Tilta Foto- & Videotilbehør - side 2

- Protectic Armor for BMCC 6K Protects Camera & Minimizes Wear Over Time
- Mount Accessories via NATO Rail, Arri Compatible Rosette, Cold Shoe Receivers, 1/4"-20 Threads with Locating Pins
- Various Configurations via Detachable Design Allows for Half Cage & L-Bracket Setups
- Xeno Top Handle Provides Additional Mounting Points & Increased Flexibility When Operating or Handling
- Battery Grip Compatible via an Adjustable Bottom Plate Expansion Bracket and Dual 15mm Rod Holder

This filter is the new, in house manufactured 4×5.65 filter designed for the any Matte Box with a 4×5.65 filter tray including the Mirage Matte Box.

This filter is available in various levels of Neutral Density, providing users greater control over their exposure.

This allows users to reduce light visible to the sensor, allowing you to open up your aperture when shooting in brighter lighting environments like daylight.

Full Spectrum ND Filters evenly reduce all wavelengths of light including visible light, ultra violet, and infra-red.ed.

This camera cage provides complete protective armor for the Fujifilm X-T3 and X-T4 cameras.

It provides several 1/4”-20 mounting points as well as two cold shoe mounting points.

The base of the cage also provides several mounting holes when attaching your camera to gimbals to more easily fine tune the balance of your setup.

A variety of different baseplates can be attached to the bottom of the cage, allowing for various rod mounting and optional power supply configurations.

The quick release top handle and various optional side handles can be attached to the cage to provide for different ways to comfortably operate your camera setup.

This kit of the Fujifilm X-T3/X-T4 cage includes: the base Fujifilm X-T3/X-T4 cage, quick release top handle, Arca and Manfrotto quick release baseplates, a clamp to attach an HDMI cable comfortably to the cage (one specifically for the X-T3 and one for the X-T4), and finally the Tiltaing Side Power Handle with Run/Stop Type I (F570 Battery) along with the compatible Fujifilm X series R/S cable.

Compatible with Type II Baseplates and Type I Side Handles.

This Compact NATO top handle easily and securely attaches to the top of the Sony a7 IV full camera cage.

It provides several 1/4”-20 and 3/8”-16 mounting points as well as one cold shoe mounting point on the front of the handle.

Protect and store your Follow Focus Kit in this waterproof safety case.

This camera cage is the perfect starting point when looking to expand the functionality of your camera via additional accessories in order to improve your workflow and save time while shooting.

The cage features various mounting points including ¼”-20 and 3/8″-16 threads with locating points, as well as a cold shoe receiver, and threads for an optional 15mm Rod Holder. (not included)

The bottom of the cage features a ¼”-20 thread for connecting various quick release plates as well as a magnetically mounted multi-tool, perfect for assembling the cage or mounting accessories.

The Arca-Swiss Bottom Plate allows users to quickly transition between compatible gimbals such as the RS3 Pro or Arca based tripods.

Please note, this cage utilizes DJI’s standard for ARCA and is not compatible with all receivers. Compatibility is not guaranteed.

The cage connects to the camera body via a single ¼”-20 screw and features two security clamps on either side which helps stabilize the camera against the cage in order to limit rotation.

This cage offers protection for your camera body and features various options for mounting accessories including: NATO Rail, Cold Shoe, 3/8″-16 and 1/4”-20 threads with Locating Pins.

The bottom plate features a Dual Directional Arca Swiss Bottom Plate which can easily mount to the DJI RS3 Pro or our Modular Baseplate Type I.

Please note: this cage utilizes DJI’s standard for ARCA and is not compatible with all receivers. Compatibility is not guaranteed.

The included Cable Clamp helps ensure that any connected cables are mounted securely which is especially important when recording externally.

The unique anti-slip mesh pattern that surrounds the camera’s hand grip offers improved comfort for long-term shooting.

The design features three points of contact between the camera and cage via two security attachment points on either side.

The Built-in Multi-Functional screwdriver can be magnetically stored for convenient access.

This 95mm Cinema Adapter Ring for the Tilta Mirage Matte Box allows you to mount the matte box to a cine lens with an 95mm front diameter.

- Custom Designed for the Sony ZVE-10 Camera Body
- Mount Accessories via 1/4"-20 Threads and a Cold Shoe Receiver on the Bottom Plate
- Accessible Design Maintains Easy Access to Camera Ports, Function Buttons, and Battery Compartment
- Highly Compatible with Accessories like Sony ECM-W2BT & Wireless Shooting Grip
- Lightweight Design Greatly Improves Functionality while Maintaining a Compact Form Factor

The Xeno Top Handle features several different mounting options allowing it to be mounted to a variety of camera cages and systems.

The optional connection types include: 1/4″-20 with Locating Pins, NATO, Dual 1/4″-20 thumbscrews and Cold Shoe.

The handle itself features a large silicone padded grip which makes operating or handling more comfortable and secure.

The handle features numerous mounting points for additional accessories such as 1/4″-20 and 3/8″-16 threads with locating points.

The handle also features a Cold Shoe Receiver with a Safety Release Pin as well as an Arri Standard Locating Thread.

