Viega - side 31

Viega 2212

Viega 2211

Viega 2215.1XL

Sanpress T-piece with SC-Contur- gunmetal or silicium bronze- press connectors, Rp-threadComponentsEPDM sealing elements, polygon, VdS certificationd1: 35, Rp: 12, d2: 35

Viega 2217.2

Viega 2218

Viega 2226.1

Press connector system with press connectors made of copper and gunmetal tested in acc. with DVGW worksheet W 534 with DVGW test seal and pipes made of copper in acc. with EN 1057 in acc. with DVGW worksheet GW 392.Suitable for drinking water installations in acc. with DIN 1988.For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-dien-monomer rubber), up to 110 °C

Press connector system with press connectors made of gunmetal, pipes made of stainless steel material Nos. 1.4401 and 1.4521 in acc. with DINEN 10088, DIN EN 10312, DVGW worksheet GW 541, system certification for connectors and pipes in acc. with DVGW worksheet W 534, for drinking water installations in acc. with DIN 1988. For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene

Viega 2216

Viega 2216.1XL

Viega 2326.1

Viega 2316.1

Enkeltopp kuleventil - Innløp/utløp: Rp-gjengekomponenter Ventilkasse av bronse eller silisiumbronse i henhold til DIN 50930-6 / DIN EN 1982, vedlikeholdsfri valgaksel, rustfritt stålkule, aktiveringshendel T-form med mediummarkering grønn/rød utskiftbar. Tekniske data Driftstrykk maks. 1,6 MPa (PN 16) Driftstemperatur maks. 110 °C med DVGW-testmerke DN:15, Rp:12

Easytop Ball valve with SC-Contur- press connection, Rp-threadsComponents Valve casing in gunmetal or silicium bronze according to DIN 50930-6 / DIN EN 1982, maintenance-free selector shaft, stainless steel ball, actuation lever T-form with medium marking green/red exchangeable, EPDM sealing element.Technical dataoperating pressure max. 1.6 MPa (PN 16)operating temperature max. 110 °C with DVGW-test markDN: 20, d: 22, Rp: 34

Viega 1117.2

Viega 1115.1

Prestabo adapter med SC-Contur, galvanisert ikke-legeret stål, trykkforbindelse og Rp-gjenge

Viega 1112

Viega 1116.1XL

Megapress-adapter med SC-Contur for drikkevannsinstallasjon - stålrør i samsvar med DIN EN 10220/10255 med galvanisering i samsvar med DIN EN 10240 - bronse eller silisiumbronse - trykkontakterKomponenterEPDM tetningselement, skjæring ring, separatorringDN: 20, D: 34, d: 22

Viega 5318

Long nipple- gunmetal- R-thread

Postpose, International B4 (250 x 353 mm), lommebok, åpen ende, selvklebende (Peel & Seal), brun, pakke av 100

Sanpress Inox skyvekobling med SC-Contur- stål som ikke korroderer - trykkontakterKomponenterEPDM tetningselementerd: 54 (VdS-sertifisering)