Tilta Foto- & Videotilbehør - side 3

Tilta Right Side Wooden Handle 2.0 Håndtak

Tilta Mini Articulating Arm Monterings arm

Tilta FF-T07 følgefokus-system Følg fokus-sett

This camera cage provides complete protective armor for the Fujifilm X-T3 and X-T4 cameras.

It provides several 1/4”-20 mounting points as well as two cold shoe mounting points.

The base of the cage also provides several mounting holes when attaching your camera to gimbals to more easily fine tune the balance of your setup.

A variety of different baseplates can be attached to the bottom of the cage, allowing for various rod mounting and optional power supply configurations.

The quick release top handle and various optional side handles can be attached to the cage to provide for different ways to comfortably operate your camera setup.

This kit of the Fujifilm X-T3/X-T4 cage includes: the base Fujifilm X-T3/X-T4 cage, quick release top handle, Arca and Manfrotto quick release baseplates, as well as a clamp to attach an HDMI cable comfortably to the cage (one specifically for the X-T3 and one for the X-T4).

Compatible with Type II Baseplates and Type I Side Handles.

The Quick Release Baseplate for Canon C500 Mk II/C300 Mk III connects to your camera via 1/4″-20 and 3/8″-16 tie down screws and features a non-slip, cushioned shoulder pad designed to be comfortable and secure.

The dual rosettes on each side of the baseplate allows users to quickly mount extension arms for better handheld support while the lens adapter support allows you to attach various lens mount adapters via a 1/4″-20 screw.

Front and back 15mm LWS rod supports allows you to easily mount accessories both in front of and behind the shoulder pad.

The baseplate’s VCT locking extension and locking toggle allows you to choose between mounting the baseplate to either a standard VCT plate or a Tilta standard dovetail plate.

Tilta TA-T50-FCC-B kamerabur 1/4" Sort

Tilta TGA-DHB2 kameramonteringstilbehør Kamerahåndtak

Tilta ES-T20-BTP-V kameramonteringstilbehør Batteriplate

The Xeno Top Handle features several different mounting options allowing it to be mounted to a variety of camera cages and systems.

The optional connection types include: 1/4″-20 with Locating Pins, NATO, Dual 1/4″-20 thumbscrews and Cold Shoe.

The handle itself features a large silicone padded grip which makes operating or handling more comfortable and secure.

The handle features numerous mounting points for additional accessories such as 1/4″-20 and 3/8″-16 threads with locating points.

The handle also features a Cold Shoe Receiver with a Safety Release Pin as well as an Arri Standard Locating Thread.

- Mount Accessories via Cold Shoe Receiver, NATO Rail, 3/8"-16 and 1/4"-20 Threads with Locating Points
- NATO Top Handle Expands Mounting Options while Improving Flexibility for Operating & Handling
- Arca Baseplate Supports 15mm Rod Based Accessories and Quickly Transitions to DJI Ronin
- Wooden Handle Features Ergonomic Design and Adjustable Positions for Maximum Comfort
- Cable Clamp Secures Cables in Place with Convenient Thumb Screw Design

The Xeno Top Handle features several different mounting options allowing it to be mounted to a variety of camera cages and systems.

The optional connection types include: 1/4″-20 with Locating Pins, NATO, Dual 1/4″-20 thumbscrews and Cold Shoe.

The handle itself features a large silicone padded grip which makes operating or handling more comfortable and secure.

The handle features numerous mounting points for additional accessories such as 1/4″-20 and 3/8″-16 threads with locating points.

The handle also features a Cold Shoe Receiver with a Safety Release Pin as well as an Arri Standard Locating Thread.

- Mount Accessories via Cold Shoe Receivers, NATO Rail and 1/4"-20 Threads with Locating Points
- Custom Designed for the Sony a6700 Camera Body
- Arca Ready via Compatible Bottom Plate Perfect for DJI Ronin and Select Tripods
- Compatible with Additional Accessories like the Sony ECM-W2BT and Tilta Cooling System for Sony a6700
- HDMI Clamp Secures Cables in Place with Convenient Thumb Screw Design

- 3-channel wireless lens control unit
- Control focus, iris, and/or zoom
- Short-, medium-, and long-range transmission options
- 15-channel selection minimizes outside interference
- Powered via two 18650 rechargeable lithium-ion batteries (not included)
- Up to 10-hour runtime on a single charge
- Ambidextrous design with large wood-edged knob

- Flexible For Different Scenarios
- Custom Fit Design With Easy Access
- Multiple Locking Mechanisms To Secure Installation
- Modular Quick-Release Cable Clamp
- Easy Assemble

- Mount Accessories via Cold Shoe Receiver, NATO Rail, 3/8"-16 and 1/4"-20 Threads with Locating Points
- Custom Designed for the Fujifilm X-S20 Camera Body
- Arca Ready via Compatible Bottom Plate Perfect for DJI Ronin and Compatible Tripods
- NATO Top Handle Expands Mounting Options while Improving Flexibility for Operating & Handling
- Cable Clamp Secures Cables in Place with Convenient Thumb Screw Design

- Custom Designed for the Sony ZV-1, ZV-1F, and ZV-1M2 Camera Bodies
- Mount Accessories via Cold Shoe Receiver and 1/4"-20 Threads
- Horizontal & Vertical Shooting Configurations via Mounting Points on Bottom and Side
- Integrated Handgrip Creates a More Comfortable Operating Experience
- Lightweight & Durable Aluminum and Stainless Steel Construction

These cables for the Nucleus-M give you run/stop capabilities in camera systems that support it. Simply plug the 7-pin end of the cable into one of the motors and the other end into the R/S port of the camera.

