Viega - side 4

Viega 3130

Reducer- gunmetal- R-thread, Rp-threadComponentsPolygonR: 212, Rp: 112

Easytop Ball valve with SC-Contur- press connectorsComponentsValve casing gunmetal or silicium bronze according to DIN 50930-6 / DIN EN 1982, maintenance-free selector shaft, actuation lever T-form with medium marking green/red exchangeable, stainless steel ball, EPDM sealing elements.Technical dataoperating pressure max. 1.6 MPa (PN 16)operating temperature max. 110 °Cwith DVGW-test markDN: 15, d: 18

Viega connection elbow 90° ø110/155 x 50 mm

Lang brystvorte i gunmetal med R-gjenge. R: 1, L: 150 mm

T-stykke i bronse med loddingstilkobling, Rp-gjenge d1: 28, Rp: 12, d2: 28

Viega 95270

Fittings with threads in acc. with DINEN 10226, Part 1, certified for drinking water in acc. with DIN 1988 and gas installations in acc. with TRGI 2008 (observe notes on the model), tested in acc. with DVGW worksheet GW 6 and GW 393.CertificatesGunmetal threaded fittings – DVGW-Reg.-No. DV-7401AO2957Threaded connectionsR-external thread, produced on site – hempen without roughening of the thread is possible.

Screw fitting- gunmetal or silicon bronze- R-thread, Rp-thread- flat sealing, angled

Screw fitting- gunmetal or silicon bronze- R-thread, Rp-thread- flat sealing, angled

Viega 2318

Viega 2318

Viega 2318

Viega 2326

Press connector system with press connectors and pipes made of stainless steel material Nos. 1.4401 and 1.4521 in acc. with DIN EN 10088, DIN EN 10312, DVGW worksheet GW 541, system certification for connectors and pipes in acc. with DVGW worksheet W 534, for drinking water installations in acc. with DIN 1988. For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-die

Sanpress Inox Crossover with SC-Contur- steel non-corroding- plug-in end, press connectionComponentsEPDM sealing elementd: 15

Sanpress Inox Adapter elbow 90° with SC-Contur- steel non-corroding- press connection, Rp-thread, polygonComponentsEPDM sealing elementd: 15, Rp: 12

Press connector system with press connectors and pipes made of stainless steel material Nos. 1.4401 and 1.4521 in acc. with DIN EN 10088, DIN EN 10312, DVGW worksheet GW 541, system certification for connectors and pipes in acc. with DVGW worksheet W 534, for drinking water installations in acc. with DIN 1988. For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-die

Viega 2318

Viega 2316.1

Viega 2326XL

Sanpress Adapter with SC-Contur- gunmetal or silicium bronze- press connection, R-threadComponentsEPDM sealing element, polygon, VdS certificationd: 42, R: 112

Viega 2215.1

Sanpress Reducer with SC-Contur- gunmetal or silicium bronze- plug-in end, press connectionComponentsEPDM sealing elementd1: 28, d2: 18

Sanpress Adapter elbow 90° with SC-Contur- gunmetal or silicium bronze- press connection, R-threadComponentsEPDM sealing element, polygond: 22, R: 34