høye belastninger. Dette øker produktets levetid betydelig. Best mulig levetid med tilsvarende holder. Robust, for universell bruk. 1/4" sekskantet, egnet for holdere i henhold til DIN ISO 1173-D 6,3.

BiTorsion-biter for TORX®-stikkontaktskruer med elastisk tverrsnittssone der kinetisk energi blir absorbert under toppbelastninger. Med mykere BiTorsion-sone for å hindre at bit-tuppen vrir seg ved høye belastninger. Dette øker produktets levetid betydelig. Best mulig levetid med tilsvarende holder. Robust, for universell bruk. 1/4" sekskantet, egnet for holdere i henhold til DIN ISO 1173-D 6,3.

Wera 05056335001 skrutrekker bits 1 stykker

Wera 05056176001 skrutrekker bits 1 stykker

Wera 05056172001 skrutrekker bits 1 stykker

VDE ⅜" bit socket with holding function for particularly comfortable screwdriving with reduced risk of screw loss when feeding to the component. With increased safety due to yellow insulation core, which becomes visible in case of damage to the outer red VDE insulation layer. Individually tested tool as per IEC 60900 at 10,000 V for safe working at the approved voltage of 1,000 V.

VDE ⅜" bit socket with holding function for particularly comfortable screwdriving with reduced risk of screw loss when feeding to the component. With increased safety due to yellow insulation core, which becomes visible in case of damage to the outer red VDE insulation layer. Individually tested tool as per IEC 60900 at 10,000 V for safe working at the approved voltage of 1,000 V.

Forbindelsesdel 1/4" firkantet hodekontakt til 3/8" ekstern firkantet hode. For manuelle og maskindrevne verktøy (ikke-impakt), med kulestoppgroove for å låse kontakten sikkert, knurling på baksiden for håndterbarhet under manuell bruk; krom-vanadium, matt forkrommet.