Viega

Forlengelse- gunmetal- R-gjenge, Rp-gjenge

Viega 2426.1

Gemini monteringsenhet - Loddingstilkobling, Rp-gjenger Komponenter - kort messingbue, galvanisert stål (flate) monteringsbrakett d: 12 mm, Rp: 12, dybdemåler: 150 mm

Avløp og luktfeller i henhold til DIN EN 274 for vasker og bideter - designversjoner og tilbehør. Høykvalitets byggeteknologi med enkel montering. Visign universelle og spalteventiler med åpen eller klikklukking. Plassbesparende luktfeller for skjult eller pre-veggmontering. Designversjoner. Flaskeluktfeller eller rørluktfeller laget av messing eller plastikk.Tilbehør for spesielle installasjonssituasjoner.

Røroppfanger - for vask - plastkomponenter Avløpsalbue 45°, tilkobling for avløpsslange Kvalitetskontrollert i henhold til DIN EN 274 G: 112, DN: 50

Reduksjon for kjøkkenvaskavløp i hvit plast

Avløps- og overløpsett for kjøkkenvask. Med ventilhatt i rustfritt stål, høydejusterbar rør for overløp, kulekjede-stopper og 250 mm krombelagt kulekjede

Røroppfang - for vask - plast G: 112, L: 700, DN: 50

Tilkoblingsrør - for WC - plastkomponenter - leppeforsegling DN: 100, L: 250, versjon: alpin hvit

Forbindelsesbøyle 90° - for WC - plastkomponenter - leppeforsegling DN: 100, versjon: alpin hvit

Forbindelsesbue 22,5° - for WC - plastkomponenter - leppeforseglingDN: 100, L: 150, versjon: alpinhvit

Slange skrufitting 45° for avløpsslange tilkobling - plast G: 1, Ø: 20

Slange skrufitting 45° for 2 avløpsslange tilkoblinger. Materiale: hvit plast

Albue 90° - kobber - loddet tilkobling: 10

Albue 45° - kobber - loddet tilkobling: 22 (kvalitetsmerke for d12-54)

Flow-optimised press connector system for drinking water installations in acc. with DIN 1988 and DIN 50930-6 as well as heating installations, tested in acc. with DVGW worksheet W 534.Press connectorsSafe and fast processing without calibration of the pipe ends through O-ring-free press technology in all dimensions. In this way, widening or calibration of the pipe-ends becomes superfluous and reduces the assembly times. The interaction between aerodynamic radii and minimal cross-section narrowings ensure the lowest pressure losses in press systems for multilayer pipes. This allows a smaller dimensioning of drinking water installations and reduces the pipeline volume.SC-ConturAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionPipesRaxofix PE-Xc/Al/PE-Xc•dimensionally stable, oxygen-proof in acc. with DIN 4726, greyRaxofix PE-Xc•flexible, blackDimensionsPress connectors and pipes•Raxofix-PE-Xc/Al/PE-Xc: d 16/20/25/32/40/50/63•Raxofix PE-Xc: d 16/20Areas of application PE-Xc/Al/PE-XcDrinking waterHeatingRainwaterCompressed airAreas of application PE-XcRainwaterDrinking waterUse of the system for application areas other than those described here must be agreed with Viega Service Center.Operating conditionsDrinking water installations•Operating temperature max. 70 °C•Operating pressure max. 1.0 MPaHeating installations•Operating temperature max. 80 °C•Operating pressure max. 1.0 MPaIrrelevant of the direction of flow, mixed installations are permitted.NoteThe DVGW test mark is only valid f

Profipress T-stykke med SC-Contur-kobberpresskontakterKomponenterEPDM-tetningsdeler d1: 15, d2: 15, d3: 15

Forlengelse- gunmetal- R-gjenge, Rp-gjenge

Forlengelse- gunmetal- R-gjenge, Rp-gjenge

Forlengelse- gunmetal- R-gjenge, Rp-gjenge

Raxofix T-piece with SC-Contur- silicium bronze- press connectors, Rp-threadd1: 16, Rp: 12, d2: 16

Long nipple- gunmetal- R-threadR: 1, L: 60

Viega 2616.1

Flow-optimised press connector system for drinking water installations in acc. with DIN 1988 and DIN 50930-6 as well as heating installations, tested in acc. with DVGW worksheet W 534.Press connectorsSafe and fast processing without calibration of the pipe ends through O-ring-free press technology in all dimensions. In this way, widening or calibration of the pipe-ends becomes superfluous and reduces the assembly times. The interaction between aerodynamic radii and minimal cross-section narrowings ensure the lowest pressure losses in press systems for multilayer pipes. This allows a smaller dimensioning of drinking water installations and reduces the pipeline volume.SC-ConturAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpresse

Prestabo T-piece with SC-Contur- galvanised non-alloyed steel- press connectorsComponentsEPDM sealing elementsd1: 22, d2: 18, d3: 22