- Camera Communication for Adjusting Settings such as ISO, Shutter Speed, & Frame Rate via Wifi, Bluetooth & USB-C
- Multiple Motors Can be Controlled by the Hand Unit Alone, Up to 3 Motors for Focus, Iris, & Zoom via an External Handle (optional)
- Lens Mapping Functionality Displays Real Time Focal Distance Information for More Accurate Focus Pulling
- Compatible with Nucleus M & Nano, DJI Focus Motors, RS2 & RS3 Pro Gimbals, as well as Cameras from Canon, Sony, Black Magic Design and More
- Touch Screen Display Provides Easy Access to Advanced Features and Enhanced

- Nucleus Support Accommodates Control for Nucleus Nano II, Nucleus M and Nucleus Nano
- Dual Motor Control via Focus Dial and Motor Compatible Joystick
- Expanded Power for the Nano II Hand Wheel via the NATO Mount Contact Pins
- Mounting Points Perfect for Shoulder Rig Setups or for Mounting External Monitors
- Gimbal Ready Capability Supports DJI RS2 and RS3 Pro via Optional Wireless Receiver Module

- Camera Communication for Adjusting Settings such as ISO, Shutter Speed, & Frame Rate via Wifi, Bluetooth & USB-C
- Multiple Motors Can be Controlled by the Hand Wheel, with Expansion Options Supporting up to 4 Motors when used with the Control Handle (optional)
- Lens Mapping Displays Real Time Focal Distance Information for More Accurate Focus Pulling
- Compatible with Nucleus M, Nano, DJI Focus Motors, DJ Ronin S Series Gimbals, as well as Canon, Sony, Blackmagic Design Cameras
- Touch Screen Display Provides Easy Access to Advanced Features and Streamlines on Set Workflow

Tilta TA-T23-HCC-B kamerabur 1/4" Grå

Designed for Tiltaing camera cages, the Left-Side Advanced Focus Handle, allows you to connect to the optional Nucleus Nano motor to control focus via a built-in finger wheel. It also features a record button for triggering record on/off over an optional Tilta R/S cable connection to compatible cameras. Multiple R/S cables are available, depending on your camera.

The handle attaches to the left side of your Tiltaing cage using your choice of an optional dedicated Left Side Handle Adapter—the Type IV, V, or VI version. Each of these attachment adapters use a different mount type, such as rosette or NATA rail.

The handle accepts a Sony F570 battery, sold separately. An included USB cable connects the handle to your Nucleus Nano motor to power it off the F570 battery and to allow finger-wheel focus control.

There are two connections on the handle: an 8V regulated USB Type-C output (where the USB cable plugs in) and 12 VDC output.

Tilta TA-LSR-B kameramonteringstilbehør

Tilta TGA-ANA kameramonteringstilbehør Skinne

Tilta TA-T01-A kamerabur 1/4, 3/8" Grå

- Minimizes Wear and Tear Over Time
- Supports Advanced Side Handles and Compact NATO Top Handle
- Mount accessories via ARRI Rosette, Cold Shoe, M3 and 1/4"-20 Threads with Locating Pins
- Silicon padding protects Camera Body and Enhances Connection Between Camera and Cage
- Magnetic screwdriver provides Convenient Option for Quick Assembly or Adjustments

- Protective Armor Minimizes Wear and Supports Various Accessories
- Top Handle Utilizes NATO Connection for Secure Handling, Operating, and Mounting of Accessories
- Mounting Options include NATO Rail, Rosette, Cold Shoe, and 1/4"-20 Threads with Locating Pins
- Security Attachment and Multiple Points of Contact Improve Connection Between Camera and Cage
- HDMI Security via Cable Adapter and Cable Clamp Attachment

This Side Handle Attachment allows you to mount your Advanced Left Side Wooden Handle via a NATO Rail Connection.

This is the perfect option for our RED Raptor Cage, RED Komodo Cage, or any other camera cage that features a NATO Rail.

This attachment type can also be adapted to work with almost any cage via the included 36mm NATO Rail Attachment that can mount via 1/4″-20.

Packing list:
(1) Tiltaing Side Handle Attachment Type I
(4) Screws

This camera cage provides complete protective armor for the Fujifilm X-T3 and X-T4 cameras.

It provides several 1/4”-20 mounting points as well as two cold shoe mounting points.

The base of the cage also provides several mounting holes when attaching your camera to gimbals to more easily fine tune the balance of your setup.

A variety of different baseplates can be attached to the bottom of the cage, allowing for various rod mounting and optional power supply configurations.

The quick release top handle and various optional side handles can be attached to the cage to provide for different ways to comfortably operate your camera setup.

This kit of the Fujifilm X-T3/X-T4 cage includes: the base Fujifilm X-T3/X-T4 cage, quick release top handle, Arca and Manfrotto quick release baseplates, as well as a clamp to attach an HDMI cable comfortably to the cage (one specifically for the X-T3 and one for the X-T4).

Compatible with Type II Baseplates and Type I Side Handles.

Tilta Right Side Wooden Handle 2.0 Håndtak

Tilta Mini Articulating Arm Monterings arm