Note that this cable was specifically designed for the Nucleus-M so the R/S function only works with the Nucleus-M’s own hand unit and hand grips.

Weight: 0.09lbs
Length: 68.6cm
Color: Black
Materials: Copper, rubber, aluminum-alloy

Properties handle frame. Integrated power line and contacts enable wireless power supply. Power supply of gimbal and other accessories such as a monitor via optional V-Mount battery plate and optional power distribution module. Control options for focus, zoom, iris and gimbal settings via side handles. One 18650 battery is required to use the handles, which is not included in the scope of delivery.

Features carry bag: offers space for the extended grip frame including DJI RS 2 / RSC 2. Outer material and zipper are water-repellent. Partition in the middle. Various small pockets and pouches for storing accessories

Included supply:
1x Ring Grip Module, top (TGA-ARG-TK-UP)
1x Ring Grip Module, below (TGA-ARG-TK-DOWN)
1x receiver module for DJI RS 2 (TGA-WCR)
1x Transmitter / Handgrip Controller with Gimbal Control Function for DJI RS 2 (TGA-ARG-TK-RCH1)
1x transmitter / handle control unit (2 channel) to control focus, iris or zoom (TGA-ARG-TK-WCH1)

This 18mm NATO Rail Attachment can attach to the Tiltaing camera cages via two 1/4″-20 screws. This allows you to attach the various NATO rail-based handles to your setup to give you a more comfortable operating experience.

This “half” camera cage provides protective armor for the Sony a7S III camera. It provides several 1/4”-20 mounting points as well as one cold shoe mounting point.

The base of the cage also provides several mounting holes when attaching your camera to gimbals to more easily fine tune the balance of your setup.

A variety of different baseplates can be attached to the bottom of the cage, allowing for various rod mounting and optional power supply configurations.

A Tiltaing Lightweight Quick Release Top Handle with Arri Locating Pins can be attached to the cage to provide for a comfortable camera operating setup.

The Tilta Camera Cage for DJI Ronin 4D Flex is the perfect foundation for taking your 4D Flex to the next level.

This camera cage expands your options for rigging the 4D by allowing you to build the system in a more traditional studio setup, which gives you unparalleled versatility and control.

The cage offers a variety of mounting options including Cold Shoe Receivers, NATO Rail and 1/4″-20 threads with locating pins.

The quick release mounting system ensures quick transitions between setups, saving you valuable time on set.

Additionally, the cage features multiple mounting points to the camera body which provide improved security for your camera and accessories.

When used with our optional accessories such as the 15mm LWS Baseplate and 15mm rods, this system becomes the perfect option for using heavier zoom lenses with the 4D Flex.

Elevate your DJI Ronin 4D Flex experience with the Tilta Camera Cage – the ultimate tool for greatly improving the flexibility to mount accessories to your system!

The Nucleus Nano II Hand Wheel to DJI Ronin Control Adapter is the perfect option for controlling the DJI Focus Motor via the Nano II Hand Wheel.

This adapter mounts to either side of the RS2 or RS3 Pro’s NATO Rail Mounting Points and utilizes two screws for a secure connection.

The adapter features two sets of contact pins for the Nano II Hand Wheel, allowing users to mount the unit at different heights based on preference or clearance restrictions with the pan motor.

The Hand Wheel mounts to the adapter via its internal NATO clamp and can draw power from the gimbal body in addition to being able to control the motor.

- Protective Armor for Sony FX3 & FX30 Minimizes Wear and Supports Accessories
- Mount Accessories via Top Plate NATO Rail, Cold Shoe Receivers, 1/4"-20 and 3/8"-16 Threads with Locating Pins
- Arca Baseplate with Universal Design Supports Fast Transitions to Ronin Series Gimbals
- NATO Top Handle Provides Improved Flexibility When Operating and Handling
- Cable Clamp Secures Cables in Place with Convenient Thumb Screw Design

The Vertical Mounting Plate features a built in cold shoe, 1/4″-20 and 3/8″-16 threads for mounting wireless video transmitters, on-board monitors, external microphones and other accessories while shooting in a standard horizontal configuration.

This plate can also be used in conjunction with the Quick Release Baseplate for Sony FX6 in order to mount the camera in a vertical configuration.

The Armor Man 3.0 was designed to offer comfort and support while operating your gimbal by transferring the weight of the gimbal to your body’s core, taking significant weight off your arms. This allows you to operate your gimbal comfortably, for a much longer period of time while not sacrificing flexibility or performance.

Two mechanical arms with shock-absorbing stabilized systems attach to the back of the adjustable vest or on top of the vest in high mode. When engaged, the arms have two adjustable tension knobs on each arm to allow you to adjust the tension in relation to the weight of your gimbal rig as well as your preferred operation style.

The arms attach to any top bar gimbal system or gimbal ring system with the provided mounts or support cups, which you attach by just sliding the attachment right into the arms. Paired with the Universal Gimbal Ring Adapters and Nucleus M, the Armor Man 3.0 can become a one man operating system.

When you’re done operating, simply disengage the arms by pulling the release cords for each arm (in regular mode) and then comfortably rest them on the sides of the vest with the attached arm receiver. This allows you to keep the vest on in-between shots and then when you’re ready to operate again, simply re-engage the arms and re-attach the gimbal.