Wera Verktøy - side 16

Wera 05003834001 nøkkelsett (verktøy) Stikkontakt

Socket rail with 9 long manual and machine sockets (non-impact), 3/8". A smooth rotary mechanism allows a secure hold and easy access of the sockets. Long 3/8" manual and machine sockets (ISO 2725 part 3) by Wera for manual and (non-impact) machine use even at low lying couplings and protruding thread rods. With Take it easy tool finder with colour coding by size - to help you find the required tool quickly and easily. Slip-proof for easy grip even with oily hands. With hexagon profile and ball stop groove. The hexagon profile enables the transmission of high forces and loads the edges of the bolt or the screw head less than a double hexagon profile. Fine-teethed ratchets also make use of a double hexagon profile superfluous, even in confined spaces, thanks to their small return angle. For external hexagon bolts and screws. The rail allows temporary attachment to metallic surfaces and, with its twist-to-unlock function, ensures secure locking and unlocking of the sockets.

Sokkelstang med 9 manuelle og maskinelle sokler (ikke-impact), 1/2". En jevn roterende mekanisme gir et sikkert grep og enkel tilgang til soklene. Med Take it easy verktøyfinder med fargekoding etter størrelse - for å hjelpe deg med å finne det nødvendige verktøyet raskt og enkelt. Stangen tillater midlertidig festing til metalliske overflater, og med sin vri-for-å-låse opp funksjon, sikrer den sikker låsing og opplåsing av soklene.

VDE ⅜" bit socket with holding function for particularly comfortable screwdriving with reduced risk of screw loss when feeding to the component. With increased safety due to yellow insulation core, which becomes visible in case of damage to the outer red VDE insulation layer. Individually tested tool as per IEC 60900 at 10,000 V for safe working at the approved voltage of 1,000 V.

VDE ⅜" bit socket with holding function for particularly comfortable screwdriving with reduced risk of screw loss when feeding to the component. With increased safety due to yellow insulation core, which becomes visible in case of damage to the outer red VDE insulation layer. Individually tested tool as per IEC 60900 at 10,000 V for safe working at the approved voltage of 1,000 V.

VDE ⅜" bit socket with holding function for particularly comfortable screwdriving with reduced risk of screw loss when feeding to the component. With increased safety due to yellow insulation core, which becomes visible in case of damage to the outer red VDE insulation layer. Individually tested tool as per IEC 60900 at 10,000 V for safe working at the approved voltage of 1,000 V.

Long ¼" hand and machine socket (ISO 2725 part 3) with ball intercept ring; for external hexagonal bolts and sockets. For use in manual and machine operation (non-impact), even with low-lying screwdriving and protruding threaded rods. With Take it easy tool finder with colour coding by size - for easy and fast location of the required tool. Easy to grasp even with oily hands. The hexagon profile allows the transmission of high forces and puts less strain on the edges of bolts or screw heads than a double hexagon profile. Fine-toothed ratchets also make the use of a double hexagon profile superfluous, even in confined spaces, thanks to their small back-pivoting angle.

Forbindelsesdel 1/4" firkantet hodekontakt til 3/8" ekstern firkantet hode. For manuelle og maskindrevne verktøy (ikke-impakt), med kulestoppgroove for å låse kontakten sikkert, knurling på baksiden for håndterbarhet under manuell bruk; krom-vanadium, matt forkrommet.

Høykvalitets bits for Phillips-skruer. Impaktor-teknologien gir en over gjennomsnittlig levetid selv under ekstreme forhold. Forbedret friksjonsmotstand, takket være den grove diamantpartikkelbelegget på bitsspissen, hindrer at skruen glir ut av hodet. Spesielt egnet for bruk med vanlige slagtrekkere. ¼" sekskant, egnet for holdere i henhold til DIN ISO 1173-D 6,3.

Wera 05066308001 skrutrekker bits 1 stykker

Wera 860/1 XZN Vielzahn skrutrekker bits 1 stykker

Wera 8000 C-R Reservedelsett

Wera 8000 B-R Reservedelsett

Long ¼" hand and machine socket (ISO 2725 part 3) with ball intercept ring; for external hexagonal bolts and sockets. For use in manual and machine operation (non-impact), even with low-lying screwdriving and protruding threaded rods. With Take it easy tool finder with colour coding by size - for easy and fast location of the required tool. Easy to grasp even with oily hands. The hexagon profile allows the transmission of high forces and puts less strain on the edges of bolts or screw heads than a double hexagon profile. Fine-toothed ratchets also make the use of a double hexagon profile superfluous, even in confined spaces, thanks to their small back-pivoting angle. 13.0 mm

High quality bits for Phillips screws. Screws can be applied without any damage to the surface. The Torsion design means that torque peaks can be absorbed. This prevents premature wear and enhances the service life. Extra-hard; ¼" hexagon, suitable for holders as per DIN ISO 1173-D 6.3.

High quality bits for recessed TORX PLUS® screws. TORX PLUS® profile: in comparison to normal TORX® profiles, the enlargement of the 6 torque-transferring flanks between the tool and the screw is effected by means of an ellipse-shaped profile design and not a circular one. This means that the power applied when screwdriving is spread over a larger area. Higher torque is transferred and the service life of the screw and tool is also enhanced. Extra-hard. ¼" hexagon, suitable for holders as per DIN ISO 1173-D 6.3.

Høykvalitets biter for Phillips-skruer med Torsion-sonen - der kinetisk energi blir omdirigert fra toppbelastninger - og mykere BiTorsion-sone for å hindre at bitsspissen vrir seg under toppbelastninger. Dette forlenger betydelig produktets levetid. Ekstra hardt design, ¼" heksagon, egnet for holdere i henhold til DIN ISO 1173-D 6.3.

Wera 05066310001 skrutrekker bits 1 stykker

Bits for sporskrue med tverrsnittsform mot tidlig slitasje. Robuste, for universell bruk. 1/4" sekskantet, egnet for holdere i henhold til DIN ISO 1173-D 6.3.

Premium-biter for Phillips-skruer. Momenttopper dempes av tverrsnittsformen. Tidlig slitasje unngås og levetiden til biter økes. Robust, for universell bruk. 1/4" sekskantet, egnet for holdere i henhold til DIN ISO 1173-D 6,3.

Premium bits med tverrsnittssone der kinetisk energi blir absorbert under toppbelastninger. Dette øker produktets levetid betydelig. Tøft, for universell bruk. 1/4" sekskantet, egnet for holdere i henhold til DIN ISO 1173-D 6.3.

High quality, metric, combination ratchet wrench by Wera. Everything that a wrench has to be able to do. And a whole lot more. Faster, better, stylish. Yes, a real Joker. 10 mm

Spissett for skrutrekker, 6 deler, phillips, pozidriv, slot, PH1, PH2, PZ1, PZ2, SL5.5, SL6.5, heksagonal, lengde: 50 mm

Utrolig kompakt settarrangement med mange verktøy på et minimum av plass. En helt ny ratchet-sett-følelse takket være de unike tekstilboksene som er veldig robuste og holdbare. De kan plasseres oppreist for ryddig lagring på verkstedhyllen. Ekstra overflatebeskyttelse på grunn av tekstil yttermateriale. Lav vekt og volum for enklere mobilitet. "Take it easy" Tool Finder med fargekoding etter størrelser.

VDE ⅜" bit socket with holding function for particularly comfortable screwdriving with reduced risk of screw loss when feeding to the component. With increased safety due to yellow insulation core, which becomes visible in case of damage to the outer red VDE insulation layer. Individually tested tool as per IEC 60900 at 10,000 V for safe working at the approved voltage of 1,000 V.